Heavy duty. Keyless chuck is designed for machinery where gripping power and accuracy are a must. Use with drill presses, jig bores, milling machines and production drilling equipment. Includes arbor.

Related Searches: Keyless Chuck | Chuck Arbor | Drill Chuck With Arbor | R8 Drill Chuck Arbor

Click to View all SKUs

Click to View Less SKUs

1850-0280 - * Arbor: 2MT * Capacity: 1/8 - 5/8 * Mount: 6JT	$36.00
1850-0285 - * Arbor: 3MT * Capacity: 1/8 - 5/8 * Mount: 6JT	$36.00
1850-0290 - * Arbor: 4MT * Capacity: 1/8 - 5/8 * Mount: 6JT	$36.00
1850-0295 - * Arbor: 1/2 SS * Capacity: 1/8 - 5/8 * Mount: 6JT	$36.00
1850-0300 - * Arbor: 5/8 SS * Capacity: 1/8 - 5/8 * Mount: 6JT	$36.00
1850-0305 - * Arbor: 3/4 SS * Capacity: 1/8 - 5/8 * Mount: 6JT	$36.00
1850-0310 - * Arbor: R8 * Capacity: 1/8 - 5/8 * Mount: 6JT	$42.00

…-piece high speed drill set with sizes 1, 1-1/8, 1-1/4, 1-3/8 and 1-1/2 inches with wood stand. Also includes a 3/4-inch drill chuck with R8 shank and key Four-piece R8 end mill holder set in sizes 3/8, 1/2, 3/4 and 1 inch with wood stand.

Related Searches: R8 End Mill Holder | R8 Chuck | Mill Package | Mill Kit

Shanks are round but without Weldon screw flats. All other specs are first class. It is recommended to run these mills in a collet or a chuck. Single end.

Related Searches: End Mill | Collet

Click to View all SKUs

Click to View Less SKUs

0970-0006 - * Diameter: 1/8" * Flute Length: 3/8" * OAL: 2-5/16" * Shank: 3/8"	$2.00
0970-0051 - * Diameter: 13/32" * Flute Length: 13/16" * OAL: 2-1/2" * Shank: 3/8"	$1.50
0970-0078 - * Diameter: 9/16" * Flute Length: 1-1/8" * OAL: 3-1/8" * Shank: 1/2"	$3.25
0970-0095 - * Diameter: 11/16" * Flute Length: 1-5/16" * OAL: 3-7/16" * Shank: 1/2"	$3.75
0970-0121 - * Diameter: 13/16" * Flute Length: 1-1/2" * OAL: 3-3/4" * Shank: 3/4"	$4.25
0970-0128 - * Diameter: 7/8" * Flute Length: 1-1/2" * OAL: 3-3/4" * Shank: 7/8"	$6.00
0970-0166 - * Diameter: 1" * Flute Length: 1-5/8" * OAL: 4-1/8" * Shank: 1"	$5.00
0970-0186 - * Diameter: 1" * Flute Length: 1-1/2" * OAL: 3-3/4" * Shank: 3/4"	$5.00
0970-0221 - * Diameter: 1-1/4" * Flute Length: 1-5/8" * OAL: 4-1/8" * Shank: 1"	$6.00
0970-0226 - * Diameter: 1-1/4" * Flute Length: 1-5/8" * OAL: 3-7/8" * Shank: 7/8"	$6.00
0970-0251 - * Diameter: 1-3/8" * Flute Length: 1-5/8" * OAL: 3-7/8" * Shank: 3/4"	$6.50
0970-0261 - * Diameter: 1-1/2" * Flute Length: 1-5/8" * OAL: 4-1/8" * Shank: 1"	$7.00
0972-0029 - * Diameter: 1/2" * Flute Length: 2" * OAL: 4" * Shank: 1/2" * Type: Single end long	$3.75
0972-0044 - * Diameter: 5/8" * Flute Length: 2" * OAL: 4-1/8" * Shank: 5/8" * Type: Single end long	$4.25

…turns, mills, drills and cuts threads Drill/mill head rotates 180 degrees; turns, mills, drills and cuts threads Workable feed can be controlled automatically and manually in longitudinal and cross direction. Cross direction provides power feed for milling operation. Includes 5-inch three-jaw chuck, 3MT…

Related Searches: Multi-purpose Machine | Milling Machine | R8 Drill Chuck Arbor | R8 Arbor

…Drilling Capacity: 1-1/4" Face Mill Capacity: 3/4" Swing: 15-7/8" Column Dia: 4-1/2" Quill Travel: 5"; with power feed, 4-1/4" Table Size: 9-1/2" x 31-3/4" Motor: 2 hp, 1 ph., 230V only Overall Dimensions: 42" L x 40" W x 52" H Net Weight: 787 lbs. Chuck Size: 1/2" End Mill Capacity: 3/4" Downfeed: .004…

Related Searches: Mill | Mill Table | Jet Mill Drill | Milling Machine

Shanks are round but without Weldon screw flats. All other specs are first class. It is recommended to run these mills in a collet or a chuck. Single end.

Related Searches: Collet | End Mill

Click to View all SKUs

Click to View Less SKUs

0970-0038 - * Diameter: 5/16" * Flute Length: 9/16" * OAL: 2-5/16" * Shank: 3/8"	$2.00
0970-0108 - * Diameter: 3/4" * Flute Length: 1-5/16" * OAL: 3-7/16" * Shank: 3/4"	$4.00

Forward and reversing switch for tapping. Head swivels 360 degrees. Comes with stand, 1/2-inch chuck and a 2-1/2 inch angle vise. Cross Slide Travel: 7" (X) Column Dia: 4-1/2" Spindle Taper: R8 Feed: .004, .005, .009, .011, .014; and .017 rev. Spindle Distance: Nose to table, 18" Spindle Dia: 3" sleeve…

Related Searches: Power Feed | Milling Machine

Shank is round but without Weldon screw flats. All other specs are first class. It is recommended to run this mill in a collet or a chuck. Single end. Flute(s): 3 Diameter: 1/2" Shank: 1/2" Flute Length: 1-1/4" OAL: 3-1/4"

…sits on a work table Four-piece R8 end mill holder set in sizes 3/8, 1/2, 3/4 and 1 inch, with wood stand. Five-piece 3/4-inch high speed steel drill set with sizes 1, 1-1/8, 1-1/4, 1-3/8 and 1-1/2 inches. Includes wood stand. Also includes a 3/4-inch drill chuck with R8 shank and key

Related Searches: Mill Clamp | Drill Chuck | Mill Package | R8 End Mill Holder

Two-speed motor. Ten speeds with a high/low switch. Includes drill chuck, arbor and stand. Dimensions: 23" x 34" x 45" (without stand) Table Area: 22" x 20" Spindle Distance: Nose to table, max. 23-5/8" Swing: 38-5/8" Column Dia: 4-1/2" Spindle Taper: 3MT Spindle: 5" stroke, 3" dia. sleeve Motor: 1-1…