A straight cut-off tool holder, plus three first quality blades for one low price. Holder is drop forged, and blades are high speed steel.

Related Searches: Cutoff Blade | Cut Off Blade | Cutoff Tool

Click to View all SKUs

Click to View Less SKUs

2205-9980 - * Shank: 5/16" x 13/16" x 4-1/2" * Size: 3/32" x 1/2" x 4-1/2" blade	$19.00
2205-9981 - * Shank: 3/8" x 7/8" x 5" * Size: 3/32" x 5/8" x 5" blade	$22.00
2205-9982 - * Shank: 1/2" x 1-1/8" x 6" * Size: 1/8" x 3/4" x 6" blade	$30.00

…features: lathe stand; 5-inch three-jaw chuck; 6-inch four-jaw chuck; 8-inch face plate; steady and follow rests; two lathe centers; oil bottle, toolbox and manual; and four-way tool post. Tailstock: 2-1/2" travel, 1-1/4" dia., 2MT taper Motor: 1 hp, 110V AC, 1 ph. Distance Bet. Centers: 26" Tool Size: 1…

Related Searches: Lathe | 4 Jaw Chuck | Way Oil

…mini-lathe (order no. 3003-0025) and deluxe quick change tool post set (order no. 3003-0305). Lathe features: Use for drilling, boring, taper cutting, threading, cylinder turning and counterfacing 3-inch three-jaw chuck Automatic feed cutting Spindle travel tailstock UL approved Quick change tool post…

Related Searches: Mini Lathe | Quick Change Tool Post | Lathe

…lathe kit (order no. 2205-9910) but also comes with extra bits. Main components are as follows: Adjustable turning tool holder, with 5/16-inch square shank and 1/8-inch square high speed steel tool bit Adjustable turning tool holder, with 5/16-inch square shank left and 1/8-inch high speed square tool…

Related Searches: Mini Lathe

Hardened tool steel, accurately ground. Slightly tapered. Size marked on the end.

Related Searches: Mandrel

Click to View all SKUs

Click to View Less SKUs

1638-0005 - * OAL: 2-1/2" * Size: 1/8"	$5.50
1638-0010 - * OAL: 3" * Size: 5/32"	$5.50
1638-0015 - * OAL: 3" * Size: 3/16"	$5.90
1638-0020 - * OAL: 3-3/4" * Size: 7/32"	$5.90
1638-0025 - * OAL: 3-3/4" * Size: 1/4"	$6.10
1638-0030 - * OAL: 4" * Size: 9/32"	$6.30
1638-0035 - * OAL: 4" * Size: 19/64"	$6.30
1638-0040 - * OAL: 4" * Size: 5/16"	$4.00
1638-0050 - * OAL: 4-1/4" * Size: 11/32"	$6.70
1638-0055 - * OAL: 4-1/4" * Size: 23/64"	$6.70
1638-0060 - * OAL: 4-1/4" * Size: 3/8"	$4.00
1638-0065 - * OAL: 4-1/2" * Size: 13/32"	$7.10
1638-0070 - * OAL: 4-1/2" * Size: 7/16"	$3.75
1638-0075 - * OAL: 5" * Size: 15/32"	$7.50
1638-0080 - * OAL: 5" * Size: 1/2"	$7.50
1638-0085 - * OAL: 5-1/4" * Size: 17/32"	$4.00
1638-0090 - * OAL: 5-1/4" * Size: 9/16"	$8.20
1638-0095 - * OAL: 5-1/2" * Size: 19/32"	$8.20
1638-0100 - * OAL: 5-1/2" * Size: 39/64"	$6.20
1638-0105 - * OAL: 5-1/2" * Size: 5/8"	$8.20
1638-0110 - * OAL: 5-3/4" * Size: 21/32"	$8.20
1638-0115 - * OAL: 5-3/4" * Size: 11/16"	$8.20
1638-0120 - * OAL: 6" * Size: 23/32"	$8.75
1638-0125 - * OAL: 6" * Size: 3/4"	$9.00
1638-0130 - * OAL: 6-1/4" * Size: 25/32"	$9.50
1638-0135 - * OAL: 6-1/4" * Size: 13/16"	$9.50
1638-0140 - * OAL: 6-1/2" * Size: 27/32"	$5.00
1638-0145 - * OAL: 6-1/2" * Size: 7/8"	$8.95
1638-0150 - * OAL: 6-3/4" * Size: 29/32"	$5.75
1638-0155 - * OAL: 6-3/4" * Size: 15/16"	$12.90
1638-0160 - * OAL: 7" * Size: 31/32"	$6.00
1638-0163	$12.90
1638-0165 - * OAL: 7-1/4" * Size: 1-1/16"	$9.95
1638-0175 - * OAL: 7-1/2" * Size: 1-5/32"	$8.00
1638-0180 - * OAL: 7-3/4" * Size: 1-3/16"	$10.00
1638-0185 - * OAL: 7-3/4" * Size: 1-7/32"	$10.00
1638-0190 - * OAL: 8" * Size: 1-1/4"	$7.00
1638-0195 - * OAL: 8-1/4" * Size: 1-5/16"	$10.00
1638-0200	$22.30
1638-0205 - * OAL: 8-1/2" * Size: 1-13/64"	$12.00
1638-0210 - * OAL: 8-3/4" * Size: 1-7/16"	$17.00
1638-0215 - * OAL: 9" * Size: 1-15/32"	$13.00
1638-0220 - * OAL: 9" * Size: 1-1/2"	$26.90
1638-0225 - * OAL: 9-1/4" * Size: 1-9/16"	$16.50
1638-0230 - * OAL: 9-1/2" * Size: 1-5/8"	$17.00
1638-0235 - * OAL: 9-3/4" * Size: 1-11/16"	$31.25
1638-0250 - * OAL: 10-1/4" * Size: 1-13/16"	$17.00
1638-0260 - * OAL: 10-3/4" * Size: 1-15/16"	$17.00

These adjustable boring bars from Criterion are especially suited to NC lathes or mills. Precise adjustments are easily made while the tool is in the machine or when presetting in a tool block. The unique cantilevered dovetail design assures exceptional rigidity, even in an offset position. An easily…

Related Searches: Criterion | Lathe | Boring Bar

Click to View all SKUs

Click to View Less SKUs

2211-0425 - * Insert I.C.: .250 * Max Bore: 15/16" * Min Bore: 3/4" * OAL: 5-1/4" * Shank: 5/8" * Tool No.: MD-625TX	$293.15
2211-0430 - * Insert I.C.: .375" * Max Bore: 1-3/16" * Min Bore: 15/16" * OAL: 6-5/16" * Shank: 3/4" * Tool No.: MD-750TX	$337.85
2211-0435 - * Insert I.C.: .375" * Max Bore: 1-5/8" * Min Bore: 1-3/16" * OAL: 8-1/4" * Shank: 1" * Tool No.: MD-1000TX	$397.35
2211-0440 - * Insert I.C.: .375 * Max Bore: 2-3/8" * Min Bore: 1-7/16" * OAL: 10-5/16" * Shank: 1-1/4" * Tool No.: MD-1250TX	$453.80

Cut threads on any lathe fitted with a Morse taper tailstock Improves thread quality with fewer part rejections over hand-held method Four to five times faster than threading with a single point tool Reduces chance for operator injury Heads or shanks available separately; see description below for item…

Related Searches: Lathe Die Holder | Die Holder | Tailstock

Click to View all SKUs

Click to View Less SKUs

0513-0050 - * Fits Die OD: 1" * Fits Head Number: ---- * For MT: 2 * Head Number: FDH1-2 * Max Thread Length: 2-3/8" * Shank: ---- * Type: Head	$56.50
0513-0055 - * Fits Die OD: 1" * Fits Head Number: ---- * For MT: 3, 4 * Head Number: FDH1-34 * Max Thread Length: 3" * Shank: ---- * Type: Head	$67.00
0513-0060 - * Fits Die OD: 1-1/2" * Fits Head Number: ---- * For MT: 3, 4 * Head Number: FDH15-34 * Max Thread Length: 3" * Shank: ---- * Type: Head	$67.00
0513-0065 - * Fits Die OD: 2" * Fits Head Number: ---- * For MT: 3, 4 * Head Number: FDH2-34 * Max Thread Length: 3" * Shank: ---- * Type: Head	$74.00
0513-0070 - * Fits Head Number: FDH1-2 * For MT: 2 * Shank: FDHS-2T * Type: Shank	$55.50
0513-0075 - * Fits Head Number: FDH1-34, 15-34, 2-34 * For MT: 3 * Shank: FDHS-3T * Type: Shank	$74.00
0513-0080 - * Fits Head Number: FDH1-34, 15-34, 2-34 * For MT: 4 * Shank: FDHS-4T * Type: Shank	$86.25

…fed into the workpiece with two-hand or fingertip control, affording a more sensitive feel and reducing tap breakage. Held true in a lathe or drill press chuck, the tool is supported and aligned while being turned by hand.

Related Searches: Tap Guide | Tapping | Hand Tapper | Tool Post

Click to View all SKUs

Click to View Less SKUs

0413-0665 - * Size: #0-1/4"	$35.15 $34.76
0413-0670 - * Size: #12-1/2"	$45.10 $44.60

…drilling using high speed machinery Consistent precision operation runs without downtime Multiple operations on a single setup Applicable to mills, lathes, drill presses and jig borers, and also to all keyed or keyless model chucks with 0JT mounts Order no. 1850-0535 version of this fixture includes a…

Related Searches: Chuck | Precision Drill | Drill Chuck

Click to View all SKUs

Click to View Less SKUs

1850-0530 - * Capacity: 0-5/32" * Includes: Fixture only	$29.00
1850-0535 - * Capacity: 0-5/32 * Includes: 0 Jacobs chuck	$85.75

This stop will convert a standard 1-inch capacity lathe collet into a solid stop or spring ejector stop collet, without any alterations.