Save up to 90 percent of setup time with this one-piece design -- no searching for the right step block and shim. The unique short design takes up little table space. The safe pivoting action compensates for workpiece variations and enables setups for many possible applications.

Related Searches: V Block

Click to View all SKUs

Click to View Less SKUs

1353-0005 - * H Max.: 1-7/16" * M Max.: 1-5/16" * M Min.: 15/16" * N Max.: 2" * N Min.: 1-1/4" * Size: 1-11/16" H x 3-1/4" L x 1-5/8" W * Stud: 1/2" dia.	$22.00
1353-0010 - * H Max.: 2-5/16" * M Max.: 1-5/8" * M Min.: 1-1/4" * N Max.: 2-3/8" * N Min.: 1" * Size: 2-3/8" H x 4" L x 2" W * Stud: 5/8" dia.	$25.00
1353-0015 - * H Max.: 3" * M Max.: 1-15/16" * M Min.: 1-1/2" * N Max.: 3" * N Min.: 1-7/16" * Size: 3" H x 5" L x 2-1/2" W * Stud: 3/4" dia.	$25.00

…a cadmium lubricated plunger Maximum slip fit between plunger and base's long bearing hole is 0.003 inch Use as a pin-locating gage as well as a clamping device

Related Searches: Toggle Clamp

Click to View all SKUs

Click to View Less SKUs

1516-0005 - * Bolt Hole Dia: 11/64" * Bolt Spacing: 5/8" x 5/8" * Handle: 45° * Height: 1-1/4" * Holding Pressure: 100 lbs. * Internal Thread: M4 x .7 * Mounting Plate: 1-5/16" x 1-1/16" * OAL: 2-9/16" * Ram Dia: 1/4" * Stroke: 5/8"	$8.00
1516-0010 - * Bolt Hole Dia: 17/32" * Bolt Spacing: 1-3/8" x 1-5/8" * Handle: 45° * Height: 3-21/64" * Holding Pressure: 300 lbs. * Internal Thread: 5/16-18 * Mounting Plate: 2-3/16" * OAL: 5-15/32" * Ram Dia: 7/16" * Strokes: 1-1/4"	$12.75
1516-0015 - * Bolt Hole Dia: 1/4" * Bolt Spacing: 2" x 1-9/16" * Handle: 45° * Height: 1-3/4" * Holding Pressure: 350 lbs. * Internal Thread: M10 x 1.0 * Mounting Plate: 2-19/32" x 2-3/4" * OAL: 8-7/16" * Ram Dia: 25/64" * Strokes: 1/2"	$9.00
1516-0020 - * Bolt Hole Dia: 21/64" * Bolt Spacing: 2" * Handle: 45° * Height: 9-3/8" * Holding Pressure: 1,500 lbs. * Internal Thread: 1/2-13 * Mounting Plate: 2-13/16" * OAL: 5-5/16" * Ram Dia: 3/4 ram * Strokes: 2-3/8"	$19.50
1516-0025 - * Bolt Hole Dia: 21/64" * Bolt Spacing: 2" * Handle: 90° * Height: 9-3/8" * Holding Pressure: 1,500 lbs. * Internal Thread: 1/2-13 * Mounting Plate: 2-13/16" * OAL: 6-57/64" * Ram Dia: 3/4" * Strokes: 2-3/8"	$19.50
1516-0030 - * Bolt Hole Dia: 11/32" * Bolt Spacing: 2-7/16" x 2-9/32" * Handle: 45° * Height: 5-29/32" * Holding Pressure: 1,000 lbs. * Internal Thread: 12 x 1.75 * Mounting Plate: 3-5/8" x 3-1/16" * OAL: 9-19/32" * Ram Dia: 5/8" * Strokes: 2"	$13.50
1516-0035 - * Bolt Hole Dia: 11/32" * Bolt Spacing: 1-5/8" * Handle: 45° * Height: 2-27/32" * Holding Pressure: 2,600 lbs. * Internal Thread: 3/8-16 * Mounting Plate: 5" x 2-7/32" * OAL: 7-1/32" * Ram Dia: 5/8" * Strokes: 2"	$19.50
1516-0090 - * Bolt Hole Dia: 17/64" * Bolt Spacing: 1-3/8" x 1-5/8" * Handle: 45° * Height: 2-23/32" * Holding Pressure: 500 lbs. * Internal Thread: 5/16-18 * Mounting Plate: 2" x 2-1/4" * OAL: 4-15/16" * Ram Dia: 1/2" * Strokes: 1-3/16"	$10.00
1516-0091 - * Bolt Hole Dia: 17/64" * Bolt Spacing: 1-3/8" x 1-5/8" * Handle: 90° * Height: 3-17/32" * Holding Pressure: 500 lbs. * Internal Thread: 5/16-18 * Mounting Plate: 2" x 2-1/4" * OAL: 4-15/16" * Ram Dia: 1/2" * Strokes: 1-3/16"	$13.25
1516-0092 - * Bolt Hole Dia: 9/32" * Bolt Spacing: 1-3/8" x 1-5/8" * Handle: 45° * Height: 3-23/32" * Holding Pressure: 850 lbs. * Internal Thread: 3/8-16 * Mounting Plate: 2-1/4" x 2-1/4" * OAL: 6-1/4" * Ram Dia: 5/8" * Strokes: 1-5/8"	$15.50
1516-0093 - * Bolt Hole Dia: 9/32" * Bolt Spacing: 1-3/8" x 1-5/8" * Handle: 90° * Height: 4-13/16" * Holding Pressure: 850 lbs. * Internal Thread: 3/8-16 * Mounting Plate: 2-1/4" x 2-1/4" * OAL: 6-1/4" * Ram Dia: 5/8" * Strokes: 1-5/8"	$15.50

Forged sliding arm design reduces clamping setup time Hex nut design makes replacing pads and spindles easy Copper plated spindles and Perma-Pads® resist welding spatter Exclusive, ergonomic Wilton-Grip® provides comfort, speed and visibility (included on many sizes)

Related Searches: Wilton

Click to View all SKUs

Click to View Less SKUs

3016-0320 - * Opening: 6" * Pressure: 1,000 lbs. * Rail: 5/8 x 5/16 * Spindle Dia: 9/16 * Throat Depth: 3"	$12.00
3016-0340 - * Opening: 16" * Pressure: 1,600 lbs. * Rail: 1" x 15/32 * Spindle Dia: 3/4 * Throat Depth: 4-3/4	$37.95
3016-0345 - * Opening: 20" * Pressure: 1,600 lbs. * Rail: 1" x 15/32 * Spindle Dia: 3/4 * Throat Depth: 4-3/4	$27.00
3016-0350 - * Opening: 24" * Pressure: 1,600 lbs. * Rail: 1" x 15/32 * Spindle Dia: 3/4 * Throat Depth: 4-3/4	$35.00
3016-0360 - * Opening: 40" * Pressure: 2,000 lbs. * Rail: 1-11/16 x 1/2 * Spindle Dia: 3/4 * Throat Depth: 4-3/4	$32.00
3016-0365 - * Opening: 48" * Pressure: 2000 lbs. * Rail: 1-11/16 x 1/2 * Spindle Dia: 3/4 * Throat Depth: 4-3/4	$39.00
3016-0370 - * Opening: 10" * Pressure: 2600 lbs. * Rail: 1-3/16 x 9/16 * Spindle Dia: 3/4 * Throat Depth: 4-3/4	$45.00
3016-0375 - * Opening: 12" * Pressure: 2600 lbs. * Rail: 1-3/16 x 9/16 * Spindle Dia: 3/4 * Throat Depth: 5-1/2	$60.00
3016-0380 - * Opening: 20" * Pressure: 2600 lbs. * Rail: 1-3/16 x 9/16 * Spindle Dia: 3/4 * Throat Depth: 5-1/2	$76.99
3016-0385 - * Opening: 32" * Pressure: 2600 lbs. * Rail: 1-3/16 x 9/16 * Spindle Dia: 3/4 * Throat Depth: 4-3/4	$49.00
3016-0395 - * Opening: 48" * Pressure: 2600 lbs. * Rail: 1-3/16 x 9/16 * Spindle Dia: 3/4 * Throat Depth: 4-3/4	$99.00
3016-0405 - * Opening: 12" * Pressure: 4800 lbs. * Rail: 1-9/16 x3-3/4 * Spindle Dia: 7/8 * Throat Depth: 7"	$89.00
3016-0415 - * Opening: 20" * Pressure: 4800 lbs. * Rail: 1-9/16 x3-3/4 * Spindle Dia: 7/8 * Throat Depth: 7"	$117.00
3016-0420 - * Opening: 24" * Pressure: 4800 lbs. * Rail: 1-9/16 x3-3/4 * Spindle Dia: 7/8 * Throat Depth: 7"	$79.00
3016-0425 - * Opening: 32" * Pressure: 4800 lbs. * Rail: 1-9/16 x3-3/4 * Spindle Dia: 7/8 * Throat Depth: 7"	$99.00
3016-0430 - * Opening: 40" * Pressure: 4800 lbs. * Rail: 1-9/16 x3-3/4 * Spindle Dia: 7/8 * Throat Depth: 7"	$99.00
3016-0435 - * Opening: 48" * Pressure: 4800 lbs. * Rail: 1-9/16 x3-3/4 * Spindle Dia: 7/8 * Throat Depth: 7"	$105.00

Does the work of 1-, 2- and 3-inch C-clamps up to nine times faster.

Click to View all SKUs

Click to View Less SKUs

3108-0115 - * Capacity: 4" * Pressure: 660 lbs. * Throat Depth: 5-1/2"	$14.65
3108-0120 - * Capacity: 8" * Pressure: 660 lbs. * Throat Depth: 5-1/2"	$18.35

Unique Bessey clamp pad tilts to 35 degrees; tempered thrust bolt can be unscrewed for easy maintenance or replacement Rail, fixed jaws and pressure plate are heat formed In one piece from cold drawn profiled steel, which is optimized for high static stress loads, tempered and electro-galvanized Heat…

Click to View all SKUs

Click to View Less SKUs

3108-0010 - * Capacity: 8" * Pressure: 660 lbs. * Rail: 3/4" x 3/8" * Spindle Dia: 3/4" * Throat Depth: 4" * Type: Light duty	$48.11
3108-0015 - * Capacity: 12" * Pressure: 1,200 * Rail: 1" x 15/32" * Spindle Dia: 5/8" * Throat Depth: 5-1/2" * Type: Light duty	$50.20
3108-0030 - * Capacity: 24" * Pressure: 1,660 lbs. * Rail: 1" x 15/32" * Spindle Dia: 5/8" * Throat Depth: 4-3/4" * Type: Light duty	$54.39
3108-0050 - * Capacity: 8" * Pressure: 1,800 lbs. * Rail: 1-1/16" x 1/2" * Spindle Dia: 5/8" * Throat Depth: 4-3/4" * Type: Medium duty	$50.20
3108-0060 - * Capacity: 12" * Pressure: 1,800 lbs. * Rail: 1-1/16" x 1/2" * Spindle Dia: 5/8" * Throat Depth: 4-3/4" * Type: Medium duty	$54.39
3108-0070 - * Capacity: 20" * Pressure: 1,800 lbs. * Rail: 1-1/16" x 1/2" * Spindle Dia: 3/4" * Throat Depth: 4-3/4" * Type: Medium duty	$61.71
3108-0075 - * Capacity: 24" * Pressure: 1,800 lbs. * Rail: 1-1/16" x 1/2" * Spindle Dia: 3/4" * Throat Depth: 4-3/4" * Type: Medium duty	$70.08
3108-0080 - * Capacity: 6" * Pressure: 1,330 lbs. * Rail: 22/32" x 13/32" * Spindle Dia: 3/4" * Throat Depth: 4-3/4" * Type: Regular duty	$26.35
3108-0085 - * Capacity: 8" * Pressure: 2,660 lbs. * Rail: 1-3/16" x 9/16" * Spindle Dia: 3/4" * Throat Depth: 4-3/4" * Type: Regular duty	$51.25
3108-0095 - * Capacity: 12" * Pressure: 2,660 lbs. * Rail: 1-3/16" x 9/16" * Spindle Dia: 3/4" * Throat Depth: 4-3/4" * Type: Regular duty	$72.17
3108-0100 - * Capacity: 20" * Pressure: 2,660 lbs. * Rail: 1-3/16" x 9/16" * Spindle Dia: 3/4" * Throat Depth: 4-3/4" * Type: Regular duty	$92.04

Drop forged series recommended for work not requiring unusual throat depth. Spindles are through-hardened steel and threaded with a special precision-cut single lead. Acme thread. Perma-Pads® are standard and are also black oxide coated.

Related Searches: C Clamps

Click to View all SKUs

Click to View Less SKUs

3016-0785 - * Capacity: 0-2" * Proof Test lbs: 2,700 * Spindle Dia: 9/16" * Throat Depth: 1-13/16"	$17.50
3016-0790 - * Capacity: 0-3" * Proof Test lbs: 3,000 * Spindle Dia: 9/16" * Throat Depth: 1-15/16"	$20.80
3016-0795 - * Capacity: 0-4" * Proof Test lbs: 3,700 * Spindle Dia: 5/8" * Throat Depth: 2-5/16"	$23.50
3016-0800 - * Capacity: 0-6" * Proof Test lbs: 4,500 * Spindle Dia: 5/8" * Throat Depth: 2-15/16"	$29.25
3016-0805 - * Capacity: 0-8" * Proof Test lbs: 5,200 * Spindle Dia: 3/4" * Throat Depth: 3-7/16"	$42.35
3016-0810 - * Capacity: 1-1/2" - 10" * Proof Test lbs: 6,000 * Spindle Dia: 3/4" * Throat Depth: 3-3/4"	$63.35
3016-0815 - * Capacity: 1-1/8" - 12" * Proof Test lbs: 8,000 * Spindle Dia: 3/4" * Throat Depth: 3-7/8"	$72.30

…-Bite T-slot clamp combines a unique cam action clamping element with a T-nut. Makes fast setups possible right on the machine and locks into machine T-slot for low profile. Brass hex follows contour of unusual shaped parts. Approximately one-half turn tightens or loosens clamp. All clamps available in…

Related Searches: T Nuts | Clamp Set

Click to View all SKUs

Click to View Less SKUs

1351-0420 - * Distance Of Movement: .40 * Key: 1/8" * Max Holding Force: 800 lbs * Screw Size & Pitch: 1/4-20 * Size: 5/8" x 3/16" hex * T-Slot Size: 3/8" * Thread Lgth.: 1/2"	$21.95
1351-0421 - * Distance Of Movement: .040 * Key: 3/16" * Max Holding Force: 750 lbs. * Screw Size & Pitch: 5/16-18 * Size: 13/16" x 3/16" hex * T-Slot Size: 7/16" * Thread Lgth.: 1/2"	$21.95
1351-0422 - * Distance Of Movement: .050 * Key: 3/16" * Max Holding Force: 2,000 lbs. * Screw Size & Pitch: 3/8-16 * Size: 13/16" x 1/4" hex * T-Slot Size: 1/2" * Thread Lgth.: 3/4"	$21.95
1351-0423 - * Distance Of Movement: .050 * Key: 3/16" * Max Holding Force: 2,000 lbs. * Screw Size & Pitch: 3/8-16 * Size: 13/16" x 1/4" hex * T-Slot Size: 9/16" * Thread Lgth.: 3/4"	$21.95
1351-0424 - * Distance Of Movement: .100 * Key: 5/16" * Max Holding Force: 4,000 lbs. * Screw Size & Pitch: 1/2-13 * Size: 1" x 3/8" hex * T-Slot Size: 5/8" * Thread Lgth.: 1"	$21.95
1351-0426 - * Distance Of Movement: .100 * Key: 5/16" * Max Holding Force: 4,000 lbs * Screw Size & Pitch: 1/2-13 * Size: 1" X 3/8" hex * T-Slot Size: 11/16" * Thread Lgth.: 1"	$21.95

…each of 3-, 4-, 5-, 6-, 7- and 8-inch lengths Six T-slot nuts Four coupling nuts Six flange nuts Six pairs steel step blocks Three pairs steel step clamps

Related Searches: Clamping Kit | Bridgeport Clamping Set | T Slot Nuts | Clamp Set

Click to View all SKUs

Click to View Less SKUs

1350-0003 - * Size: 5/8" table slot; 1/2-13 stud	$47.95
1350-0007 - * Size: 7/16" table slot; 3/8-16 stud	$47.95
1350-0010 - * Size: 1/2" table slot; 3/8-16 stud	$47.95

Highly plated, rust resistant finish. Insulated. With vinyl covered tips and grips. Won't mar materials or slip out of your hand.

Click to View all SKUs

Click to View Less SKUs

1525-0020 - * OAL: 9"	$4.25
1525-0025 - * OAL: 4"	$1.25
1525-0030 - * OAL: 6"	$2.15
1525-9985 - * OAL: 4", 6", 9" set	$6.25

A low profile cam action clamp with positive down force. This clamp is mounted in the T-slots of machine tables by sliding the clamp to the workpiece and tightening the locking screw. Total distance of movement is .100. Two clamping edges are smooth for machined surfaces and serrated for rough cut material…

Related Searches: Edge Clamp | Mite Bites Clamps

Click to View all SKUs

Click to View Less SKUs

1351-0005 - * A: 1.94 * B: 1.12 * C: .62 * D: 1.00 * E: .38 * Size: For 9/16" T-slots	$40.20
1351-0010 - * A: 1.94 * B: 1.12 * C: .62 * D: 1.00 * E: .38 * Size: For 5/8" T-slots	$40.20
1351-0015 - * A: 1.94 * B: 1.12 * C: .62 * D: 1.00 * E: .38 * Size: For 11/16" T-slots	$40.20
1351-0020 - * A: 1.94 * B: 1.12 * C: .62 * D: 1.00 * E: .38 * Size: For 3/4" T-slots	$42.55