Rotating spindle extended right through the tapered shank Two specially designed adjustable needle roller bearings carry all radial loads Heavy-duty ball thrust bearing takes all axial thrust Built-in oil seal provides complete protection of bearings from the entry of coolant, dirt or swarf and…

Related Searches: Lathe | Lathe Centers | Center

Click to View all SKUs

Click to View Less SKUs

1824-0005 - * Angle: 60° * Body Dia: 1-3/8" x 4-3/8" * Diameter: 5/8" * Max Piece Weight: 200 lbs. * Net Center Weight: 1.1 lbs. * Type: 1MT	$71.30
1824-0010 - * Angle: 60° * Body Dia: 1-1/2" x 5" * Diameter: 7/8" * Max Piece Weight: 600 lbs. * Net Center Weight: 1.4 lbs. * Type: 2MT	$106.35
1824-0015 - * Angle: 60° * Body Dia: 1-7/8" x 6-1/4" * Diameter: 1-1/8" * Max Piece Weight: 900 lbs. * Net Center Weight: 2.8 lbs. * Type: 3MT	$133.00
1824-0020 - * Angle: 60° * Body Dia: 2-3/16" x 7-1/2" * Diameter: 1-1/2" * Max Piece Weight: 1,800 lbs. * Net Center Weight: 4.8 lbs. * Type: 4MT	$168.60
1824-0025 - * Angle: 60° * Body Dia: 2-3/4" x 9-1/2" * Diameter: 1-3/4" * Max Piece Weight: 3,000 lbs. * Net Center Weight: 10.5 lbs. * Type: 5MT	$233.50
1824-0030 - * Angle: 60° * Body Dia: 3-1/2" x 12-3/4" * Diameter: 2-3/8" * Max Piece Weight: 7,500 lbs. * Net Center Weight: 39.0 lbs. * Type: 6MT	$404.85

Self locking, adjustable bearing cap. Three bearings, two roller and one needle. Ball bearings take axial loads, and the needle takes the radial loads. Bearings are sealed into housing.

Related Searches: Lathe Centers | Center

Click to View all SKUs

Click to View Less SKUs

1825-0005 - * Angle: 60° * Max. Piece Weight (lbs.): 200 * Type: 1MT	$15.50
1825-0010 - * Angle: 60° * Max. Piece Weight (lbs.): 600 * Type: 2MT	$18.95
1825-0015 - * Angle: 60° * Max. Piece Weight (lbs.): 900 * Type: 3MT	$21.95
1825-0020 - * Angle: 60° * Max. Piece Weight (lbs.): 1,800 * Type: 4MT	$27.95
1825-0025 - * Angle: 60° * Max. Piece Weight (lbs.): 3,000 * Type: 5MT	$42.50

Quality WT Import centers for your lathe; Morse Taper 2 to 5 available.

Related Searches: Lathe Centers | Bull Nose Live Center | Morse Taper

Click to View all SKUs

Click to View Less SKUs

1827-0005 - * Angle: (a) 60° * Diameter: (D) 3.02"; (d) 1.0" * Length: (A) 5.0"; (a1) 2.02"; (a2) 1.805" * Type: 2MT	$48.75
1827-0010 - * Angle: (a) 75° * Diameter: (D) 4.21"; (d) 1.26" * Length: (A) 6.5"; (a1) 2.76"; (a2) 1.93" * Type: 3MT	$90.00
1827-0015 - * Angle: (a) 75° * Diameter: (D) 5.09"; (d) 1.38" * Length: (A) 7.62"; (a1) 3.07"; (a2) 2.44" * Type: 4MT	$111.25
1827-0020 - * Angle: (a) 75° * Diameter: (D) 6.61"; (d) 1.57" * Length: (A) 9.96"; (a1) 4.25"; (a2) 3.28" * Type: 5MT	$186.25

Great on the lathe for supporting workpieces with large end openings, or tubing.

Click to View all SKUs

Click to View Less SKUs

1827-0050 - * Diameter: .625" small end; 2.48" large end * Taper: 70° * Type: 2MT	$37.50
1827-0055 - * Diameter: .625" small end; 2.48" large end * Taper: 75° * Type: 3MT	$71.00
1827-0060 - * Diameter: .625" small end; 3.07" large end * Taper: 75° * Type: 4MT	$86.25
1827-0065 - * Diameter: 1.25" small end; 4.17" large end * Taper: 75° * Type: 5MT	$152.00

Features rotating spindle and needle roller bearings. Slight imperfections on finish; tooling not affected. Closeout pricing. Capacity: 039"-1.259" standard point; .551"-1.496" bull nose; .787"-2.362" cup nose; .315"-1.259" cone Morse Taper: 5 Pieces: 7 Diameter: 1.771" gripper

N/C live centers. Designed to withstand dust, chips and coolant getting inside the bearings. High speed operation is guaranteed within .0002 inch. Hardened to 61-65 Rockwell C and ground. Load factor is higher than standard live centers.

Related Searches: Lathe Centers

Click to View all SKUs

Click to View Less SKUs

1825-0030 - * A: 1-7/16" * B: 1-3/4" * C: 3-3/8" * D: 1-3/4" * E: 7/8" * L: 6-1/2" * Type: 3MT	$45.00
1825-0035 - * A: 1-7/16" * B: 1-3/4" * C: 4-1/4" * D: 1-3/4" * E: 7/8" * L: 7-3/8" * Type: 4MT	$49.00
1825-0040 - * A: 2-1/2" * B: 2-3/4" * C: 5-3/8" * D: 3-1/8" * E: 1-9/16" * L: 10-5/8" * Type: 5MT	$99.00
1825-0045 - * A: 3-3/16" * B: 3-1/4" * C: 7-3/16" * D: 4" * E: 2" * L: 14" * Type: 6MT	$139.00

With six interchangeable points Includes 60-degree points -- standard, large, inside taper, small bull nose and large bull nose; and 30-degree tracing point Precision needle bearings used for high accuracy and long life Because point and head act like a solid, can be used for heavy-duty work.

Related Searches: Lathe | Lathe Centers | Bull Nose Live Center

Click to View all SKUs

Click to View Less SKUs

1825-9931 - * Dimensions: Point 1, .551" max. dia. * Type: 2MT	$85.90
1825-9932 - * Dimensions: Point 3, .787" min. dia., 1.378" max dia. * Type: 3MT	$107.50
1825-9933 - * Dimensions: (Point 2) 1.26" max. dia. * Type: 4MT	$132.00

Features rotating spindle and needle roller bearings. Slight imperfections on finish; tooling not affected. Closeout pricing. Morse Taper: 4 Diameter: 1.259" gripper Pieces: 7 Capacity: .019"-.984" standard point; .393"-1.378" bull nose; .669"-2.086" cup nose; .196"-.984" cone

Features one each 6-inch three-jaw and four-jaw chucks; MT2 live center; MT2 and MT3 dead centers; center sleeve; toolbox; steady and follow rests; thread change gears; 8-inch faceplate; four-way turret; and 1/2-inch drill chuck.

Related Searches: Lathe | Drill Sleeve | 6 Jaw Chuck

Click to View all SKUs

Click to View Less SKUs

3001-0005 - * Bed: 45" L x 7-5/32" W * Cross Slide Travel: 5-7/8 * Distance Bet. Centers: 23-5/8" * Hole Through Spindle: 1-3/8" * Motor: 1 hp, 1 ph., 120V AC, 60 Hz * Net Weight: 900 lbs. * Rod Dia: 3/4" * Saddle: 18-1/2" travel * Screw Dia: 7/8" lead screw (8 TPI) * Size: 12" x 24" * Spindle: 2-1/4 - 8 TPI * Spindle Bore: 5MT * Spindle Speed(s): 50-1,200 rpm * Swing Over Bed: Bed, 11-7/32" * Swing Over Cross Slide: 5-1/8" * Tailstock: MT3; 3-5/8" travel * Thread: 4-112 TPI * Travel: Tool, 2-1/2"

$1,895.00

3001-0010 - * Bed: 47" L x 7-5/32" W * Cross Slide Travel: 5-7/8" * Distance Bet. Centers: 36" * Hole Through Spindle: 1-3/8" * Motor: 1 hp, 1 ph., 120V AC, 60 Hz, mag switch * Net Weight: 980 lbs. * Rod Dia: 3/4" * Saddle: 33" travel * Screw Dia: 7/8" lead screw (8 TPI) * Size: 12" x 36" * Spindle: 2-1/4 - 8 TPI * Spindle Bore: MT5 * Spindle Speed(s): 50-1200 RPM * Swing Over Bed: 12" * Swing Over Cross Slide: 7" * Tailstock: MT3, 4" spindle travel * Thread: 4-112 TPI * Travel: Tool, 2-1/2"

$2,095.00

…360 degrees, with positive stops at 45 and 90 degrees, and may be positioned anywhere along the bedways for maximum flexibility and user comfort Live center has a removable pin for boring through stock Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use…

Related Searches: Wood Lathe | 9 X 20 Lathe | Lathe Centers