Simple to use. Set consists of a guide base, two punches and magnified lenses -- one has a dot with circles, and the other a cross hair for easy location. Punches are hardened and precision ground and can be used on either hard or soft metals.

Related Searches: Optical Punch | Optical Center Punch

Centers top of holes. Perfect hole center alignment assured. Precision ground and spring loaded, with all parts of hardened steel. Replaces different size transfer punches.

Related Searches: Transfer Punch

Click to View all SKUs

Click to View Less SKUs

6516-0010 - * OAL: 3-1/8" * Size: 3/16" dia. * Type: 1/4"-3/4" holes	$6.50
6516-0012 - * OAL: 4-1/8" * Size: 3/16" dia. * Type: 1/4" - 1-1/16" holes	$9.75

…operators can now punch layout points to within .002 inch using this high power piloted center punch system. Center dot and circle target the punch, and magnification is without distortion or parallax. The optical center punch is located over a scribed workpiece and adjusted until centered, using the optics…

Related Searches: Optical Center Punch | Optical Punch

…for ease of handling. A special tempering process makes the head less likely to fracture from a hard, off-center blow. Rugged automatic punches have all-steel handles and parts. These punches have a mechanism that automatically strikes a blow when downward pressure is applied. No hammer is required…

Related Searches: Starrett Punch | Starrett Center Punch | Punch

Click to View all SKUs

Click to View Less SKUs

6525-0100 - * OAL: 7/16" * Size: 4"	$29.50
6525-0105 - * OAL: 5" * Size: 9/16"	$33.00
6525-0110 - * OAL: 5-1/4" * Size: 11/16"	$37.50

The punch grinder can be put on a surface grinding machine for making round punches. They can be ground by putting them among three rollers of the punch grinder, without checking the center. Capacity: 1/8" - 1-3/16" Accuracy: .0002" roller accuracy right/left

Related Searches: Punch

Center punches are made of tool steel, hardened on both ends. They have round shanks and knurled grips. Starrett's special tempering process prevents the head from fracturing; adds greatly to punch life; and avoids accidents from flying splinters. Tips are accurately center. Includes plastic case. OAL…

Related Searches: Starrett Punch

Entirely automatic single hand operation. Adjustable from very light to extra heavy markings. Used for marking, punching, staking, riveting, etc. Replacement points and moving parts are made of hardened alloy steel.

…These tap & drills can be used on a multi-spindle or with hand-held drill operations. The 118-degree helical point eliminates the need for a center punch or center drilling. Inch and metric sizes available.

Related Searches: 15 32-32 Tap | 15 16-16 Tap | 1 3 16-16 Tap

Click to View all SKUs

Click to View Less SKUs

0335-0005 - * Drill Dia: .112 * Drill Length: 1/4 * GH Limit: GH-3 * OAL: 2" * Size: 6-32NC * Thread Lgth.: 13/32 * Type: Inch	$8.44
0335-0010 - * Drill Dia: .138 * Drill Length: 9/32 * GH Limit: GH-3 * OAL: 2-1/8 * Size: 8-32NC * Thread Lgth.: 15/32 * Type: Inch	$8.44
0335-0015 - * Drill Dia: .155 * Drill Length: 9/32 * GH Limit: GH-3 * OAL: 2-3/8 * Size: 10-24NC * Thread Lgth.: 9/16 * Type: Inch	$8.44
0335-0020 - * Drill Dia: .164 * Drill Length: 9/32 * GH Limit: GH-3 * OAL: 2-3/8 * Size: 10-32NF * Thread Lgth.: 1/2 * Type: Inch	$8.44
0335-0025 - * Drill Dia: .208 * Drill Length: 7/16 * GH Limit: GH-3 * OAL: 2-1/2 * Size: 1/4-20NC * Thread Lgth.: 23/32 * Type: Inch	$8.44
0335-0030 - * Drill Dia: .220 * Drill Length: 7/16 * GH Limit: GH-3 * OAL: 2-1/2 * Size: 1/4-28NF * Thread Lgth.: 21/32 * Type: Inch	$8.76
0335-0035 - * Drill Dia: .266 * Drill Length: 9/16 * GH Limit: GH-3 * OAL: 2-23/32 * Size: 5/16-18NC * Thread Lgth.: 27/32 * Type: Inch	$12.76
0335-0040 - * Drill Dia: .277 * Drill Length: 9/16 * GH Limit: GH-3 * OAL: 2-23/32 * Size: 5/16-24NF * Thread Lgth.: 13/16 * Type: Inch	$12.76
0335-0045 - * Drill Dia: .322 * Drill Length: 21/32 * GH Limit: GH-3 * OAL: 2-15/16 * Size: 3/8-16NC * Thread Lgth.: 1" * Type: Inch	$15.52
0335-0050 - * Drill Dia: .340 * Drill Length: 21/32 * GH Limit: GH-3 * OAL: 2-15/16 * Size: 3/8-24NF * Thread Lgth.: 15/16 * Type: Inch	$15.52
0335-0055 - * Drill Dia: .120 * Drill Length: 9/32 * GH Limit: GH-3 * OAL: 2" * Size: 3.5 x 0.6 * Thread Lgth.: 3/8 * Type: Metric	$4.00
0335-0060 - * Drill Dia: .134 * Drill Length: 11/32 * GH Limit: GH-3 * OAL: 2-1/8 * Size: 4 x 0.7 * Thread Lgth.: 15/32 * Type: Metric	$8.44
0335-0065 - * Drill Dia: .152 * Drill Length: 3/8 * GH Limit: GH-3 * OAL: 2-3/8 * Size: 4.5 x 0.75 * Thread Lgth.: 17/32 * Type: Metric	$4.00
0335-0070 - * Drill Dia: .203 * Drill Length: 7/16 * GH Limit: GH-3 * OAL: 2-1/2 * Size: 6 x 1 * Thread Lgth.: 9/16 * Type: Metric	$8.44
0335-0075 - * Drill Dia: .242 * Drill Length: 1/2 * GH Limit: GH-3 * OAL: 2-23/32 * Size: 7 x 1 * Thread Lgth.: 5/8 * Type: Metric	$4.80
0335-0080 - * Drill Dia: .377 * Drill Length: 1-1/16 * GH Limit: GH-3 * OAL: 4" * Size: 7/16-14NC * Thread Lgth.: 1-3/8 * Type: Inch	$20.12
0335-0085 - * Drill Dia: .396 * Drill Length: 1-1/16 * GH Limit: GH-3 * OAL: 4" * Size: 7/16-20NF * Thread Lgth.: 1-3/8 * Type: Inch	$20.12
0335-0090 - * Drill Dia: .435 * Drill Length: 1-3/16 * GH Limit: GH-3 * OAL: 4-1/2 * Size: 1/2-13NC * Thread Lgth.: 1-11/16 * Type: Inch	$23.40
0335-0095 - * Drill Dia: .458 * Drill Length: 1-3/16 * GH Limit: GH-3 * OAL: 4-1/2 * Size: 1/2-20NF * Thread Lgth.: 1-11/16 * Type: Inch	$23.40

General Tools' largest, most robust center punch is the professional's choice for marking and staking the toughest metals. The one-handed operation makes accurate marks without the need for a hammer and provides accurate center punches to prevent drill bits from traveling. In addition, the amount of…

Make indentations for starting drills in metal and other materials. Punches made of high grade tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn…

Click to View all SKUs

Click to View Less SKUs

6520-0065 - * OAL: 5" * Size: 3/16" point; 3/8" body * Type: 3/8" cut	$4.30
6520-0070 - * OAL: 6" * Point Size: 5/16" point; 1/2" body * Type: 1/2" cut	$5.55