High strength cast iron. Plates are ground square and parallel on all flat surfaces. Inside surface is painted gray.

Related Searches: Angle | Surface Plate

Click to View all SKUs

Click to View Less SKUs

2128-0005 - * Net Weight: 4 lbs. * Size: 4-1/2" W x 3-1/2" H x 3" D * Slot Width: 7/16" * Slot(s): 3	$9.95
2128-0010 - * Net Weight: 10-3/4 lbs. * Size: 6" W x 5" H x 4-1/2" D * Slot Width: 1/2" * Slot(s): 3	$23.95
2128-0015 - * Net Weight: 17-1/2 lbs. * Size: 8" W x 6" H x 5" D * Slot Width: 1/2" * Slot(s): 6	$38.95
2128-0020 - * Net Weight: 33-3/4 lbs. * Size: 10" W x 8" H x 6" D * Slot Width: 5/8" * Slot(s): 6	$69.95

Made of steel, hardened and ground flat, square and parallel. Tapped holes on all models are either 1/4-20 or 3/8-16 to allow the use of standard, readily available clamping accessories.

Related Searches: Angle

Click to View all SKUs

Click to View Less SKUs

2130-0005 - * Net Weight: 5 lbs. * Size: 3" x 3" x 2-3/4" x 1" x 1/2" * Type: 2 step	$47.00
2130-0010 - * Net Weight: 6 lbs. * Size: 4" x 3" x 3" x 1" * Type: 1 step	$49.00
2130-0015 - * Net Weight: 10 lbs. * Size: 4" x 4" x 4" x 1-1/4" * Type: 1 step	$59.00
2130-0020 - * Net Weight: 14 lbs. * Size: 6" x 4" x 4" x 1-1/4" * Type: 1 step	$69.00
2130-0025 - * Net Weight: 20 lbs. * Size: 4" x 6" x 6" x 1-1/4" * Type: 1 step	$159.00

Hardened and ground steel and precisely ground angles for setups in tooling, production and inspection. Each block is 9/32 inch thick, with four 11/32-inch holes for easy mounting. Sizes are degrees, 30 x 60 x 90, and 45 x 45 x 90; and inches, 4 x 3-15/32 x 2, and 3 x 3 x 4-3/8.

Related Searches: Angle Block

Made of high quality fine grained cast iron, stress relieved. All faces and ends machined and finished square and parallel.

Click to View all SKUs

Click to View Less SKUs

2131-0005 - * Size: 3-3/4" x 4" x 5" * Thickness: 3/4"	$25.85
2131-0010 - * Size: 4" x 4" x 6" * Thickness: 7/8"	$24.50
2131-0015 - * Size: 4" x 5" x 6" * Thickness: 7/8"	$34.00
2131-0020 - * Size: 4-1/2" x 5" x 6" * Thickness: 7/8"	$44.00
2131-0025 - * Size: 5" x 8" x 12" * Thickness: 1-1/4"	$97.50
2131-0030 - * Size: 5-1/2" x 7" x 10" * Thickness: 1-1/8"	$77.75
2131-0035 - * Size: 5-1/2" x 8" x 10" * Thickness: 1-1/8"	$87.60
2131-0040 - * Size: 6" x 6" x 8" * Thickness: 7/8"	$65.00
2131-0045 - * Size: 8" x 10" x 12" * Thickness: 1-1/4"	$125.00
2131-0050 - * Size: 8" x 9" x 16" * Thickness: 1-3/8"	$187.00

Made of high quality fine grained cast iron, stress relieved Extra thick and ribbed construction Square and parallel within .002 inch per 6 inches

Click to View all SKUs

Click to View Less SKUs

1701-0650 - * Depth: 2" * Height: 2" * Net Weight: 1 lb. * Wall Thickness: 1/2" * Width: 2"	$32.00 $31.00
1701-0660 - * Depth: 3" * Height: 3" * Net Weight: 3 lbs. * Wall Thickness: 1/2" * Width: 3"	$35.00 $34.00
1701-0670 - * Depth: 4" * Height: 4" * Net Weight: 7 lbs. * Wall Thickness: 5/8" * Width: 4"	$57.00 $55.00
1701-0680 - * Depth: 5" * Height: 5" * Net Weight: 11 lbs. * Wall Thickness: 11/16" * Width: 5"	$83.00 $80.00
1701-0690 - * Depth: 6" * Height: 6" * Net Weight: 17 lbs. * Wall Thickness: 3/4" * Width: 6"	$118.00 $80.00
1701-0700 - * Depth: 8" * Height: 8" * Net Weight: 39 lbs. * Wall Thickness: 7/8" * Width: 8"	$207.00 $200.00
1701-0710 - * Depth: 11-3/4" * Height: 12" * Net Weight: 135 lbs. * Wall Thickness: 1-1/8" * Width: 11-3/4	$483.00 $468.00

No sine vise, sine plate, angle vise, angle chart or block gage needed Hardness of HRC 45-50 All ground finish Consists of 10-, 15- and 30-degree V-blocks; 1-, 2-, 3-, 4- and 5-inch angle plates; and fitted wood case Tolerance: ±1°

Related Searches: Angle Block | Sine Vise

…right for concave and left for convex Four by 90-degree graduation in full 360-degree circle 6-minute Vernier reading Chrome plated One push/pull knob for radius and angle control and for safer and faster operations Setup and dressing time reduced to a minimum Distance: 3/4" between bottom of base…

Chrome steel, hardened and ground Accurate enough for layout and surface plate use Square, parallel and concentric within ±.0001 inch Models 475-015 and 475-020 can be set up on side or bottom angles 90-degree V-angles

Related Searches: V Block | Angle Block | V-blocks

Click to View all SKUs

Click to View Less SKUs

1290-0003 - * Diameter: 3/4" max. bar dia. * Size: 1-1/4" x 1-1/4" x 1-5/8"	$19.00
1290-0005 - * Diameter: 1" max. bar dia. * Size: 1-3/8" x 1-5/8" x 1-3/4"	$29.00
1290-0010 - * Diameter: 1.5" max. bar dia. * Size: 1-5/8" x 1-3/4" x 2-3/4"	$39.00
1290-0015 - * Diameter: 1.5" max. bar dia. * Size: 1-3/4" x 2-1/2" x 2-3/4"	$89.00
1290-0020 - * Diameter: 2-1/8 max. bar dia. * Size: 2-3/4" x 3-1/2" x 4-7/8"	$79.00

The easy way to square your mill. Just zero the indicators on your surface plate, install the spindle square in your milling machine spindle, bring the spindle down to the table and adjust the head until both indicators read the same. It's that easy! Once you use it, you'll never want to square the head…

Precision ground steel Rolls hardened and ground, with accuracy to within .0002. Accuracy of square to within .0002 0- to 60-degree settings Includes support arms Net Weight: 14 lbs. Hole Size: 1/4-20