Set packaged in blow molded case and consists of: Eight brass punches, sizes 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32 and 5/16 inch Two steel pin punches, sizes 1/16 and 3/32 inch Two hard plastic punches, sizes 15/64 and 3/8 inch One brass head hammer

Related Searches: Brass Punch | Brass Punch Set | Brass Hammer

Made from a specially selected tool steel. Well proportioned, hardened, highly polished. Knurled finger grip. Punch size is stamped on the head. ISO certified.

Related Searches: Starrett

Click to View all SKUs

Click to View Less SKUs

6525-0005 - * Body Dia: 19/64" * OAL: 4" * Size: 1/16" dia.	$4.80
6525-0010 - * Body Dia: 19/64" * OAL: 4" * Size: 3/32" dia.	$4.80
6525-0015 - * Body Dia: 19/64" * OAL: 4" * Size: 1/8" dia.	$4.80
6525-0020 - * Body Dia: 19/64" * OAL: 4" * Size: 5/32" dia.	$4.80
6525-0025 - * Body Dia: 5/16" * OAL: 4" * Size: 3/16" dia.	$4.80
6525-0030 - * Body Dia: 25/64" * OAL: 4" * Size: 7/32" dia.	$4.80
6525-0035 - * Body Dia: 25/64" * OAL: 4" * Size: 1/4" dia.	$4.80
6525-0040 - * Body Dia: 29/64" * OAL: 4" * Size: 5/16" dia.	$4.80
6525-0045 - * Body Dia: 19/64" - 29/64" * OAL: 4" * Size: (8-piece set) 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" dia.	$46.50

Punches have knurled grips and are well proportioned, hardened and properly tempered. They are designed to withstand hard use and provide a most satisfactory punch for machine shop and motor service work. Adjust the punch to follow long cotter pins and the like into holes without hindrance. Punch diameters…

Click to View all SKUs

Click to View Less SKUs

6525-0050 - * Body Dia: 7/16" * OAL: 8" * Size: 1/8" dia.	$6.00
6525-0055 - * Body Dia: 1/2" * OAL: 8" * Size: 3/16" dia.	$6.00
6525-0060 - * Body Dia: 7/16" * OAL: 8" * Size: 1/4" dia.	$6.00
6525-0065 - * Body Dia: 1/2" * OAL: 8" * Size: 5/16" dia.	$6.00
6525-0070 - * Body Dia: 9/16" * OAL: 8" * Size: 3/8" dia.	$6.00
6525-0075 - * Body Dia: 7/16"-9/16" * OAL: 8" * Size: (Set) 1/8", 3/16", 1/4", 5/16", 3/8" dia.	$37.50

Entirely automatic single hand operation. Adjustable from very light to extra heavy markings. Used for marking, punching, staking, riveting, etc. Replacement points and moving parts are made of hardened alloy steel.

Seven sizes; piercing power up to 14 gauge. Punch accurate precision round holes in steel, aluminum, brass, copper and plastic with one hand. Side gage for depth adjustment. Size: 8-3/8" L x 3-7/8" H Punch Dia: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32" Throat Depth: 2" Net Weight: 3-1/2 lbs. Capacity…

Related Searches: Brass Punch

Easy removal of spring or roll pins. Punches made of high grade S2 tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive…

Related Searches: Roll Pin Punch

Click to View all SKUs

Click to View Less SKUs

6520-0095 - * OAL: 4-1/2" * Size: 3/32" cut	$4.65 $4.25
6520-0100 - * OAL: 4-3/4" * Size: 1/8" cut	$4.65 $4.25
6520-0105 - * OAL: 5" * Size: 5/32" cut	$4.70 $4.30
6520-0110 - * OAL: 5-1/4" * Size: 3/16" cut	$4.85 $4.40
6520-0115 - * OAL: 5-3/4" * Size: 1/4" cut	$4.90 $4.45
6520-0120 - * OAL: 6" * Size: 5/16" cut	$5.80 $5.30
6520-0125 - * OAL: 8" * Size: 3/8" cut	$7.90 $7.20

These punches and nail sets are universally used, but most often by machinists and carpenters. They are well-proportioned for ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All of them feature nicely knurled finger grips for ease of handling. A special…

Related Searches: Center Punch | Starrett Center Punch | Starrett

Click to View all SKUs

Click to View Less SKUs

6525-0100 - * OAL: 7/16" * Size: 4"	$29.50
6525-0105 - * OAL: 5" * Size: 9/16"	$33.00
6525-0110 - * OAL: 5-1/4" * Size: 11/16"	$37.50

…bench punch is for medium power of up to 5 tons. Linear roller bearing cam operation. The steel frame punch provides a deeper throat dimension to punch up to 6-1/2 inches from the edge of a workpiece. Adjustable die shoes permit the proper alignment of close fitting punches and dies to punch light gauge…

Related Searches: Roper Whitney

For use with METALpro 40-ton ironworker (order number 2797-0005).

Related Searches: Metalpro

Click to View all SKUs

Click to View Less SKUs

2797-0025 - * Size: 1/4"	$38.00
2797-0030 - * Size: 9/32"	$38.00
2797-0035 - * Size: 5/16"	$38.00
2797-0040 - * Size: 11/32"	$38.00
2797-0045 - * Size: 3/8"	$38.00
2797-0050 - * Size: 13/32"	$38.00
2797-0055 - * Size: 7/16"	$38.00
2797-0060 - * Size: 15/32"	$38.00
2797-0065 - * Size: 1/2"	$38.00
2797-0070 - * Size: 17/32"	$38.00
2797-0075 - * Size: 9/16"	$38.00
2797-0080 - * Size: 19/32"	$38.00
2797-0085 - * Size: 5/8"	$38.00
2797-0090 - * Size: 21/32"	$38.00
2797-0095 - * Size: 11/16"	$38.00
2797-0100 - * Size: 23/32"	$38.00
2797-0105 - * Size: 3/4"	$38.00
2797-0110 - * Size: 25/32"	$38.00
2797-0115 - * Size: 13/16"	$38.00
2797-0120 - * Size: 27/32"	$38.00
2797-0125 - * Size: 7/8"	$38.00
2797-0130 - * Size: 29/32"	$38.00
2797-0135 - * Size: 15/16"	$38.00
2797-0140 - * Size: 31/32"	$38.00
2797-0145 - * Size: 1"	$38.00

…on the market. Unique locking system enables easy changing of heads. Interchangeable heads allow precise cuts from 1/8 to 1-3/16 inches. Fifteen punches with polypropylene molded case, which is resistant to shock and chemicals. Size: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7…