Remove broken screws, bolts, threaded parts and pipe. Drill a hole into the broken part, insert extractor and turn to the left (counterclockwise). Broken piece is extracted without damage to threads.

Related Searches: Screw Extractor

Click to View all SKUs

Click to View Less SKUs

0412-0050 - * Diameter at Large End: 5/32" * Drill Size: 5/64" * OAL: 2" * Size: Removes 3/16"-1/4" * Small Dia.: .054" * Type: Extractor #1	$1.54
0412-0055 - * Diameter at Large End: 3/16" * Drill Size: 7/64" * OAL: 2-3/8" * Size: Removes 1/4"-5/16" * Small Dia.: .080" * Type: Extractor #2	$1.70
0412-0060 - * Diameter at Large End: 1/4" * Drill Size: 5/32" * OAL: 2-11/16" * Size: Removes 5/16"-7/16" * Small Dia.: 1/8" * Type: Extractor #3	$1.90
0412-0065 - * Diameter at Large End: 1/4" * Drill Size: 1/4" * OAL: 2-7/8 * Size: Removes 7/16"-9/16" * Small Dia.: 3/16" * Type: Extractor #4	$2.10
0412-0070 - * Diameter at Large End: 7/16" * Drill Size: 17/64" * OAL: 3-3/8" * Pipe Size: 1/8"-1/4" * Size: Removes 9/16"-3/4" * Small Dia.: 1/4" * Type: Extractor #5	$2.80
0412-0075 - * Diameter at Large End: 19/32" * Drill Size: 13/32" * OAL: 3-3/4" * Pipe Size: 3/8" * Size: Removes 3/4"-1" * Small Dia.: 3/8" * Type: Extractor #6	$6.35
0412-0080 - * Diameter at Large End: 3/4" * Drill Size: 17/32" * OAL: 4-1/8" * Pipe Size: 1/2" * Size: Removes 1" - 1-3/8" * Small Dia.: 1/2" * Type: Extractor #7	$10.00
0412-0085 - * Diameter at Large End: 1" * Drill Size: 13/16" * OAL: 4-3/8" * Pipe Size: 3/4" * Size: Removes 1-3/8" - 1-3/4" * Small Dia.: 3/4" * Type: Extractor #8	$16.00
0412-0090 - * Diameter at Large End: 1-9/32" * Drill Size: 1-1/16" * OAL: 4-5/8" * Pipe Size: 1" * Size: Removes 1-3/4" - 2-1/8" * Small Dia.: 1" * Type: Extractor #9	$23.40

Extractors in plastic case. Extractor No.: 1-8

DRILL-OUT is a power extractor designed to remove broken bolts. It's a drill bit and an extractor, all in one! The DRILL-OUT's tip not only gives you complete control, it allows you to obtain a perfectly centered hole without the tip walking or wandering. Each tool is engineered with a Winslow self…

Click to View all SKUs

Click to View Less SKUs

0411-0005 - * Size: Removes 1/4" (6 mm)	$15.25
0411-0010 - * Size: Removes 5/16" (8 mm)	$15.25
0411-0015 - * Size: Removes 3/8" (10 mm)	$15.25
0411-0020 - * Size: Removes 1/2" (12 mm)	$15.25
0411-0030 - * Pieces: 4 * Size: Set removes 1/4"-1/2"	$59.65

The Sock-It-Out extractor is a revolutionary heavy-duty left and right hand screw extractor that eliminates drilling out stripped socket set screws. This tool performs even in cases where light-duty spiral flute extractors fail. Sock-It-Out's unique tapered hex design wedges deeply into the stripped…

Related Searches: Sock-it-out | Screw Extractor

Click to View all SKUs

Click to View Less SKUs

4013-0025 - * Size: Removes #6, #8, #10, 1/4"	$37.00
4013-0030 - * Size: Removes 1/4", 5/16", 3/8", 7/16", 1/2"	$46.00
4013-0035 - * Size: Removes 5/8", 3/4"	$34.00
4013-0040 - * Size: Removes 7/8", 1"	$37.00

When faced with a rounded-off, rusted tight or painted-over bolt, bolt extractors will break it free Reverse spiral flutes are designed to bite down to provide maximum gripping power High carbon steel ensures longer life and greater durability Universal lobular design fits all types of fasteners 3/8…

Click to View all SKUs

Click to View Less SKUs

0601-0100 - * Drive: 3/8" * Pieces: 9 * Size: 8, 11, 14, 16, 19 mm; 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" * Type: Fractional	$85.00
0601-0105 - * Drive: 3/8" * Pieces: 9 * Size: 8-19mm, 5/16", 7/16", 9/16", 5/8", 3/4" * Type: Metric	$85.00

For removing damaged screws. Designed to be used in a variable drill. Set for reverse X-OUT can also be used in a hex bit screw driver. X-OUT removes all screws with an indented fit, including Phillips, slotted, hex, TORX, Pozidriv, Frearson and most tamper-resistant screws. High quality tool steel…

…metric. Lifetime warranty against defects. Expand and diversify your collection of tap extractors with Walton's sets. They're packaged in sturdy plastic compartmented cases. Asterisk (*) means three-flute extractor style supplied for sizes shown. All others are four-flute.

Related Searches: 15 16-16 Tap | Tap 5 8-10 | Tap Extractor | Tap Remover

Click to View all SKUs

Click to View Less SKUs

0413-0535 - * Quantity: 6 * Size: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"	$73.50
0413-0540 - * Quantity: 6 * Size: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"	$82.45
0413-0545 - * Quantity: 6 * Size: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8"	$89.35
0413-0550 - * Quantity: 11 * Size: 1/8"*, 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 5/8", 3/4", 7/8", 1"	$185.65
0413-0555 - * Quantity: 13 * Size: #4*, #5*, #6*, #10, #12, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"	$173.20
0413-0560 - * Quantity: 15 * Size: #4*, #5*, #6*, #8, #10, #12, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1"	$229.40

Remove broken taps and save the threads! Walton tap extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. The extractor's hardened steel fingers fit into the flutes of a broken tap to back it out simply and safely. This effective method has…

Related Searches: Tap Extractor | Tap Remover

Click to View all SKUs

Click to View Less SKUs

0143-0215 - * Size: 7/8" (22 mm)	$26.50
0143-0225 - * Size: 1" (24, 25 mm)	$29.75
0413-0005 - * Size: #4 (3 mm)	$12.10
0413-0015 - * Size: #5 (1/8", 3.2 mm)	$12.10
0413-0030 - * Size: #6 (3.5 mm)	$12.10
0413-0045 - * Size: #8 (4 mm)	$12.10
0413-0060 - * Size: #10 (3/16", 5 mm)	$12.10
0413-0075 - * Size: #12 (5.5 mm)	$12.50
0413-0090 - * Size: 1/4" (6 mm)	$12.50
0413-0110 - * Size: 5/16" (7, 8 mm)	$13.05
0413-0130 - * Size: 3/8" (9, 10 mm)	$13.05
0413-0150 - * Size: 7/16" (11 mm)	$13.60
0413-0165 - * Size: 1/2" (12 mm)	$13.60
0413-0180 - * Size: 9/16" (14 mm)	$20.10
0413-0190 - * Size: 5/8" (16 mm)	$21.85
0413-0205 - * Size: 3/4" (18, 20 mm)	$26.80

For removing damaged screws. Designed to used in a variable speed drill. Set for reverse, X-OUT removers can also be used in a hex bit screw driver. X-OUT removes all screws with an indented fit, including Phillips, slotted, hex, TORX, Pozidriv, Frearson and most tamper resistant screws. High…

Click to View all SKUs

Click to View Less SKUs

0411-0070 - * Size: Removes #6-#8	$10.99
0411-0075 - * Size: Removes #8-#10	$10.99
0411-0080 - * Size: Removes #10-#12	$11.99

Extra fingers for use with Walton tap extractors. Not covered by Walton's limited lifetime warranty.

Related Searches: Tap Extractor

Click to View all SKUs

Click to View Less SKUs

0413-0290 - * Size: #6 (3.5 mm)	$0.75
0413-0305 - * Size: #8 (4 mm)	$0.75
0413-0320 - * Size: #10 (3/16", 5 mm)	$1.05
0413-0335 - * Size: #12 (5.5 mm)	$1.05
0413-0350 - * Size: 1/4" (6 mm)	$1.25
0413-0365 - * Size: 9/32" (7 mm)	$1.25
0413-0370 - * Size: 5/16" (7, 8 mm)	$1.25
0413-0385 - * Size: 11/32"	$1.40
0413-0390 - * Size: 3/8" (9, 10 mm)	$1.40
0413-0405 - * Size: 13/32" (10 mm)	$1.40
0413-0410 - * Size: 7/16" (11 mm)	$1.40
0413-0425 - * Size: 1/2" (12 mm)	$1.87
0413-0440 - * Size: 9/16" (14 mm)	$2.09
0413-0450 - * Size: 5/8" (16 mm)	$2.15
0413-0460 - * Size: 11/16" (18 mm)	$2.15
0413-0465 - * Size: 3/4" (18, 20 mm)	$2.31
0413-0475 - * Size: 7/8" (22 mm)	$3.05
0413-0485 - * Size: 1" (24, 25 mm)	$3.05
0413-0500 - * Size: 1-1/8" (26, 28 mm)	$5.45
0413-0510 - * Size: 1-1/4" (30-32 mm)	$5.94
0413-0520 - * Size: 1-3/8" (35, 36 mm)	$5.94
0413-0530 - * Size: 1-1/2" (38 mm)	$6.93