Search Suggestions: Micrometer | Indicator | Micrometer Set | Vernier Calipers | Machinist Square | Mitutoyo | Caliper | Outside Micrometer Set | Micrometer Case | Dial Calipers
View: Grid | List
Satin chrome finish. Ratchet stop thimble for consistent, repetitive measurements. Includes fitted box.
$39.00 - $59.00
Ratchet stop and .157 diameter rods with lapped measuring end. Satin chrome finish throughout. Includes fitted carrying case. Zero point error of rod: ±(.00008" + .00004 x L/3*); L = maximum measurement length. *Truncated after decimal point.
$178.20 - $397.10
Satin chrome finish. Reads directly from counter. Digital readout displays white numbers on a black background.
item # 1240-2245
* Measure depth of holes, slots, shoulders and projections to .001 inch* Rods are inserted through a hole in the screw and brought to a positive seat by knurled nut* Both sleeve and thimble have no glare satin chrome finish* Quick read graduations* Precision ground screw with 1-inch movement* Lock nut…
item # 1240-0360
Knurled knob at handle end for size adjustment. Hole size obtained by measuring over the contact points with micrometer. Gaging surface is a full round with flat bottom, which permits use in the smallest of shallow holes, slots and grooves. Fully hardened surface. Tools are extra long for gaging deep…
item # 1314-9980
…hardened and ground carbide faces, anvil and spindle with with micro-lapped finish on ends. The 6-inch dial caliper features had inside, outside, depth and step measurement. Vernier readings in inches. Stainless steel hardened surface. Choose from black or white dial face. Includes fitted case.
Set consists of the following:* 6-inch chrome clad dial caliper, .100-inch revolution; makes inside, outside, depth and step measurements* 0- to 1-inch carbide-faced micrometer with .0001-inch graduations, positive locking clamp and ratchet thimble* 4-by-3-inch ground machinist's square* 6 x 1/2-inch…
…mm interchangeable rods, with lapped measuring ends, provide wide measurement range. Rod length can be adjusted in 25 mm or 1-inch increments. Micrometer also has ratchet stop for constant force, measuring rod clamp, SPC output and digit counter. Includes fitted plastic case.
item # 1259-1245
…micrometers and a 12-inch dial caliper; select from either black or white face. Dial caliper features:* Inside, outside, depth and step measurement* Vernier readings in inches* Stainless steel hardened surface* Adjustable non-glare dial* Satin chrome finish* Fitted case or pouch included Micrometers…
Measure groove depth in brake system discs. Hardened anvil has 60-degree point. Flat spindle with carbide face. Additional reach with the 3-1/2 inch deep throat. Includes standard, adjustment wrench and case.
item # 1251-0080
…caliper, with .001-inch and .02-millimeter scales and four-way measurement -- inside, outside, step and depth* 0- to 25-millimeter carbide faced micrometer with .01-millimeter graduations; also has positive locking clamp and ratchet thimble* 6 x 1/2-inch stainless, chrome clad 4R rule with scales of…
item # 1266-0215
Set consists of:* 6-inch dial caliper that measures inside, outside, depth and step; revolution, .100 inch; resolution, .001 inch; available with black or white face* Carbide faced micrometer measures 0- to 1inch and has .0001-inch graduations, positive locking clamp and ratchet thimble./li>* 6 x 1…
Showing item 1 - 12 of 15 items found
|Site Search by|