…inserted into openings and expanded to size. The size of the hole can then be determined by measuring the parallels externally with a micrometer. They also can be used in pairs as parallels. Parallel sizes are 3/8 to 1/2; 1/2 to 11/16; 11/16 to 15/16; 15/16 to 1-5/16; 1-5/16 to 1-3/4; and 1-3/4 to 2-1/4…

Contains 20 pairs of 1/32-inch thick parallels in fitted wood case Range of 1/2 inch to 1-11/16 inches in 1/16-inch increments Hardened to 50 RC Parallelism, .0001 inch Height, .001 inch accuracy Parallelism in height ±.0001 inch; to size in height, ±.001 inch

Related Searches: Thin Parallels

…and 7/8 inch. Set workpieces to needed height with vise in seconds. Complete set of eight parallels in 1/8-inch increments. The 5/32-inch thickness allows drilling through work near edges without hitting parallels.

Related Searches: Thin Parallels | Parallel Set

Made of high grade alloy steel, hardened and ground. Five holes in each and parallel to make them lighter and for easy setup. Includes box. This four-pair set contains one pair each of the following sizes: 3/16 inch wide by 1 inch high by 6 inches long (hole size, 5/16 inch) 1/2 inch wide by 1-1/2 inches…

Related Searches: Parallel Set

Made of high grade alloy steel, hardened and ground from 1/8-inch stock. Two holes in each parallel. Accuracy of ±.0002 inch; paralellism in height, #177; to .0002 inch. Includes fitted wood case. This set contains one pair each of the following sizes: 1/8 inch wide by 1/2 inch high by 6 inches long…

Related Searches: Parallel Set | Thin Parallels

Made of high grade alloy steel, hardened and ground. Five holes in each and parallel to make them lighter and for easy setup. Includes box. This 1/2-inch eight-pair set contains one pair each of the following sizes: 1/2 inch wide by 7/8 inch high by 6 inches long (hole size, 5/16 inch) 1/2 inch wide…

Adjusts 0 to 45 degrees. All surfaces hardened and ground. Base and front jaw are one-piece construction. Rolls 5 inches center to center. Square and parallel to .0002 inch. Jaw Height: 1.57" Jaw Opening: 5" Jaw Width: 3-7/16"

Related Searches: Sine Vise

Collet blocks make a simple, effective short run jig for machining parallel, round, square or hex shapes as well as cross hole drilling at 60, 90 or 120 degrees. Made of hardened tool steel and precision ground parallel and square. Set consists of one each square and hex blocks, two nut closers and…

Related Searches: Collet

Made of steel, hardened and ground flat, square and parallel. Tapped holes on all models are either 1/4-20 or 3/8-16 to allow the use of standard, readily available clamping accessories.

Related Searches: Angle Plate | Angle

Click to View all SKUs

Click to View Less SKUs

2130-0005 - * Net Weight: 5 lbs. * Size: 3" x 3" x 2-3/4" x 1" x 1/2" * Type: 2 step	$47.00
2130-0010 - * Net Weight: 6 lbs. * Size: 4" x 3" x 3" x 1" * Type: 1 step	$49.00
2130-0015 - * Net Weight: 10 lbs. * Size: 4" x 4" x 4" x 1-1/4" * Type: 1 step	$59.00
2130-0020 - * Net Weight: 14 lbs. * Size: 6" x 4" x 4" x 1-1/4" * Type: 1 step	$69.00
2130-0025 - * Net Weight: 20 lbs. * Size: 4" x 6" x 6" x 1-1/4" * Type: 1 step	$159.00

V-blocks are parallel, square and centered within .0002". Completely hardened and ground tool steel. Sold in pairs. Import.

Related Searches: V Block | V-blocks

Click to View all SKUs

Click to View Less SKUs

1290-0040 - * Capacity: 19/32 * Size: 1-3/8 x 1-3/8 x 1-3/16	$19.00
1290-0045 - * Capacity: 1-3/16 * Size: 2-3/8 x 2-3/8 x 2"	$34.00
1290-0050 - * Capacity: 2-9/16 * Size: 4-1/8 x 4-1/8 x 3-1/16	$69.00