Replacement collets for WT die grinder no. 3080-0060.

Click to View all SKUs

Click to View Less SKUs

3080-0064 - * Size: 1/4" * Type: Threaded	$6.00
3080-0065 - * Size: 1/4" * Type: Non-threaded	$6.00
3080-0066 - * Size: 1/8" * Type: Non-threaded	$6.00
3080-0067 - * Size: 1/8" * Type: Threaded	$6.00

Full 1/32-inch range of collapse Concentricity within 0.0005-inch TIR at collet nose assembled with chuck Self release for rapid, easy operation Interchangeable with all DA-180 collets and collet chucks

Related Searches: Collet

Click to View all SKUs

Click to View Less SKUs

1630-0860 - * Length: 3" * Size: 1/4"-3/4" range * Type: NMTB 30 taper	$111.00
1630-0865 - * Length: 3" * Size: 1/4"-3/4" rang * Type: NMTB 40 taper	$136.50
1630-0870 - * Length: 3-1/2" * Size: 1/4"-3/4" range * Type: NMTB 50 taper	$164.50
1630-0875 - * Length: 3" * Size: 1/4"-3/4" range * Type: 1-1/4" shank	$124.00
1630-0880 - * Length: 5-1/2" * Size: 1/4"-3/4" range * Type: 1-1/4" shank	$124.00

1/4-inch collets for Florida Pneumatic die grinders.

Wide range of collet adaptability makes this tool ideal for holding drills, taps, chucks and boring bars. These tools can be held extremely rigid without scarring.

Related Searches: Tool Holder | Lathe Tool Holder | 5c

Click to View all SKUs

Click to View Less SKUs

1641-1250 - * A: 1-1/8" * B: 1-1/2" * C: 3-1/4" * Type: Super Quick Change	$154.00
1641-1255 - * A: 1-1/8" * B: 1-1/2" * C: 3-1/4" * Type: Super Quick Change	$160.00
1641-1260 - * A: 1-3/8" * B: 1-5/8" * C: 3-3/4" * Type: Super Quick Change	$180.00
1641-1265 - * A: 1-3/8" * B: 1-5/8" * C: 3-3/4" * Type: Super Quick Change	$204.00
1641-1280 - * A: 1-1/8" * B: 1-1/2" * C: 3-1/4" * Type: Quadra	$173.00
1641-1285 - * A: 1-1/8" * B: 1-1/2" * C: 3-1/4" * Type: Quadra	$185.00
1641-1290 - * A: 1-3/8" * B: 1-5/8" * C: 3-3/8" * Type: Quadra	$213.00
1641-1295 - * A: 1-3/8" * B: 1-5/8" * C: 3-3/4" * Type: Quadra	$254.00
1641-1305 - * A: 1-1/2 * B: 2" * C: 5-3/4 * Type: Quadra	$299.00

…table stop prevents motor from inadvertently rotating out of base Standard equipment: router motor, base, 1/4-inch collet, collet wrenches and operating manual ISO certified Collets: 1/4", 1/2" RPM: 10,000 to 27,000 Motor: 1-3/4 HP, 120 VAC, 25-60 Hz, 11 amps

Auto-release collet system ends "frozen" bits Unique design puts bottom bearing closer to work for minimum bit run-out and vibration Precision machined aluminum motor housing and base 100 percent sealed ball bearings Standard equipment: router motor, base, 1/2-inch collet, collet wrenches and operating…

High speed steel. Use in an R8 collet.

Related Searches: End Mill | R8 Collet | R8

Click to View all SKUs

Click to View Less SKUs

0902-0055 - * Flute Length: 5/8" * Flute(s): 4 * Mill Dia: 1/4" * OAL: 2-1/4" * Shank: 1/4" * Type: TiN coated	$2.50
0902-0060 - * Flute Length: 3/8" * Flute(s): 4 * Mill Dia: 1/4" * OAL: 2-1/4" * Shank: 1/4" * Type: TiN coated	$2.25
0902-0075 - * Flute Length: 11/16" * Flute(s): 4 * Mill Dia: 5/16" * OAL: 1-3/4" * Shank: 5/16" * Type: Cobalt	$2.50
0902-0090 - * Flute Length: 11/16" * Flute(s): 4 * Mill Dia: 5/16" * OAL: 2-1/2" * Shank: 5/16" * Type: Cobalt	$2.25
0902-0095 - * Flute Length: 7/16" * Flute(s): 4 * Mill Dia: 5/32" * OAL: 2-1/2" * Shank: 1/4" * Type: Cobalt	$2.50
0902-0100 - * Flute Length: 5/16" * Flute(s): 4 * Mill Dia: 5/32" * OAL: 1-1/4" * Shank: 5/32" * Type: Cobalt	$2.00
0902-0120 - * Flute Length: 7/16" * Flute(s): 4 * Mill Dia: 5/32" * OAL: 2-1/4" * Shank: 1/4" * Type: Cobalt	$2.25
0902-0125 - * Flute Length: 5/8" * Flute(s): 4 * Mill Dia: 1/4" * OAL: 2-1/4" * Shank: 1/4" * Type: Cobalt	$2.75
0902-0135 - * Flute Length: 3/8" * Flute(s): 4 * Mill Dia: 1/8" * OAL: 2-1/4" * Shank: 1/4" * Type: Cobalt	$2.25
0902-0145 - * Flute Length: 1/2" * Flute(s): 4 * Mill Dia: 3/16" * OAL: 2-1/4" * Shank: 1/4" * Type: Cobalt	$2.75
0902-0160 - * Flute Length: 5/8" * Flute(s): 4 * Mill Dia: 3/16" * OAL: 2-3/8" * Shank: 1/4" * Type: Cobalt	$2.50
0902-0170 - * Flute Length: 7/16" * Flute(s): 4 * Mill Dia: 5/32" * OAL: 2-1/4" * Shank: 1/4" * Type: Cobalt	$2.50

…and plunge router bases, so you get the versatility of two of the most popular routers today. Other features: Motor with lever release Auto-release collet system ends "frozen" bits 2-1/2 inch plunge range with fully enclosed springs, depth rod and six-position step turret Precision machined aluminum motor…

…or 1-5/8-inch non-reinforced wheel can be attached to this versatile grinder for deburring and shaping Includes collet and 11/16- and 1/2-inch open-end wrenches Length: 13-1/2" Collets: 1/4" Cord Length: 8 ft. RPM: 21,000 Net Weight: 4.5 lbs. Motor: 120V AC/DC, 4.5 amp

…versatile grinder for deburring and shaping larger workpieces Trigger switch on back handle Comes with collet, fixed cord, and 11/16-, 1/2- and 1-inch open end wrenches Net Weight: 7.8 lbs. Collets: 1/4" Length: 21-1/2" Motor: 120V AC/DC, 11 amps RPM: 14,500 no load Cord Length: 9 ft.