A low profile cam action clamp with positive down force. This clamp is mounted in the T-slots of machine tables by sliding the clamp to the workpiece and tightening the locking screw. Total distance of movement is .100. Two clamping edges are smooth for machined surfaces and serrated for rough cut material…

Related Searches: Edge Clamp | Clamp

Click to View all SKUs

Click to View Less SKUs

1351-0005 - * A: 1.94 * B: 1.12 * C: .62 * D: 1.00 * E: .38 * Size: For 9/16" T-slots	$40.20
1351-0010 - * A: 1.94 * B: 1.12 * C: .62 * D: 1.00 * E: .38 * Size: For 5/8" T-slots	$40.20
1351-0015 - * A: 1.94 * B: 1.12 * C: .62 * D: 1.00 * E: .38 * Size: For 11/16" T-slots	$40.20
1351-0020 - * A: 1.94 * B: 1.12 * C: .62 * D: 1.00 * E: .38 * Size: For 3/4" T-slots	$42.55

Locks in machine T-slot for low profile clamping Makes fast setups possible right on the machine table Brass hex follows contour of unusual shaped parts Packaged in pairs or complete kits Consists of four Mitee-Bite T-nuts, six Mitee-Bite cam clamps and two hex keys

Related Searches: Mitee

Click to View all SKUs

Click to View Less SKUs

1351-9898 - * Distance: .040" * Holding Pressure: 800 lbs. * Screw Size: 1/4-20 * Size: 5/8" x 3/16" hex * Table Slot: 3/8" * Thread Lgth.: 1/2"	$102.50
1351-9899 - * Distance: .040" * Holding Pressure: 750 lbs. * Screw Size: 5/16-18 * Size: 13/16" x 3/16" hex * Table Slot: 7/16" * Thread Lgth.: 1/2"	$102.50
1351-9900 - * Distance: .050" * Holding Pressure: 2,000 lbs. * Screw Size: 3/8-16 * Size: 13/16" x 1/4" hex * Table Slot: 1/2" * Thread Lgth.: 3/4"	$102.50
1351-9904 - * Distance: .050" * Holding Pressure: 2,000 lbs. * Screw Size: 3/8-16 * Size: 13/16" x 1/4" hex * Table Slot: 9/16" * Thread Lgth.: 3/4"	$102.50
1351-9905 - * Distance: .100" * Holding Pressure: 4,000 lbs. * Screw Size: 1/2-13 * Size: 1" x 3/8" hex * Table Slot: 5/8" * Thread Lgth.: 1"	$102.50
1351-9906 - * Distance: .100" * Holding Pressure: 4,000 lbs. * Screw Size: 1/2-13 * Size: 1" x 3/8" hex * Table Slot: 11/16" * Thread Lgth.: 1"	$102.50

The cam action fixture clamp from Mitee-Bite Products Co. is made up of two simple components: a hardened steel socket cap screw with an offset head and a hexagonal washer. The low profile makes computer programming easier, the small size allows more parts per load, and the simple design keeps costs…

Related Searches: Fixture Clamp | Mitee-bite

Click to View all SKUs

Click to View Less SKUs

1351-0201 - * Drill & Tap-Distance: .250 * Max Holding Force: 350 lbs. * Screw Size: 10-32 * Size: 1/2" x .160" hex * Thread Lgth.: 3/8" * Total Throw: .040	$5.35
1351-0202 - * Drill & Tap-Distance: .150 * Max Holding Force: 250 lbs. * Screw Size: 8-32 * Size: 5/16" x .110" hex * Thread Lgth.: 3/8" * Total Throw: .030	$5.05
1351-0203 - * Drill & Tap-Distance: .308 * Max Holding Force: 800 lbs. * Screw Size: 1/4-20 * Size: 1/8" x .190" hex * Thread Lgth.: .470 * Total Throw: .040	$14.35
1351-0204 - * Drill & Tap-Distance: .308 * Max Holding Force: 800 lbs. * Screw Size: 1/4-20 * Size: 5/8" x .190" H hex * Thread Lgth.: 1/2" * Total Throw: .040	$5.35
1351-0205 - * Drill & Tap-Distance: .400 * Max Holding Force: 750 lbs. * Screw Size: 5/16-24 * Size: 13/16" x .190" hex * Thread Lgth.: 1/2" * Total Throw: .040	$5.55
1351-0206 - * Drill & Tap-Distance: .400 * Max Holding Force: 2,000 lbs. * Screw Size: 3/8-16 * Size: 13/16" x .250" hex * Thread Lgth.: 3/4" * Total Throw: .050	$6.15
1351-0208 - * Drill & Tap-Distance: .500 * Max Holding Force: 4,000 lbs. * Screw Size: 1/2-13 * Size: 1" x. 375" hex * Thread Lgth.: 1" * Total Throw: .100	$8.35
1351-0210 - * Drill & Tap-Distance: .590 * Max Holding Force: 6,000 lbs. * Screw Size: 5/8-11 * Size: 1-3/16" x .500" hex * Thread Lgth.: 1-1/4 * Total Throw: .100	$12.70
1351-0213 - * Drill & Tap-Distance: .400 * Max Holding Force: 750 lbs. * Screw Size: 5/16-18 * Size: 3/16" x .190" hex * Thread Lgth.: .460 * Total Throw: .040	$12.20
1351-0255 - * Drill & Tap-Distance: .400 * Max Holding Force: 750 lbs. * Screw Size: 5/16-18 * Size: 13/26" x .190" hex * Thread Lgth.: 1/2" * Total Throw: .040	$5.55

Mitee-Bite's ID Xpansion clamp is the ideal way to hold multiple parts on an inside diameter for multiple machining on a vertical or horizontal machining center. These machinable clamps are produced in 10 sizes and can hold internal diameters from 3/16 to 7 inches. The clamps use a heat treated tapered…

Click to View all SKUs

Click to View Less SKUs

1351-0031 - * A: 0.42 * B: 0.3 * C: 0.24 * D: 0.12 * F: 0.29 * G: 0.16 * H: 2-56 on .540 BHC * I: 2-56 * J: 0.16 * Size: (E) 0.787 dia.	$36.70
1351-0032 - * A: 0.86 * B: 0.63 * C: 0.59 * D: 0.23 * F: 0.49 * G: 0.28 * H: 6-32 on .825 BHC * I: 8-32 * J: 0.3 * Size: (E) 1.17 dia.	$36.70
1351-0033 - * A: 0.98 * B: 0.75 * C: 0.59 * D: 0.23 * F: 0.56 * G: 0.48 * H: 6-32 on .910 BHC * I: 1/4-20 * J: 0.5 * Size: (E) 1.24 dia.	$36.70
1351-0034 - * A: 0.98 * B: 0.75 * C: 0.59 * D: 0.23 * F: 0.79 * G: 0.53 * H: 6-32 on 1.140 BHC * I: 5/16-18 * J: 0.56 * Size: (E) 1.476 dia.	$39.05
1351-0035 - * A: 1.13 * B: 0.88 * C: 0.69 * D: 0.25 * F: 1.06 * G: 0.71 * H: 8-32 on 1.550 BHC * I: 3/8-16 * J: 0.71 * Size: (E) 1.968 dia.	$50.80
1351-0036 - * A: 1.25 * B: 1 * C: 0.81 * D: 0.25 * F: 1.39 * G: 0.9 * H: 8-32 on 1.790 BHC * I: 1/2-13 * J: 0.71 * Size: (E) 2.205 dia.	$62.65
1351-0037 - * A: 1.56 * B: 1.25 * C: 1.06 * D: 0.31 * F: 1.65 * G: 1.15 * H: 10-32 on 2.200 BHC * I: 5/8-11 * J: 0.79 * Size: (E) 2.736 dia.	$80.30
1351-0038 - * A: 1.56 * B: 1.25 * C: 1.06 * D: 0.31 * F: 2.03 * G: 1.15 * H: 10-32 on 2.515 BHC * I: 5/8-11 * J: 0.79 * Size: (E) 2.972 dia.	$88.10
1351-0039 - * A: 1.79 * B: 1.48 * C: 1.27 * D: 0.31 * F: 3.06 * G: 1.15 * H: 1/4-20 on 3.646 BHC * I: 5/8-11 * J: 0.79 * Size: (E) 4.232 dia.	$140.10
1351-0040 - * A: 1.79 * B: 1.48 * C: 1.27 * D: 0.31 * F: 4.06 * G: 1.15 * H: 1/4-20 on 4.648 BHC * I: 5/8-11 * J: 0.79 * Size: (E) 5.232 dia.	$171.95

…original Mitee-Bite T-slot clamp combines a unique cam action clamping element with a T-nut. Makes fast setups possible right on the machine and locks into machine T-slot for low profile. Brass hex follows contour of unusual shaped parts. Approximately one-half turn tightens or loosens clamp. All clamps available…

Related Searches: Clamp | T Nuts | Clamp Set

Click to View all SKUs

Click to View Less SKUs

1351-0420 - * Distance Of Movement: .40 * Key: 1/8" * Max Holding Force: 800 lbs * Screw Size & Pitch: 1/4-20 * Size: 5/8" x 3/16" hex * T-Slot Size: 3/8" * Thread Lgth.: 1/2"	$21.95
1351-0421 - * Distance Of Movement: .040 * Key: 3/16" * Max Holding Force: 750 lbs. * Screw Size & Pitch: 5/16-18 * Size: 13/16" x 3/16" hex * T-Slot Size: 7/16" * Thread Lgth.: 1/2"	$21.95
1351-0422 - * Distance Of Movement: .050 * Key: 3/16" * Max Holding Force: 2,000 lbs. * Screw Size & Pitch: 3/8-16 * Size: 13/16" x 1/4" hex * T-Slot Size: 1/2" * Thread Lgth.: 3/4"	$21.95
1351-0423 - * Distance Of Movement: .050 * Key: 3/16" * Max Holding Force: 2,000 lbs. * Screw Size & Pitch: 3/8-16 * Size: 13/16" x 1/4" hex * T-Slot Size: 9/16" * Thread Lgth.: 3/4"	$21.95
1351-0424 - * Distance Of Movement: .100 * Key: 5/16" * Max Holding Force: 4,000 lbs. * Screw Size & Pitch: 1/2-13 * Size: 1" x 3/8" hex * T-Slot Size: 5/8" * Thread Lgth.: 1"	$21.95
1351-0426 - * Distance Of Movement: .100 * Key: 5/16" * Max Holding Force: 4,000 lbs * Screw Size & Pitch: 1/2-13 * Size: 1" X 3/8" hex * T-Slot Size: 11/16" * Thread Lgth.: 1"	$21.95

Knife Edge clamps can be used instead of original brass hex clamps for clamping rough cut stock, castings and any material that requires a hardened clamping element. Available as complete clamps that include cam screw and knife edge, or knife edge washers only.

Click to View all SKUs

Click to View Less SKUs

1351-0588 - * Size: 1/2-13 thread * Type: Complete clamp	$8.85
1351-0592 - * Size: 5/8-11 thread * Type: Complete clamp	$10.45
1351-2588 - * Size: 1/2-13 thread * Type: Knife edge washer	$14.50
1351-2592 - * Size: 5/8-11 thread * Type: Knife edge washer	$19.25

…fixture clamp provides positive down force while using very little space on a fixture. Workpieces can be clamped in series by using the back surface of a clamp to locate the next work piece. The hardened steel clamping element has both a smooth surface for machined workpieces and a serrated clamping surface…

Related Searches: Mill Clamp

Click to View all SKUs

Click to View Less SKUs

1351-0021 - * A: 1.70 * B: .75 * C: .50 * D: 1.00 * Distance Of Movement: .050 * E: .09 * F: .75 * G: .25 * Screw Size: MB-6 * Size: 3/16" key	$39.10
1351-0022 - * A: 2.12 * B: 1.00 * C: .45 * D: 1.32 * Distance Of Movement: .100 * E: .110 * F: 1.00 * G: .38 * Screw Size: MB-8 * Size: 5/16" key	$44.10
1351-0023 - * A: 2.95 * B: 1.50 * C: .99 * D: 2.00 * Distance Of Movement: .100 * E: .130 * F: 1.50 * G: .50 * Screw Size: MB-10 * Size: 3/8"	$89.60

Provides additional clamping force and improved table grip Tilted clamping element creates a positive downward force Hardened clamping element has both smooth surface for machined workpieces and serrated surface for rougher work Improved locking mechanism secures clamp to machine table T-Slot: 1/2-13…

The cam action fixture clamp from Mitee-Bite Products Co. is made up of two simple components: A hardened steel socket cap screw with an offset head and a hexagonal washer. The low profile make computer programming easier, the small size allows more parts per load, and the simple design keeps cost low…

…mesh; or in stick form. These holding media maintain parallelism on precision parts. Mitee-Grip products are very useful -- machine thin or hard to hold parts or work on five sides of the workpiece without using a clamp. The original paper product is excellent for holding smooth flat parts and maintaining…

Click to View all SKUs

Click to View Less SKUs

1351-0025 - * Size: 12" x 5 ft. paper roll	$34.00
1351-0026 - * Size: 10" x 5 ft. mesh roll	$41.45
1351-0027 - * Size: 1-stick compound	$23.35