LED lights -- and audible beep on Model 4200-B40 -- activate instantly when ball touches conductive metal. Locates work surfaces quickly and easily. Repeatability of ±.0002. Precision ground on all surfaces. Easy change 12-volt battery is included. No bulbs to change; LED lights last for years.

Click to View all SKUs

Click to View Less SKUs

1291-0116 - * Shank: 1/2" * Size: .200" stylus	$69.95
1291-0117 - * Shank: 3/4" * Size: .400" stylus	$69.95

High sensitivity probe. Diameters of shank is .750 inch, and probe is .400 inch. Includes two batteries.

Edge finder lights up instantly when stylus reaches the work edge. Diameter of .200 inch by 5/8 inch length. Exact reading off any electrically conductive clean, metal surface. Shank diameter 1/2 inch; length of 3-1/4 inches. Comes complete with 1.5-volt AAA alkaline battery and Sylvania #224 bulbs in…

Related Searches: Borite

Fast, accurate measurement of tool vertical height Use on any type of machine with any type of tool; input tool offset in seconds Accuracy of .0004 inch from work reference level Hardened and precision ground Very safe against overrun Solid state light system with 360-degree visibility Three long…

Related Searches: Height Gage

Use these finders to locate round or flat work easily within .0005 inch. They are fully hardened and precision ground. ISO certified. To use, just place in a standard 1/2-inch diameter collet or chuck. As the collet or chuck rotates and approaches the edge of the work, the head moves sideways about…

Related Searches: Center Finder

Click to View all SKUs

Click to View Less SKUs

1330-1270 - * Size: 1/2" x .500" * Type: Single end	$13.70
1330-1275 - * Size: .200 & .500" * Type: Double end	$17.80
1330-1280 - * Size: 5 & 10 mm * Type: Double end	$38.00
1330-2150 - * Size: 3/8" x .200" * Type: Single end	$12.90
1330-2155 - * Size: 3/8" x .200" * Type: Double end	$17.20

Four different attachments adapt the tool to countless applications and are readily interchangeable in the wiggler shank. The attachments are snapped into the chuck without removing the collet nut and are clamped by a ball swivel joint that permits adjustment to an angular position. Comes with four…

Related Searches: Center Finder | Centering Indicator

Click to View all SKUs

Click to View Less SKUs

1240-1860 - * Type: Center finder, case, & 4 attachments	$46.50
1240-2340 - * Type: Shank with point	$19.50
1240-2345 - * Type: Ball contact only	$5.00

Set consists of WT Import electronic edge sensor and USA-made electronic offset gage. Edge sensor has a high sensitivity probe. Shank diameter is .750 inch; problem is .400 inch. Includes two batteries. Offset gage: Fast, accurate measurement of tool vertical height Use on any type of machine with any…

Related Searches: Height Gage

To accurately find position of tool spindle in relation to work surface, layout lines, holes, slots, etc. Set consists of interchangeable attachments and special chuck and ball contact attachment (.250-inch diameter); disc contact attachment (.100" diameter); needle point attachment; and offset…

Related Searches: Center Finder

Quickly located working edges, shoulders, grooves, center points and scribe lines. A time saving positioning tool. Precision tolerance, with all parts hardened and ground.

Related Searches: Center Finder | Center

Click to View all SKUs

Click to View Less SKUs

1291-0040 - * Includes: .200 & .375 tip w/wiggler & center point * Size: 3/8" shank * Type: Double end	$6.00
1291-0045 - * Includes: .200 tip * Size: 1/2" shank * Type: Single end	$6.00
1291-0050 - * Includes: Centering point * Size: 3/8" shank * Type: Single end	$5.50
1291-0055 - * Includes: Centering point * Size: 1/2" shank * Type: Single end	$5.50
1291-9970 - * Includes: 4-piece set * Size: 3/8" & 1/2" shanks * Type: Double & single end	$19.95

With dial and digital readings; combination of a large dial indicator and error-proof digital counter make unique gage easy to read Double-digit counter (up/down) can be separately set to zero at any height Dial range of 0 to 100 in either direction Includes carbide scriber, double chrome beams and…

Related Searches: Height Gage

Click to View all SKUs

Click to View Less SKUs

1269-0040 - * Dial Range: 0-100 * Graduations: .001" * Range: 12"	$109.00
1269-0045 - * Dial Range: 0-100 * Graduations: .001" * Range: 18"	$159.00
1269-0050 - * Dial Range: 0-100 * Graduations: .001" * Range: 24"	$199.00