For various fabrication projects, such as boxes, covers or trays. Pictured C-clamps are not included. Brake: 18" x 1-1/2" Angle: 90° max. Capacity: 16 ga. sheet metal

Related Searches: Sheet Metal Brake | Metal Brake | Metal Bender

Turn your vise into a mini brake! Each unit comes with three adjustable fingers. Magnetic mounting.

Related Searches: Vise

Click to View all SKUs

Click to View Less SKUs

2800-0110 - * Angle: 25° male V-angle * Capacity: 14-gauge cold rolled steel; 90° * Die: 1/4" th. x 1-1/4" L to end of point * Includes: Two 1" W male dies, one 2" W male die * Max Bend: 90° * Type: 4"	$10.00
2800-0115 - * Angle: 25° male V-angle * Capacity: 14-gauge cold rolled steel * Die: 1/4" th. x 1-1/4" L to end of point * Includes: One 1" W male die, two 2" W male dies * Max Bend: 90° * Type: 5"	$12.95
2800-0120 - * Angle: 25° male V-angle * Capacity: 14-gauge cold rolled steel * Die: 1/4" th. x 1-1/4" L to end of point * Includes: One each 1", 2" & 3" wide male dies * Max Bend: 90° * Type: 6"	$14.95

Bend boxes, channels, angles and more. Shears a full width in mild steel or equivalent. Rollers are fully adjustable and are equipped with wire forming grooves.

Related Searches: Shear | 3 In 1 | Brake Shear

Click to View all SKUs

Click to View Less SKUs

2805-0015 - * Capacity: 20 ga. mild steel; 1-1/2" min. roll * Die: 6 male, 1", 2", 3", 6", 8", 10"; 1 female, 30" * Type: 30" shear	$419.00
2805-0035 - * Capacity: 20 ga. mild steel, 1-1/2" min. roll * Die: 6 male, 1", 2", 3", 6", 8",10"; 1 female, 32" * Type: 40" shear	$599.00
2805-0110 - * Capacity: 20 ga. mild steel; 2" min. roll * Die: 9 male, 1", 1-1/2", 2", 2-1/2", 4", 7", 9", 10", 15"; 1 female, 52" * Type: 52" shear	$1,199.00

Incorporates all the features of JET's standard hand brakes but with a greater range of applications. With fingers installed, it can be used as a full-length nose bar, turning the machine into a straight bending brake. Sectioned fingers are easily removed for box bending and special forming operations…

Related Searches: Box Pan Brake

Makes rolls, cones and wire loops. Cut and form up to 20-gauge mild steel to the full width of the bed. Includes back gage assembly with adjusting nuts. Net Weight: 115 lbs. Die: One each 1", 3", 4"; two 2" Groove: 1/8", 3/16", 1/4" Roller: 1-1/2" dia. Capacity: 20 ga. mild steel

Related Searches: Slip Roll | Shear | Brake Shear | Press Brake

Steel construction. Use to form boxes, trays, covers, etc. Radius: 1/4" min. Capacity: 3/4" W x 11/16" th.; 2" W x 7/16" th.; 4" x 5/16" th. Dimensions: 17-3/8" x 10-1/8" x 5-1/2"

Related Searches: Bender

…plate for four-jaw, face plate, steady and follow rests, halogen lamp, four-way turret tool post, bed stop, V-way; coolant pump, splash guard, foot brake and thread dial. Note: Use of static phase converter will void warranty. Spindle Speed(s): 15 (22-1,800 rpm) Cross Feeds: 0.0013"-0.035" Cross Slide…

Related Searches: Lathe

…etc. Ideal for shops, schools, hobbyists, service trucks and body shops. Handle: Two 12" Angle: To over 90° Capacity: 16-ga. aluminum; 18-ga. steel Brake: 30"

Related Searches: Bender

…the applications appropriate for brake tooling. Available in different lengths (varies by machine), brake tooling includes a standard "punch" and a four-way die that allows for 1/16-, 1/8-, 3/16- and 1/4-inch material to be broken to a 90-degree angle. The bottom brake die is held with brackets that easily…

Related Searches: Ironworker | Bender

Click to View all SKUs

Click to View Less SKUs

2796-0040 - * Capacity: 1/4" * Fits: 25-ton machines * Size: 7" wide	$715.00
2796-0041 - * Capacity: 1/4" * Fits: 55-ton machines * Size: 10" wide	$895.00

Tennsmith's heavy-duty hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability. With much more substantial steel side plates than other domestically made units, these brakes have the rigidity required…

Related Searches: Tennsmith