…set; R8 end mill holder set; and five R8 collets. Details below. 58-piece Bridgeport clamping kit: 24 1/2-inch studs for 5/8-inch table slot Four each 3-, 4-, 5-, 6-, 7- and 8-inch lengths Six T-slot nuts Four coupling nuts Six flange nuts Six pairs of steel step blocks Three pairs of steel step clamps…

Related Searches: R8 Collet | R8 End Mill Holder | R8 Set | Mill Clamp

Set consists of one base and two inserts. Made of 1018 mild steel.

Related Searches: Mill Clamp | Clamp Set

Click to View all SKUs

Click to View Less SKUs

1951-0400 - * Bolt Hole Dia: 1/2" * Dimensions: (A) 5.5"; (B) 2.125"; (width) 1.25"; (D) 3.838"; (E) 1.74"; (F) 1"; (G) .75"	$153.00
1951-0405 - * Bolt Hole Dia: 3/4" * Dimensions: (A) 8"; (B) 2.75"; (width) 2"; (D) 5.675"; (E) 2.375" (F) 1.25" (G) 1.25"	$275.00
1951-0410 - * Bolt Hole Dia: 1" * Dimensions: (A) 10"; (B) 3.75"; (width) 2.5"; (D) 7.259"; (E) 2.859"; (F) 1.75"; (G) 1.75"	$336.00

…of steel step blocks Three pairs of steel step clamps One fitted steel rack that mounts on a wall or sits on a work table Four-piece R8 end mill holder set in sizes 3/8, 1/2, 3/4 and 1 inch, with wood stand. Five-piece 3/4-inch high speed steel drill set with sizes 1, 1-1/8, 1-1/4, 1-3/8 and 1-1/2 inches…

Related Searches: Mill Clamp | Drill Chuck | Mill Package | R8 End Mill Holder

…coupling nuts Six flange nuts Six pairs of steel step blocks Three pairs of steel step clamps One fitted steel rack that mounts on a wall or sits on a work table 20-piece titanium nitride (TiN) coated end mill set two-flute and four-flute in the following sizes: 3/16 x 3/8 1/4 x 3/8 5/16 x 3/8 3/8 x…

Related Searches: R8 End Mill Holder | R8 Chuck | Mill Package | Mill Kit

…Uses standard 1/2-inch IC square inserts. Clamps are interchangeable for all sizes. Easy stock removal on low horsepower machines. Higher metal removal rates. Fine surface finished. Note: Do not use SPG 424 inserts (1/16 radius) on the 15-degree quad mills.

Related Searches: R8 | End Mill Sets | Milling Machine | Mill Clamp

Click to View all SKUs

Click to View Less SKUs

1086-9920 - * No. of Inserts: 1 each * Shank: R8 Bridgeport * Size: 1", 1-1/4", 1-1/2" cutters; 45° lead	$79.00
1086-9930 - * No. of Inserts: 3, 4, 5 * Shank: R8 Bridgeport * Size: 2", 2-1/2", 3" cutters; 45° lead	$149.00
1086-9940 - * No. of Inserts: 1, 1, and 1 * Shank: 3/4" Weldon * Size: 1", 1-1/4", 1-1/2" cutters; 45° lead	$69.00
1086-9960 - * No. of Inserts: 3, 5, and 5 * Shank: R8 Bridgeport * Size: 2", 2-1/2", 3" cutters; 15° lead	$149.00
1086-9980 - * No. of Inserts: 3, 5, and 5 * Shank: 1-1/4" Weldon * Size: 2", 2-1/2", 3" cutters; 15° lead	$95.00

Case hardened steel. V-blocks in this set are case hardened and may be used singly or in pairs in layout work and to firmly hold circular stock during drilling, milling, and grinding operations. A feature in this set is the 6-inch steel rod that passes through each block and is firmly held by friction…

Related Searches: V-blocks | Steel Rod | V Block | Starrett

Click to View all SKUs

Click to View Less SKUs

1240-2370 - * Capacity: 1-1/4" * Type: 2 V-blocks	$62.00
1240-2375 - * Capacity: 1-1/4" * Type: Clamp only	$18.50
1240-2380 - * Capacity: 1-1/4" * Type: 2 V-blocks & 1 clamp	$81.00

…“clutch styleâ€Â� clamps Set screw permanently molded into the sliding arm and interlocks with serration on six sides of the rail for non-slip grip; the greater the pressure, the tighter the grip The cold drawn, profiled steel rail is made in Bessey's own mill for total control on quality…

Click to View all SKUs

Click to View Less SKUs

3108-0300 - * Capacity: 6" * Pressure: 600 lbs. * Rail: 1" x 1/4" * Spindle Dia: 3/4" * Throat Depth: 2-1/2"	$11.76
3108-0305 - * Capacity: 12" * Pressure: 600 lbs. * Rail: 1" x 1/4" * Spindle Dia: 3/4" * Throat Depth: 2-1/2"	$12.55
3108-0310 - * Capacity: 18" * Pressure: 600 lbs. * Rail: 1" x 1/4" * Spindle Dia: 5/8" * Throat Depth: 2-1/2"	$13.85
3108-0315 - * Capacity: 24" * Pressure: 600 lbs. * Rail: 1" x 1/4" * Spindle Dia: 5/8" * Throat Depth: 2-1/2"	$15.01
3108-0320 - * Capacity: 30" * Pressure: 660 lbs. * Rail: 1" x 1/4" * Spindle Dia: 5/8" * Throat Depth: 2-1/2"	$16.84
3108-0325 - * Capacity: 8" * Pressure: 880 lbs. * Rail: 1" x 5/16" * Spindle Dia: 5/8" * Throat Depth: 4"	$17.57
3108-0330 - * Capacity: 16" * Pressure: 880 lbs. * Rail: 1" x 5/16" * Spindle Dia: 5/8" * Throat Depth: 4"	$23.53
3108-0335 - * Capacity: 24" * Pressure: 880 lbs. * Rail: 1" x 5/16" * Spindle Dia: 5/8" * Throat Depth: 4"	$30.22

…tightened to 1,000 pounds clamping pressure Large parallel jaws distribute even pressure across entire surface to stop bowing, turning and lifting of work; design guarantees the jaws are always at a 90-degree angle to the rail Locking system won’t let go and features dual set screws that are permanently…

Related Searches: Clamp

Click to View all SKUs

Click to View Less SKUs

3108-0340 - * Capacity: 12" * Pressure: 1,000 lbs. * Throat Depth: 3-1/2"	$34.51
3108-0345 - * Capacity: 24" * Pressure: 1,000 lbs. * Throat Depth: 3-1/2"	$37.65
3108-0350 - * Capacity: 31" * Pressure: 1,000 lbs. * Throat Depth: 3-1/2"	$41.31
3108-0355 - * Capacity: 40" * Pressure: 1,000 lbs. * Throat Depth: 3-1/2"	$44.45

Special package from JET includes free 52-piece clamping kit and 1-2-3 block set ($165 value), and free shipping directly from the manufacturer. Features: One-piece cast iron column for added support Belt cover quick slide latch allows faster adjustment to change spindle speeds Base taper for easier…

Related Searches: Mill | Mill Table | Jet Mill Drill | Milling Machine

Economical, simple and easy to use in precision clamping of parts in drilling, boring, milling, grinding and assembly work Unique in the field of clamping aid techniques Practical and reliable for precise vertical workpiece positioning Ideal for clamping a group of flat workpieces Can readily be used…

Related Searches: Mill Clamp | Parallel Set | Parallels