With R-8 Shank. Simple, extremely rigid construction. Hardened and ground shanks. Two vertical boring tool holes, one centered, one offset. One cross hole for greater versatility and capacity. Dependable adjustment. For spread .001" graduations for closer readings. Perfectly balanced for high speed…

Related Searches: R8 Boring | Boring Tool

Click to View all SKUs

Click to View Less SKUs

2009-0005 - * Diameter: 2" * Hole Size: 1/2" * Mount: 7/8-20	$69.00
2009-0010 - * Diameter: 3" * Hole Size: 3/4" * Mount: 1-1/2 - 18	$89.00
2009-0015 - * Diameter: 4" * Hole Size: 1" * Mount: -	$159.00

Standard 1/2-inch tooling capacity. Direct reading .001 micrometer dial. Hardened steel and entirely manufactured in the U.S. Boring capacity of up to 4 inches net of 1/2 cross hole capacity.

Click to View all SKUs

Click to View Less SKUs

2008-0005 - * Capacity: 1/2" tooling, 4" boring * Diameter: 2-1/2" body * Shank: 3/4"	$119.00
2008-0007 - * Capacity: 1/2" tooling, 4" boring * Diameter: 2-1/2" body * Shank: R8	$169.00

Direct reading, .001 micrometer diameter. Precision hardened steel.

Related Searches: Boring Head Shank

Click to View all SKUs

Click to View Less SKUs

2008-0030 - * Head Size: 2-1/2" * Hole Size: 5/8" * OAL: 3-3/16" * Offset: 3/4" * Thread: 7/8-20 * Tool No.: BHTC * Vert. Hole Spacing: 3/4"	$108.00
2008-0035 - * Head Size: 3" * Hole Size: 3/4" * OAL: 3-1/2" * Offset: 1-1/4" * Thread: 1-1/2" - 18 * Tool No.: BHTD * Vert. Hole Spacing: 5/16"	$125.00

For use with APT boring heads with shank type interchangeability.

Related Searches: Mt2 | Boring Head Shank

Click to View all SKUs

Click to View Less SKUs

2008-0040 - * Thread: 7/8-20 * Tool No.: BHQM2 * Type: MT2 with tang	$23.00
2008-0045 - * Thread: 7/8-20 * Tool No.: BHQM3 * Type: MT3 with tang	$26.00
2008-0050 - * Thread: 7/8-20 * Tool No.: BHQM4 * Type: MT4 with tang	$31.00
2008-0055 - * Thread: 7/8-20 * Tool No.: BHQS3 * Type: 30 NT with draw bar & drive flange	$77.35
2008-0060 - * Thread: 7/8-20 * Tool No.: BHQS4 * Type: 40 NT with draw bar and drive flange	$95.90
2008-0065 - * Thread: 7/8-20 * Tool No.: BHQ16 * Type: 1/2" dia. straight shank	$19.25
2008-0070 - * Thread: 7/8-20 * Tool No.: BHQ24 * Type: 3/4" dia. straight shank	$13.40
2008-0075 - * Thread: 7/8-20 * Tool No.: BHQ32 * Type: 1" dia. straight	$13.40
2008-0080 - * Thread: 7/8-20 * Tool No.: BHQR8 * Type: R-8 shank	$26.00
2008-0085 - * Thread: 1-1/2" - 18 * Tool No.: BHXM3 * Type: MT3 with tang	$47.05
2008-0090 - * Thread: 1-1/2" - 18 * Tool No.: BHXM4 * Type: MT4 with tang	$37.00
2008-0095 - * Thread: 1-1/2" - 18 * Tool No.: BHXS3 * Type: 30 NT with draw bar & drive flange	$60.00
2008-0100 - * Thread: 1-1/2" - 18 * Tool No.: BHXS4 * Type: 40 NT with draw bar and drive flange	$113.80
2008-0105 - * Thread: 1-1/2" - 18 * Tool No.: BHX32 * Type: 1" dia. straight shank	$19.00
2008-0110 - * Thread: 1-1/2" - 18 * Tool No.: BHX40 * Type: 1-1/4" dia. with straight shank	$38.90
2008-0115 - * Thread: 1-1/2" - 18 * Tool No.: BHX48 * Type: 1-1/2" dia. straight shank	$38.90
2008-0120 - * Thread: 1-1/2" - 18 * Tool No.: BHXR8 * Type: R-8 shank	$33.00

…will meet many of your boring needs. It features an all steel boring head and nine boring bars. The boring head is made in the USA and features standard 1/2-inch tooling capacity, direct read .001 micrometer dial and hardened steel construction. Body size is 2-1/2 inches. Boring bar set is imported. Bars…

Related Searches: R8 | Boring Bar | Boring Bar Set

Click to View all SKUs

Click to View Less SKUs

2008-0010 - * Max Bore: 4" net 1/2 cross-hole * Shank: 3/4"	$135.00
2008-0015 - * Max Bore: 4" net of 1/2 cross-hole * Shank: R8	$184.00

The finest materials and craftmanship are employed to combine strength, flexibility and accuracy in a tool of unique design. Hardened and ground shanks.

Related Searches: Boring Bar | Boring Bar Set | R8

Click to View all SKUs

Click to View Less SKUs

1095-9923 - * Shank: Head, R8; bars, 1/2" * Size: 9-pc. carbide tipped set w/2" head	$79.00
1095-9963 - * Shank: Head, R8; bars, 3/4" * Size: 12-pc. carbide tipped set w/3" head	$99.00
1095-9985 - * Shank: Head, R8; bars, 1" * Size: 6-pc. carbide tipped set w/4" head	$199.00
1096-9943 - * Shank: Head, R8; bars, 1/2" * Size: 10-pc. cobalt set w/2" head	$119.00
1096-9983 - * Shank: Head, R8; bars, 3/4" * Size: 14-pc. cobalt set w/3" head	$189.00

Shanks and adapters have 1-1/2" - 8 thread. They fit the following Criterion boring heads: S-3, DBL-203, DBL-204, SL-203, SL-204 and 3F-HB.

Related Searches: Boring Head Shank | Morse Taper

Click to View all SKUs

Click to View Less SKUs

2211-0125 - * Size: 3MT tang type	$88.80
2211-0130 - * Size: 4MT tang type	$97.25
2211-0135 - * Size: 5MT tang type	$136.15
2211-0140 - * Size: 30 National Taper, 1/2-13 drawbar & drive flange	$149.00 $145.15
2211-0145 - * Size: 40 National Taper, 5/8-11 drawbar	$141.30 $137.45
2211-0150 - * Size: 40 National Taper, 5/8-11 drawbar & drive flange	$195.00 $189.60
2211-0155 - * Size: 50 National Taper, 1" - 8 drawbar	$195.00 $189.60
2211-0160 - * Size: 50 National Taper, 1" - 8 drawbar & drive flange	$305.50 $297.15
2211-0165 - * Size: Bridgeport R8	$84.95
2211-0170 - * Size: 1" dia. straight shank	$48.50
2211-0175 - * Size: 1-1/4" dia. straight shank	$68.75
2211-0180 - * Size: 1-1/2" dia. straight shank	$68.75
2211-0185 - * Size: 1-3/4" dia. straight shank	$34.40
2211-0190 - * Size: 2" dia. straight shank	$48.50
2211-0200 - * Size: No. 9 Brown & Sharpe, 1/2-13 drawbar	$82.60

The DBL-203 is a sturdy unit of extended boring range that is capable of peeling off heavy roughing cuts. It is also a tool of extreme sensitivity. The use of a wide base bar holder that rests securely on the body eliminates the need for a separate side plate. This has become an integral part of the…

…those difficult facing, grooving, back facing and counterboring operations on workpieces too large to turn or too bulky to handle with safety. The head incorporates a reversing feature. It can be used in either the forward mode (moving from the inside to the outside) or in the reversing mode (from the…

Here is a small head that will be in constant demand in any shop. Its wide base bearing surface assures maximum rigidity, even when the bar holder is in an offset position. This wide base design is a Criterion innovation that increases bearing surfaces by 50 percent over older models. A choice of either…

Related Searches: Criterion

Click to View all SKUs

Click to View Less SKUs

2211-0005 - * Offset: 5/8" * Size: 2" dia. x 2-13/32" OAL; 1/2" hole * Tool No.: DBL-202B	$289.25
2211-0010 - * Diameter: 2" dia. x 2-13/32" OAL; 3/8" hole * Offset: 5/8" * Tool No.: DBL-202A	$289.25