…will meet many of your boring needs. It features an all steel boring head and nine boring bars. The boring head is made in the USA and features standard 1/2-inch tooling capacity, direct read .001 micrometer dial and hardened steel construction. Body size is 2-1/2 inches. Boring bar set is imported. Bars…

Related Searches: Boring Head | R8 | Boring Bar | Boring Bar Set

Click to View all SKUs

Click to View Less SKUs

2008-0010 - * Max Bore: 4" net 1/2 cross-hole * Shank: 3/4"	$135.00
2008-0015 - * Max Bore: 4" net of 1/2 cross-hole * Shank: R8	$184.00

Grade C-6 for general purpose steel and steel alloys. Other grades available. All shanks are held to .000-.0005 from the nominal size. Shanks are heat treated alloy steel. Finished tool is black oxide coated, tip is diamond ground for instant use.

Related Searches: Borite

Click to View all SKUs

Click to View Less SKUs

1206-0005 - * Max Bore: 3/4" * Min Bore: 5/16" * OAL: 2" * Shank: 3/8" * Tool No.: A5S	$10.00
1206-0010 - * Max Bore: 1-1/8" * Min Bore: 5/16" * OAL: 2-3/8" * Shank: 3/8" * Tool No.: A5M	$10.10
1206-0015 - * Max Bore: 1-1/2" * Min Bore: 5/16" * OAL: 2-3/4" * Shank: 3/8" * Tool No.: A5L	$10.45
1206-0020 - * Max Bore: 15/16" * Min Bore: 3/8" * OAL: 2-3/16" * Shank: 3/8" * Tool No.: A3S	$11.05
1206-0025 - * Max Bore: 1-13/32" * Min Bore: 3/8" * OAL: 2-21/32" * Shank: 3/8" * Tool No.: A3M	$11.45
1206-0030 - * Max Bore: 1-7/8" * Min Bore: 3/8" * OAL: 3-1/8" * Shank: 3/8" * Tool No.: A3L	$11.85
1206-0035 - * Max Bore: 1-1/8" * Min Bore: 7/16" * OAL: 2-3/8" * Shank: 3/8" * Tool No.: A7S	$12.15
1206-0040 - * Max Bore: 1-11/16" * Min Bore: 7/16" * OAL: 2-15/16" * Shank: 3/8" * Tool No.: A7M	$12.45
1206-0045 - * Max Bore: 2-1/4" * Min Bore: 7/16" * OAL: 3-1/2" * Shank: 3/8" * Tool No.: A7L	$12.90
1206-0050 - * Max Bore: 3/4" * Min Bore: 5/16" * OAL: 2-1/4" * Shank: 1/2" * Tool No.: B5S	$13.40
1206-0055 - * Max Bore: 1-1/8" * Min Bore: 5/16" * OAL: 2-5/8" * Shank: 1/2" * Tool No.: B5M	$13.70
1206-0060 - * Max Bore: 1-1/2" * Min Bore: 5/16" * OAL: 3" * Shank: 1/2" * Tool No.: B5L	$14.05
1206-0065 - * Max Bore: 1-1/8" * Min Bore: 7/16" * OAL: 2-5/8" * Shank: 1/2" * Tool No.: B7S	$14.70
1206-0070 - * Max Bore: 1-11/16" * Min Bore: 7/16" * OAL: 3-3/16" * Shank: 1/2" * Tool No.: B7M	$14.95
1206-0075 - * Max Bore: 2-1/4" * Min Bore: 7/16" * OAL: 3-3/4" * Shank: 1/2" * Tool No.: B7L	$15.20
1206-0080 - * Max Bore: 1-1/2" * Min Bore: 9/16" * OAL: 3" * Shank: 1/2" * Tool No.: B9S	$15.80
1206-0085 - * Max Bore: 2-1/4" * Min Bore: 9/16" * OAL: 3-3/4" * Shank: 1/2" * Tool No.: B9M	$12.00
1206-0090 - * Max Bore: 3" * Min Bore: 9/16" * OAL: 4-1/2" * Shank: 1/2" * Tool No.: B9L	$17.90
1206-0095 - * Max Bore: 3/4" * Min Bore: 5/16" * OAL: 2-1/4" * Shank: 5/8" * Tool No.: D5S	$18.85
1206-0100 - * Max Bore: 1-1/8" * Min Bore: 5/16" * OAL: 2-5/8" * Shank: 5/8" * Tool No.: D5M	$20.00
1206-0105 - * Max Bore: 1-1/2" * Min Bore: 5/16" * OAL: 3" * Shank: 5/8" * Tool No.: D5L	$21.00
1206-0110 - * Max Bore: 1-1/8" * Min Bore: 7/16" * OAL: 2-5/8" * Shank: 5/8" * Tool No.: D7SL	$22.75
1206-0115 - * Max Bore: 1-11/16" * Min Bore: 7/16" * OAL: 3-3/16" * Shank: 5/8" * Tool No.: D7M	$23.95
1206-0120 - * Max Bore: 2-1/4" * Min Bore: 7/16" * OAL: 3-3/4" * Shank: 5/8" * Tool No.: D7L	$24.70
1206-0125 - * Max Bore: 1-1/2" * Min Bore: 9/16" * OAL: 3" * Shank: 5/8" * Tool No.: D9S	$26.00
1206-0130 - * Max Bore: 2-1/4" * Min Bore: 9/16" * OAL: 3-3/4" * Shank: 5/8" * Tool No.: D9M	$27.10
1206-0135 - * Max Bore: 3" * Min Bore: 9/16" * OAL: 4-1/2" * Shank: 5/8" * Tool No.: D9L	$21.70
1206-0140 - * Max Bore: 1-7/8" * Min Bore: 11/16" * OAL: 3-3/8" * Shank: 5/8" * Tool No.: D11S	$22.80
1206-0145 - * Max Bore: 2-13/16" * Min Bore: 11/16" * OAL: 4-5/16" * Shank: 5/8" * Tool No.: D11M	$23.55
1206-0150 - * Max Bore: 3-3/4" * Min Bore: 11/16" * OAL: 5-1/4" * Shank: 5/8" * Tool No.: D11L	$24.20
1206-0155 - * Max Bore: 1-1/8" * Min Bore: 7/16" * OAL: 3-1/8" * Shank: 3/4" * Tool No.: C7S	$18.65
1206-0160 - * Max Bore: 1-11/16" * Min Bore: 7/16" * OAL: 3-11/16" * Shank: 3/4" * Tool No.: C7M	$19.25
1206-0165 - * Max Bore: 2-1/4" * Min Bore: 7/16" * OAL: 4-1/4" * Shank: 3/4" * Tool No.: C7L	$19.95
1206-0170 - * Max Bore: 1-1/2" * Min Bore: 7/16" * OAL: 3-1/2" * Shank: 3/4" * Tool No.: C9S	$20.80
1206-0175 - * Max Bore: 2-1/4" * Min Bore: 9/16" * OAL: 4-1/4" * Shank: 3/4" * Tool No.: C9M	$21.60
1206-0180 - * Max Bore: 3" * Min Bore: 9/16" * OAL: 5" * Shank: 3/4" * Tool No.: C9L	$22.20
1206-0185 - * Max Bore: 1-7/8" * Min Bore: 9/16" * OAL: 3-7/8" * Shank: 3/4" * Tool No.: C11S	$23.20
1206-0190 - * Max Bore: 2-13/16" * Min Bore: 11/16" * OAL: 4-13/16" * Shank: 3/4" * Tool No.: C11M	$24.05
1206-0195 - * Max Bore: 3-3/4" * Min Bore: 11/16" * OAL: 5-3/4" * Shank: 3/4" * Tool No.: C11L	$24.60
1206-0200 - * Max Bore: 2-1/4" * Min Bore: 11/16" * OAL: 4-1/4" * Shank: 3/4" * Tool No.: C13S	$26.40
1206-0205 - * Max Bore: 3-3/8" * Min Bore: 13/16" * OAL: 5-3/8" * Shank: 3/4" * Tool No.: C13M	$27.30
1206-0210 - * Max Bore: 4-1/2" * Min Bore: 13/16" * OAL: 6-1/2" * Shank: 3/4" * Tool No.: C13L	$28.30
1206-0215 - * Max Bore: 3" * Min Bore: 9/16" * OAL: 5" * Shank: 1" * Tool No.: E9L	$35.15
1206-0220 - * Max Bore: 3-3/4" * Min Bore: 11/16" * OAL: 5-3/4" * Shank: 1" * Tool No.: E11L	$37.00
1206-0225 - * Max Bore: 4-1/2" * Min Bore: 7/8" * OAL: 6-1/2" * Shank: 1" * Tool No.: E14L	$39.35
1206-0230 - * Max Bore: 4-1/2" * Min Bore: 1-1/16" * OAL: 6-1/2" * Shank: 1" * Tool No.: E18L	$41.80
1206-0235 - * Max Bore: 5-3/4" * Min Bore: 1-1/4" * OAL: 7-3/4" * Shank: 1" * Tool No.: E20L	$44.80
1206-0240 - * Max Bore: 6-1/4" * Min Bore: 1-1/2" * OAL: 8-1/4" * Shank: 1" * Tool No.: E24L	$47.10
1206-0245 - * Max Bore: 7-1/2" * Min Bore: 1-5/8" * OAL: 9-1/2" * Shank: 1" * Tool No.: E26L	$50.60

Here is a small head that will be in constant demand in any shop. Its wide base bearing surface assures maximum rigidity, even when the bar holder is in an offset position. This wide base design is a Criterion innovation that increases bearing surfaces by 50 percent over older models. A choice of…

Related Searches: Criterion | Boring Head

Click to View all SKUs

Click to View Less SKUs

2211-0005 - * Offset: 5/8" * Size: 2" dia. x 2-13/32" OAL; 1/2" hole * Tool No.: DBL-202B	$289.25
2211-0010 - * Diameter: 2" dia. x 2-13/32" OAL; 3/8" hole * Offset: 5/8" * Tool No.: DBL-202A	$289.25

Precision ground shanks Three lengths for each minimum bore size High quality alloy steel for greater rigidity Carbide tip ground square with shank for flat bottom boring Offset taper to provide greater rigidity at cutting point

Related Searches: Boring Bar | Boring Bar Set | Boring Tool

Click to View all SKUs

Click to View Less SKUs

1095-9901 - * Max Bore: 3/4" - 2-1/4" * Min Bore: 5/16" - 7/16" * OAL: 2" - 3-1/2" * Shank: 3/8" * Tool No.: PA5S, PA5M, PA3S, PA3M, PA3L, PA7S, PA7M, PA7L	$15.95
1095-9921 - * Max Bore: 3/4"-3" * Min Bore: 5/16"-9/16" * OAL: 2-1/4" - 4-1/2" * Shank: 1/2" * Tool No.: PB5S, PB5M, PB5L, PB7S, PB7M, PB7L, PB9S, PB9M, PB9L	$19.95
1095-9941 - * Max Bore: 3/4" - 3-3/4" * Min Bore: 5/16"-11/16" * OAL: 2-1/4" - 5-1/4" * Shank: 5/8" * Tool No.: PC5S, PC5M, PC5L, PC7S, PC7M, PC7L, PC9S, PC9M, PC9L, PC11S, PC11M, PC11L	$20.70
1095-9961 - * Max Bore: 1-1/8" - 4-1/2" * Min Bore: 7/16"-13/16" * OAL: 3-1/8" - 6-1/2" * Shank: 3/4" * Tool No.: PD7S, PD7M, PD7L, PD9S, PD9L, PD11S, PD11M, PD11L, PD13S, PD13M, PD13L	$53.00
1095-9980 - * Max Bore: 3-1/16" - 7-1/2" * Min Bore: 5/8" - 1-11/16" * OAL: 5" - 9-1/4" * Shank: 1"	$59.00

Precision bored and honed milling head Chromed large diameter quill High-precision spindle bearings Over 10 inches of front-to-back ram travel Table, knee and saddle have locks Precision ground table Head tilts left or right Graduated scale on column Precision ground dovetail One-shot lubrication system…

Related Searches: Mill | Knee Mill

Click to View all SKUs

Click to View Less SKUs

2005-0055 - * Collets: 1/8"-7/8" capacity * Headstock Swivel: 90° R & L * Height: 87" * Motor: 1-1/2 hp, 1 ph., 115/230V, prewired 115V * Net Weight: 1,544 lbs. * Quill Dia: 3-3/8" * Spindle Distance: 14" to table; to column 6" min., 26-1/2" max. * Spindle Speed(s): 5 (240-1,550 RPM) * Spindle Taper: R8 * Spindle Travel: 5" * T-Slot: (3) 5/8" x 7-7/8" x 35-3/4; 2-1/2 centers * Table Size: 7-7/8" x 35-3/4" * Table Travel: 35" max. longitudinal, 9-1/2" max. cross, 14" max knee * Warranty: 2 years

$5,239.00

2005-0065 - * Collets: 1/8"-7/8" capacity * Headstock Swivel: 90° R & L * Height: 78" * Motor: 1-1/2 hp, 3-ph., 2-speed, 230V only * Net Weight: 1,544 lbs. * Quill Dia: 3-3/8" * Spindle Distance: To table, 14"; To column, 5-1/4" min., 15-3/4" max. * Spindle Speed(s): 10 (120-1,550 rpm) * Spindle Taper: R8 * Spindle Travel: 5" * T-Slot: (3) 5/8" x 7-7/8" x 35-3/4; 2-1/2 centers * Table Size: 7-7/8" x 35-3/4" * Table Travel: 25-1/4" max. longitudinal, 9-1/2" max. cross, 14" max. knee * Warranty: 2 years

$5,239.00

With R-8 Shank. Simple, extremely rigid construction. Hardened and ground shanks. Two vertical boring tool holes, one centered, one offset. One cross hole for greater versatility and capacity. Dependable adjustment. For spread .001" graduations for closer readings. Perfectly balanced for high speed…

Related Searches: Boring Head | R8 Boring | Boring Tool

Click to View all SKUs

Click to View Less SKUs

2009-0005 - * Diameter: 2" * Hole Size: 1/2" * Mount: 7/8-20	$69.00
2009-0010 - * Diameter: 3" * Hole Size: 3/4" * Mount: 1-1/2 - 18	$89.00
2009-0015 - * Diameter: 4" * Hole Size: 1" * Mount: -	$159.00

Features: ISO 9001 certified manufacturer; unique JET design 3-1/8 inch bore spindle supported by two tapered and one ball bearing Chrome molydenum headstock gears are hardened, ground and shaved Chrome control levers, dials and knobs Universal gearbox allows inch, metric, diametrical and module pitch…

Related Searches: Jet Lathe | 9 X 20 Lathe

Click to View all SKUs

Click to View Less SKUs

2005-0005 - * Bed: 13-3/8" * Compound Travel: 5-1/8" * Cross Feeds: 0.0006"-0.0365" * Cross Slide Travel: 9" * Dimensions: 97-1/2" L x 40" W x 46-7/8" H * Distance Bet. Centers: 40" * Follow Rest: 1/2" - 3-1/2" * Gap Length: 12-1/4" * Longitudinal Feed: 0.0015"-0.0913" * Motor: 7-1/2 hp; 3-phase; 230/460V prewired 230V * Net Weight: 5,187 lbs. * Spindle Hole: 3-1/8" * Spindle Speed(s): 12 (42-1,800 rpm) * Spindle Taper: MT7 (MT5 w/sleeve) * Spindle Travel: 5" * Steady Rest: 3/8"-7 * Swing Over Bed: 14" * Swing Over Cross Slide: 7-5/8" * Swing Through Gap: 12-1/2" * Tailstock: 4MT * Thread: Inch: 61 (1-5/8 - 72); Metric: 24 (0.05-20 mm)	$13,299.00
2005-0020 - * Bed: 13-3/8" * Compound Travel: 5-1/8" * Cross Feeds: 0.0006"-0.0365" * Cross Slide Travel: 9" * Distance Bet. Centers: 60" * Follow Rest: 1/2" - 3-1/2" * Gap Length: 12-1/4" * Longitudinal Feed: 0.0015"-0.0913" * Motor: 7-1/2 hp; 3 ph.; 230/460V prewired 230V * Net Weight: 5,795 lbs. * OAL: 116-1/2" L x 40" W x 48" H * Spindle Hole: 3-1/8" * Spindle Speed(s): 12 (25-1,800 rpm) * Spindle Taper: MT7 (MT5 w/sleeve) * Spindle Travel: 5" * Steady Rest: 3/8"-7" * Swing Over Bed: 16" * Swing Over Cross Slide: 10" * Swing Through Gap: 12-1/4" * Tailstock: 4MT * Thread: Inch: 61 (1-5/8 - 72); Metric: 24 (0.05-20 mm)	$16,005.00
2005-0025 - * Bed: 13-3/8" * Compound Travel: 5-1/8" * Cross Feeds: 0.0006"-0.0365" * Cross Slide Travel: 9" * Dimensions: 116-1/2" L x 40" W x 48-7/8" H * Distance Bet. Centers: 60" * Follow Rest: 1/2" - 3-1/2" * Gap Length: 12-1/4" * Longitudinal Feed: 0.0015"-0.0913" * Motor: 7-1/2HP; 3 ph., 230/460V prewired 230V * Net Weight: 6,245 lbs. * Spindle Hole: 3-1/8" * Spindle Speed(s): 12 (25-1,800 rpm) * Spindle Taper: MT7 (MT5 w/sleeve) * Spindle Travel: 5" * Steady Rest: 3/8"-7" * Swing Over Bed: 18" * Swing Over Cross Slide: 11" * Swing Through Gap: 12-1/4" * Tailstock: 5MT * Thread: Inch, 61 (1-5/8 - 72); Metric, 24 (0.05-20mm)	$17,750.00

…x 13-3/4" W Spindle Speed(s): 6 (88-1,500 rpm) Stroke: 7-7/8" Capacity: Drilling, 1-1/2" steel, 2" cast iron; tapping, 3/4" steel, 1" cast iron; boring, 3" steel, 4-1/8" cast iron Dimensions: 63" L x 36" W x 76" H Headstock: 27-1/2" horiz. Morse Taper: 4MT Net Weight: 2,640 lbs. Motor: Spindle drive…

Heat treated and precision ground. Two lockdowns at 90 degrees for secure fastening. TIR maximum .002 inch.

Related Searches: Thread Mill | Boring Bar Holder | Micro 100 | Boring Bar

Click to View all SKUs

Click to View Less SKUs

1032-1535 - * Diameter: 1/2" OD; 1/8" ID	$25.60
1032-1540 - * Diameter: 3/16" ID; 1/2" OD	$25.60
1032-1545 - * Diameter: 1/4" ID; 1/2" OD	$25.60
1032-1550 - * Diameter: 5/16" ID; 1/2" OD	$25.60
1032-1555 - * Diameter: 3/8" ID; 1/2" OD	$25.60
1032-1560 - * Diameter: 1/8" ID; 5/8" OD	$25.60
1032-1565 - * Diameter: 3/16" ID; 5/8" OD	$25.60
1032-1570 - * Diameter: 1/4" ID; 5/8" OD	$25.60
1032-1575 - * Diameter: 5/16" ID; 5/8" OD	$25.60
1032-1580 - * Diameter: 3/8" ID; 5/8" OD	$25.60
1032-1585 - * Diameter: 1/8" ID; 3/4" OD	$31.81
1032-1590 - * Diameter: 3/16" ID; 3/4" OD	$31.81
1032-1595 - * Diameter: 1/4" ID; 3/4" OD	$31.81
1032-1600 - * Diameter: 5/16" ID; 3/4" OD	$31.81
1032-1605 - * Diameter: 3/8" ID; 3/4" OD	$31.81
1032-1610 - * Diameter: 1/2" ID; 3/4" OD	$31.81

Heat treated bars can be used for high speed or carbide-tipped boring tools (shown with tool bits - NOT INCLUDED).

Related Searches: Boring Tool | Boring Bar | Tool Bits | Carbide Tool Bits

Click to View all SKUs

Click to View Less SKUs

2207-0055 - * Bit Width: 5/32 round * OAL: 2.5" * Shank: 1/4 * Tool No.: BS-1	$3.75
2207-0060 - * Bit Width: 3/16 round * OAL: 2.5" * Shank: 5/16 * Tool No.: BS-1	$4.40
2207-0065 - * Bit Width: 3/16 round * OAL: 3" * Shank: 3/8 * Tool No.: BS-3	$5.10
2207-0070 - * Bit Width: 3/16 square * OAL: 3" * Shank: 1/2 * Tool No.: BS-4	$5.75
2207-0075 - * Bit Width: 3/16 square * OAL: 4.5" * Shank: 9/16 * Tool No.: BS-5	$6.50
2207-0080 - * Bit Width: 1/4 square * OAL: 5" * Shank: 5/8 * Tool No.: BS-6	$7.00
2207-0085 - * Bit Width: 1/4 square * OAL: 6" * Shank: 3/4 * Tool No.: BS-7	$9.00
2207-0090 - * Bit Width: 5/16 square * OAL: 6" * Shank: 1" * Tool No.: BS-9	$11.50
2207-0095 - * OAL: 8" * Shank: 1.25" * Size: 1/2" square * Tool No.: BS-11	$16.75
2207-0100 - * OAL: 9" * Shank: 1.5" * Size: 1/2 square * Tool No.: BS-15	$24.25