…milling and drilling operations Table scale of 1 degree for angular indexing 360-degree manual rotation; 24 divisions (indexing every 15 degrees) Comes with 3-inch three-jaw chuck, two sets of jaws (inside and outside), and lathe chuck wrench

Related Searches: Mill Drill Lathe | Indexing Fixture | Mill Table | Lathe Chuck

…Hardened and ground 24-position index plate (15-degree increments) 360-degree satin chrome graduated ring with 10-second adjustable Vernier plate ensures accurate readings Fast, simple indexing of 2, 3, 4, 6, 8, 12 and 24 divisions Indexing unit complete with three-jaw chuck and six masking plates

Click to View all SKUs

Click to View Less SKUs

1992-0005 - * Concentricity: 0.0012" chuck, 0.0008" mounting flange * Parallelism: 0.0004" face to face * Size: 8" * Squareness: 0.0008" table base to chuck * Through Hole: 2-15/32	$895.00
1992-0020 - * Concentricity: 0.0012" chuck, 0.0008" mounting flange * Parallelism: 0.0004" face to face * Size: 6" * Squareness: 0.0008" table base to chuck * Through Hole: 1-23/32	$695.00

…Hardened and ground 24-position index plate with 15-degree increments 360-degree satin chrome graduated ring with 5-minute adjustable Vernier plate ensures accurate readings Fast and simple indexing of 2, 3, 4, 6, 8, 12 and 24 divisions Indexing unit includes three-jaw chuck and six masking plates

Click to View all SKUs

Click to View Less SKUs

1992-0015 - * Concentricity: 0.0012" (0.0008" mounting flange) * Parallelism: 0.0006" face to face * Size: 8" * Squareness: 0.0008" table base to chuck * Through Hole: 1-23/32" (6"); 2-15/32" (8")	$519.00
1992-0025 - * Concentricity: 0.0012" (0.0008" mounting flange) * Parallelism: 0.0006" face to face * Size: 6" * Squareness: 0.0008" table base to chuck * Through Hole: 1-23/32" (6"); 2-15/32" (8")	$419.00

This quick-change 2MT tailstock unit is supplied with three heads; 1/2-inch capacity chuck with key; live center; 1-inch outside diameter die holder; one 2-3MT drill sleeve; and two drill drifts. Chuck Size: 1/2" w/key Taper: 2MT

Related Searches: Tailstock | Die Holder | Quick Change Lathe | Lathe Centers

A rapid indexing fixture. Indexing is accomplished by releasing the spring-loaded index pin lever. Ratchet device on front of spindle permits rapid rotation of spindle nose. Possible divisions are 2, 3, 4, 6, 8 and 24. Center Height: 4" Base: 4" x 8" horiz., 4" x 6" vert. Net Weight: 28 lbs. Height:…

Related Searches: Indexing Fixture | 5c

A multi-purpose accessory. Index plate has precise ten, 36-hole circle Vernier settings to 1 degree. Spindle travel of 2-1/16 inches for easy flute grinding. Collets: 5C up to 1-1/8" Spindle Travel: 2-1/16" Accuracy: .0005"

Related Searches: Collet Chuck | 5c | Indexing Fixture

…-jaw chuck; and three dividing plates. Hardened and ground spindle is rigidly held in a tapered seat by draw-in nut. The phosphor-bronze worm gear is cut helically. The worm is hardened and ground, and the interlocking with the worm gear is easily adjustable. Can be disengaged for direct indexing. The…

Related Searches: Dividing Head | Dividers | Tailstock | Angle Plate

Click to View all SKUs

Click to View Less SKUs

1994-0005 - * Center Height: 3-15/16" * Concentricity: .0006" center; .0004" inside taper at spindle nose; .0012" at arbor (8") * Spindle Hole: .709 * Spindle Taper: B&S no. 7 * Swing: 7-1/8" * Type: Semi-universal	$295.00
1994-0010 - * Center Height: 5-3/64" * Concentricity: .0006" center; .0004" inside taper at spindle nose; .0012" at arbor (8") * Spindle Hole: .787 * Spindle Taper: B&S no. 9 * Swing: 10-3/32" * Type: Semi-universal	$399.00
1994-0015 - * Center Height: 5-15/64" * Concentricity: .0006" center; .0004" inside taper at spindle nose; .0012" at arbor (8") * Spindle Hole: .985 * Spindle Taper: B&S No. 10 * Swing: 10-15/32" * Type: Universal	$795.00

…capabilities. Heavy-duty cast iron bed adds stability while limiting vibration during operation Indexing mechanism enables fast, efficient fluting and veining operations; spindle has positive locking indexing in 10-degree increments Reeves pulley drive system allows quick variable speed changes from 450…

Related Searches: Jet Lathe | Wood Lathe