Products in APT on Wholesale Tool

Cut threads on any lathe fitted with a Morse taper tailstock Improves thread quality with fewer part rejections over hand-held method Four to five times faster than threading with a single point tool Reduces chance for operator injury Heads or shanks available separately; see description below for…

Related Searches: Lathe Die Holder | Die Holder | Tailstock | Morse Taper

Click to View all SKUs

$55.50 - $86.25

Super-Lok Boring Bars (APT)

The most simple, inexpensive insert type boring bar you can buy. No special components to stock or replace. The insert is held rigidly, positively and accurately by a unique clamping action -- it can't move! The pocket design is like nothing else on the market. Each tool includes one C-6 insert.

Related Searches: Boring Bar

Click to View all SKUs

Click to View Less SKUs

1088-0005 - * Insert I.C.: 1/4" * Max Bore: 1-1/2" * Min Bore: 1/2" * OAL: 3" * Shank: 1/2" * Tool No.: LB8S	$41.40
1088-0010 - * Insert I.C.: 1/4" * Max Bore: 2-1/4" * Min Bore: 1/2" * OAL: 3-3/4" * Shank: 1/2" * Tool No.: LB8M	$42.60
1088-0015 - * Insert I.C.: 1/4" * Max Bore: 1-3/4" * Min Bore: 9/16" * OAL: 3-1/4" * Shank: 1/2" * Tool No.: LB9S	$41.40
1088-0020 - * Insert I.C.: 1/4" * Max Bore: 2-5/8" * Min Bore: 9/16" * OAL: 4-1/8" * Shank: 1/2" * Tool No.: LB9M	$44.70
1088-0025 - * Insert I.C.: 1/4" * Max Bore: 2" * Min Bore: 5/8" * OAL: 3-1/2" * Shank: 1/2" * Tool No.: LB10S	$42.60
1088-0030 - * Insert I.C.: 1/4" * Max Bore: 3" * Min Bore: 5/8" * OAL: 4-1/2" * Shank: 1/2" * Tool No.: LB10M	$44.70
1088-0035 - * Insert I.C.: 1/4" * Max Bore: 1-1/2" * Min Bore: 1/2" * OAL: 3-1/4" * Shank: 5/8" * Tool No.: LC8S	$47.20
1088-0040 - * Insert I.C.: 1/4" * Max Bore: 2-1/4" * Min Bore: 1/2" * OAL: 4" * Shank: 5/8" * Tool No.: LC8M	$48.90
1088-0045 - * Insert I.C.: 1/4" * Max Bore: 2" * Min Bore: 5/8" * OAL: 3-3/4" * Shank: 5/8" * Tool No.: LC10S	$47.20
1088-0050 - * Insert I.C.: 1/4" * Max Bore: 3" * Min Bore: 5/8" * OAL: 4-3/4" * Shank: 5/8" * Tool No.: LC10M	$50.30
1088-0055 - * Insert I.C.: 3/8" * Max Bore: 2-1/2" * Min Bore: 3/4" * OAL: 4-1/2" * Shank: 5/8" * Tool No.: LC12S	$50.30
1088-0060 - * Insert I.C.: 3/8" * Max Bore: 3-3/4" * Min Bore: 3/4" * OAL: 5-1/2" * Shank: 5/8" * Tool No.: LC12M	$53.80
1088-0065 - * Insert I.C.: 1/4" * Max Bore: 1-1/2" * Min Bore: 1/2" * OAL: 3-1/2" * Shank: 3/4" * Tool No.: LD8S	$53.80
1088-0070 - * Insert I.C.: 1/4" * Max Bore: 2-1/4" * Min Bore: 1/2" * OAL: 4-1/4" * Shank: 3/4" * Tool No.: LD8M	$53.80
1088-0075 - * Insert I.C.: 1/4" * Max Bore: 2" * Min Bore: 5/8" * OAL: 4" * Shank: 3/4" * Tool No.: LD10S	$53.80
1088-0080 - * Insert I.C.: 1/4" * Max Bore: 3" * Min Bore: 5/8" * OAL: 5" * Shank: 3/4" * Tool No.: LD10M	$57.30
1088-0085 - * Insert I.C.: 3/8" * Max Bore: 2-1/2" * Min Bore: 3/4" * OAL: 4-1/2" * Shank: 3/4" * Tool No.: LD12S	$57.30
1088-0090 - * Insert I.C.: 3/8" * Max Bore: 3-3/4" * Min Bore: 3/4" * OAL: 5-3/4" * Shank: 3/4" * Tool No.: LD12M	$59.10
1088-0095 - * Insert I.C.: 3/8" * Max Bore: 3" * Min Bore: 13/16" * OAL: 5" * Shank: 3/4" * Tool No.: LD13S	$59.10
1088-0100 - * Insert I.C.: 3/8" * Max Bore: 4-1/2" * Min Bore: 13/16" * OAL: 6-1/2" * Shank: 3/4" * Tool No.: LD13M	$61.60

$41.40 - $61.60

Dyna-Sink 82Ã‚Â° & 90Ã‚Â° Countersink & Deburring Tools

Deburr and countersink large diameter holes Use at high surface speeds Better finishes Quick and inexpensive Inserts need to be replaced only after a large number of regrinds (inserts sold separately) Regrind is quick and accurate

Related Searches: Countersink

Click to View all SKUs

$27.50 - $57.00

2-1/2" Boring Head & Carbide Boring Bar Sets

Set will meet many of your boring needs. It features an all steel boring head and nine boring bars. The boring head is made in the USA and features standard 1/2-inch tooling capacity, direct read .001 micrometer dial and hardened steel construction. Body size is 2-1/2 inches. Boring bar set is…

Related Searches: Boring Head | R8 | Boring Bar | Boring Bar Set

Click to View all SKUs

$135.00 - $184.00

E Series Multi-Tool Machine Drilling Set -- Taper Shank

The Multi-Tool system from APT/Michigan Drill is the only inexpensive method of large diameter hole production (up to 3 inches) on light duty, low horsepower equipment. Some examples are Bridgeport milling machines, lathes, 1-horsepower drill presses and portable magnetic drills. You can also spot…

Related Searches: Mill Drill | Face Mill

$429.00

Tri-Dex Indexable End Mills (APT)

Positive rake, all straight shank end mills have an overall length of 3-7/8 inches and a shank length of 2-1/4 inches. Constructed with a minimum of parts and with instant new cutting edges. Mills are very adaptable to numerically controlled machining. They use standard 3/8-inch inner circle…

Related Searches: R8 | Indexer

Click to View all SKUs

$24.65

E Series Multi-Tool Machine Drilling Set -- Straight Shank

Related Searches: Spot Face | Counterbore | Mill Drill Lathe

$429.00

D-Series Multi-Tool Machine Drilling Set -- Taper Shank

Related Searches: Counterbore

$386.00

D Series Multi-Tool Machine Drilling Set -- 1/2" Shank

Related Searches: Spot Face | Mill Drill Lathe

$305.00

Tri-Lead Boring Tool

Made of tempered alloy steel for proper boring rigidity. Chipbreaker feature of bar breaks chip into small tight rolls, thus eliminating winding of long stringy chips around tool and clogging of work area. Cartridges are hardened to 60-64 Rockwell, and ground to +.0005 accuracy to assure proper…

Related Searches: Apt | Lathe Tools | Boring Bar

Click to View all SKUs

$72.60 - $295.00

Page 1 2 3 4 of 4 | Next

Site Search by