Features one each 6-inch three-jaw and four-jaw chucks; MT2 live center; MT2 and MT3 dead centers; center sleeve; toolbox; steady and follow rests; thread change gears; 8-inch faceplate; four-way turret; and 1/2-inch drill chuck.

Related Searches: 3 Jaw Chuck | 6 Jaw Chuck | Live Center

Click to View all SKUs

Click to View Less SKUs

3001-0005 - * Bed: 45" L x 7-5/32" W * Cross Slide Travel: 5-7/8 * Distance Bet. Centers: 23-5/8" * Hole Through Spindle: 1-3/8" * Motor: 1 hp, 1 ph., 120V AC, 60 Hz * Net Weight: 900 lbs. * Rod Dia: 3/4" * Saddle: 18-1/2" travel * Screw Dia: 7/8" lead screw (8 TPI) * Size: 12" x 24" * Spindle: 2-1/4 - 8 TPI * Spindle Bore: 5MT * Spindle Speed(s): 50-1,200 rpm * Swing Over Bed: Bed, 11-7/32" * Swing Over Cross Slide: 5-1/8" * Tailstock: MT3; 3-5/8" travel * Thread: 4-112 TPI * Travel: Tool, 2-1/2"

$1,895.00

3001-0010 - * Bed: 47" L x 7-5/32" W * Cross Slide Travel: 5-7/8" * Distance Bet. Centers: 36" * Hole Through Spindle: 1-3/8" * Motor: 1 hp, 1 ph., 120V AC, 60 Hz, mag switch * Net Weight: 980 lbs. * Rod Dia: 3/4" * Saddle: 33" travel * Screw Dia: 7/8" lead screw (8 TPI) * Size: 12" x 36" * Spindle: 2-1/4 - 8 TPI * Spindle Bore: MT5 * Spindle Speed(s): 50-1200 RPM * Swing Over Bed: 12" * Swing Over Cross Slide: 7" * Tailstock: MT3, 4" spindle travel * Thread: 4-112 TPI * Travel: Tool, 2-1/2"

$2,095.00

Standard features: lathe stand; 5-inch three-jaw chuck; 6-inch four-jaw chuck; 8-inch face plate; steady and follow rests; two lathe centers; oil bottle, toolbox and manual; and four-way tool post. Tailstock: 2-1/2" travel, 1-1/4" dia., 2MT taper Motor: 1 hp, 110V AC, 1 ph. Distance Bet. Centers: 26…

Related Searches: Lathe Tools | 4 Jaw Chuck | Way Oil

General featuress: Precision ground and hardened bedways Spindled supported with precision roller bearings Headstock gears made of hardened, ground, high-quality steel Easy operating speed changing levers Removable gap provided for larger diameter work Easy operating gearbox has various feeds and…

Related Searches: Threading Tools | 6 Jaw Chuck

Click to View all SKUs

Click to View Less SKUs

3001-0020 - * Bed: 7-3/8" W x 11-13/32" H x 54" L * Center Height: 6-1/2" * Cross Feeds: Inch, 0.0004" - 0.0106" rev. (40 kinds); metric, 0.100 - 0.268mm/rev. (40 kinds) * Longitudinal Feed: Inch, 0.0011" - 0.0311" rev. (40 kinds); metric, 0.028 - 0.791mm/rev. (40 kinds) * Motor: 2 hp, 3-phase * Spindle Hole: 1-1/2 * Spindle Speed(s): (18) 70-1,550 rpm * Swing: 13" over bed; 18" over gap * Tailstock: 1-1/4" quill dia. * Taper Shank: 5MT * Thread: 4-112 TPI (40 kinds)

$2,650.00

3001-0021 - * Bed: 7-3/8" W x 11-13/32" H x 54" L * Center Height: 6-1/2" * Cross Feeds: Inch, 0.0004"-0.0106". rev. (40 kinds); metric, 0.100 - 0.268mm/rev. (40 kinds) * Longitudinal Feed: Inch, 0.0011" - 0.0311" rev. (40 kinds); metric, 0.028 - 0.791mm/rev. (40 kinds) * Motor: 2 hp, single phase * Spindle Hole: 1-3/8" * Spindle Speed(s): (8) 70-2,000 RPM * Swing: 13" over bed; 18" over gap * Tailstock: 1-1/4" quill dia. * Taper Shank: 5MT * Thread: 4-112 TPI (40 kinds)

$2,695.00

Hardened and ground gears featured in headstock and gearbox Dl-4 spindle precision ground for accuracy and supported by high-quality tapered roller bearings Headstock constantly oiled during operation Splined, not keyed, shafts utilized in headstock Gearbox gives large threading and feed…

Related Searches: Jet Lathe | Threaded Rod

Standard features: 6-inch three-jaw chuck, 8-inch four-jaw chuck, 2MT live center, 2 and 3 MT dead centers, center sleeve, toolbox, steady and follow rests, thread change gears, 8-inch face plate, four-way turret and 1/2-inch drill chuck. Spindle: D1-4 Net Weight: 850 lbs. MT: 3MT Screw Dia: 7/8"…

Related Searches: Live Center | Drill Rod | 4 Jaw Chuck

Lathe features are variable speed, overload protection, inside lead screw, three-jaw chuck and MT1 dead center. Machine also comes with wrench set and oil can. Distance Bet. Centers: 9-3/4" Net Weight: 50 lbs. Dimensions: 8-1/2" H x 11-3/4" W x 24" L Motor: 150W Cross Slide Travel: 2" Spindle Speed(s…

Related Searches: Jet Lathe | 4 Jaw Chuck | Lathe Chuck

Attachments included are headstock spur center, faceplate, ball bearing tailstock center and tool rest. Dimensions: 26" L x 5-1/4" W x 10-1/2" H Spindle Speed(s): 500-4,000 rpm (variable speed) Distance Bet. Centers: 12" Mount: 3/4-16 Motor: 1/3 hp Net Weight: 45 lbs. Faceplate: 2", 5-3/4" Spindle:…

Related Searches: Mini Lathe | Wood Lathe

Features: Precision ground and hardened bed ways Spindle supported with precision roller bearings Head stock gears are high quality hardened and ground steel Easy operating speed change levers Removable gap provided for larger diameter work Easily operated gearbox has various feeds and thread…

Related Searches: Spindle Oil | Lathe Back Plates | Lathe Chuck

Click to View all SKUs

Click to View Less SKUs

3001-0015 - * Bed: 8" W x 11-31/32" H x 53-1/4" L * Center Height: 6-1/2" * Gap Length: 9" * Metric: 35-4.5 (22 kinds) * Motor: 2 hp, 3 ph. * Net Weight: 1,450 lbs. * Quill Dia: 1-1/4" * Quill Travel: 4" (3MT taper) * Spindle Hole: 1-1/2" * Spindle Speed(s): (8) 50-1,500 RPM * Swing: 14" over bed; 18-3/4" over gap * Thread: Metric, 22 (35-4.5); inch, 32 (4-56) * Type: Standard

$4,295.00

3001-0025 - * Bed: 8" W x 11-31/32" H x 53-1/4" L * Center Height: 6-1/2" * Compound Travel: 4" * Cross Travel: 7" * Gap Length: 9" * Includes: Taper attachment for up to 7" * Motor: 2 hp, 3 ph. * Net Weight: 1,560 lbs. * Quill Travel: 4" (3MT taper) * Spindle Hole: 1-1/2" * Spindle Speed(s): 8 (50-1,500 RPM) * Swing: 14" over bed; 18-3/4" over gap * Tailstock: 1-1/4" quill dia. * Thread: Metric, 22 (35-4.5); inch, 32 (4-56) * Type: W/taper attachment

$4,695.00

8-inch three-jaw chuck and adapter 12-inch four-jaw independent chuck and adapter 12-inch face plates Steady and follow rests Thread chasing dial MT 6/2 sleeve and MT 4 center Oil gun, one set of wrenches and operating manual Cross adjustment, ± 1/2 inch Spindle Taper: 6MT Thread: Metric, 39 kinds…

Spindle is supported by precision tapered roller bearings Hardened and ground bedways Power longitudinal feed allows threading Standard 1-1/2-inch by 8 TPI spindle nose allows for many aftermarket accessories Reversing switch is included for added versatility Backlash adjustments are provided…

Related Searches: 9 X 20 Lathe | Lathe Back Plates | Jet Lathe