…dividing head and tailstock vertical and horizontal plane is .0008 Maximum cumulative spacing error is 1 minute, 30 seconds The swivel head can be locked at any angle from 10 degrees below horizontal to 90 degrees vertical; precision fitting to base assures smooth rotation. Dividing head can divide…

Related Searches: Dividers | Tailstock | Angle Plate

Click to View all SKUs

Click to View Less SKUs

1994-0005 - * Center Height: 3-15/16" * Concentricity: .0006" center; .0004" inside taper at spindle nose; .0012" at arbor (8") * Spindle Hole: .709 * Spindle Taper: B&S no. 7 * Swing: 7-1/8" * Type: Semi-universal	$295.00
1994-0010 - * Center Height: 5-3/64" * Concentricity: .0006" center; .0004" inside taper at spindle nose; .0012" at arbor (8") * Spindle Hole: .787 * Spindle Taper: B&S no. 9 * Swing: 10-3/32" * Type: Semi-universal	$399.00
1994-0015 - * Center Height: 5-15/64" * Concentricity: .0006" center; .0004" inside taper at spindle nose; .0012" at arbor (8") * Spindle Hole: .985 * Spindle Taper: B&S No. 10 * Swing: 10-15/32" * Type: Universal	$795.00

For use with Suburban Tool Master-Grind index fixture, Model MG-5CV-S1. Reversible, variable speed. Includes mounting bracket, motor pulley, drive belt and screws. Can be mounted on either side of the index fixture. Speed(s): Variable (60-300 rpm) Motor: 1/15 hp reversible

Twin-Dex is a combination 5C collet and V-block in one fixture Horizontal or vertical V-block mounting 72-position index plate for hard index every 5 degrees Two heavy duty 4-inch diameter tapered roller bearings in spindle Extra large V-block capacity; built-in sine bar for setting angles between…

Related Searches: Angle Block

…Spirit level in both square and protractor heads Direct reading double 180-degree protractor scale Tempered steel machine divided blade 4R models -- 8ths and 16ths 16R models -- quick-reading 32nds and 64ths; aircraft quick reading 50ths and 100ths Cast head types have black wrinkle finish

Related Searches: Combination Square | Square | Starrett

Click to View all SKUs

Click to View Less SKUs

1240-1280 - * Blade: Regular * Grad: 4R * Includes: Square, center & non-reversible protractor * Size: 12" * Type: Cast head, black wrinkle finish	$175.00
1240-1285 - * Blade: Satin chrome * Grad: 4R * Includes: Square, center & non-reversible protractor * Size: 12" * Type: Cast head, black wrinkle finish	$195.00
1240-1290 - * Blade: Regular * Grad: 16R * Includes: Square, center & non-reversible protractor * Size: 12" * Type: Cast head, black wrinkle finish	$190.00
1240-1295 - * Grad: 16R * Includes: Square, center & reversible protractor * Size: 12" * Type: Cast head, black wrinkle finish	$192.00
1240-1300 - * Grad: 4R * Includes: Square, center & reversible protractor * Size: 12" * Type: Cast head, black wrinkle finish	$198.00
1240-1305 - * Blade: Satin chrome * Grad: 16R * Includes: Square, center & reversible protractor * Size: 12" * Type: Forged & hardened square & center heads, black enamel finish	$244.00
1240-1310 - * Blade: Satin chrome * Grad: 4R * Includes: Square, center & reversible protractor * Size: 12" * Type: Forged & hardened square & center heads, black enamel finish	$256.00
1240-1890 - * Blade: Regular * Graduations: 4R * Includes: Square and center heads; non-reversible protractor head * Size: 300 mm * Type: Cast head, black wrinkle finish	$180.00

3-inch height is ideal for small machine setups Lightweight for easy handling 72-position index plate allows an index every 5 degrees Spindle runs in two sealed preloaded bearings Spindle can be secured by stop button for easy tightening of collets Hardened steel base plate is ground square and…

…fitted knurls One 4-inch machinist scriber One 4-inch spring divider One 4-inch spring inside caliper One 4-inch spring outside caliper One 1/2-inch straight lathe dog One 1/2-inch bent lathe dog One 1/16-inch center punch with square head One 6-inch steel rule with clip

Related Searches: Mini Lathe | Knurling Tool | Lathe Tool Holder | Cut Off Tool Holder

…fitted knurls One 4-inch machinist scriber One 4-inch spring divider One 4-inch spring inside caliper One 4-inch spring outside caliper One 1/2-inch straight lathe dog One 1/2-inch bent lathe dog One 1/16-inch center punch with square head One 6-inch steel rule with clip

Related Searches: Lathe Tools | Mini Lathe

With square head only. Reversible lock bolt, spirit level and tempered steel machine divided blade. Regular or satin chrome finish. Graduated in 8ths, 16ths, 32nds and 64ths. ISO certified.

Related Searches: Combination Square | Square

Click to View all SKUs

Click to View Less SKUs

1240-1260 - * Blade: Regular * Graduations: 4R * Size: 12"	$65.00
1240-1265 - * Blade: Satin chrome * Graduations: 4R * Size: 12"	$78.00
1240-1270 - * Blade: Regular * Graduations: 16R * Size: 12"	$88.00
1240-1275 - * Blade: Satin chrome * Graduations: 16R * Size: 12"	$95.00

Used to measure the distance between points that are too great to be reached with dividers. Die-cast with black wrinkle finish, with hardened and forged 3-inch steel points. Beam is not furnished with trammels. Heads accommodate a beam 3/8 inch thick and 3/4 inch wide. ISO certified.