Fits most 7-inch mini lathes Main post has dovetail type locking Knurling, turning, parting, boring and V-groove holders supplied; very useful for easy tool setup Also includes 3/8-inch capacity drill chuck with mandrel and chuck key, three hex wrenches, parting blade and three pairs of knurls

Related Searches: Mini Lathe | Knurling Tool | Lathe

…approved Quick change tool post set contains: Knurling tool with three sets of knurls 1/2-inch boring bar holder Parting tool holder with three blades 1/2-inch square tool bit holder 1/2-inch square tool bit holder with V-groove 3/8-inch drill chuck with 1/2-inch arbor (fits in boring bar holder) Tool post…

Related Searches: Mini Lathe | Lathe | Tool Post

With quick change interchangeable tooling systems, shops can rapidly switch tools, saving production time and work steps, as well as speeding up parts production. These quality post and holder sets will increase efficiency in lathe setup.

Related Searches: Tool Post | Quick Change Tool Post | Quick Change Lathe

Click to View all SKUs

Click to View Less SKUs

1643-9900 - * Includes: #100 tool post, and holder nos. 101, 102, 104, 107, 110 * Type: Up to 12" swing	$142.00
1643-9910 - * Includes: #200 tool post, and holder nos. 201, 202, 204, 207, 210 * Type: Up to 15" swing	$164.00
1643-9920 - * Includes: #300 tool post, and holder nos. 301, 302, 304, 307, 310 * Type: 13"-18" swing	$219.00
1643-9930 - * Includes: #400 tool post, and holder nos. 401, 402, 404, 407, 410 * Type: 14"-20" swing	$318.00

These holders are best used for holding high speed steel or carbide square shank tools close to the tool post for more rigidity when turning, facing and threading.

Related Searches: Tool Post | Quick Change Tool Post | Tool Holder

Click to View all SKUs

Click to View Less SKUs

1641-0020 - * A: 7/16" * B: 5/8" * C: 3-1/4" * Type: Super Quick Change	$57.75
1641-0025 - * A: 5/8" * B: 3/4" * C: 3-3/4" * Type: Super Quick Change	$79.50
1641-0030 - * A: 9/16" * B: 1" * C: 4-1/2" * Type: Super Quick Change	$99.00
1641-0415 - * A: 3/8" * B: 1/2 * C: 2-3/4" * Type: Super Quick Change	$53.90
1641-0420 - * A: 3/4" * B: 1-1/4" * C: 6" * Type: Super Quick Change	$159.00
1641-0425 - * A: 1" * B: 1-1/2" * C: 7" * Type: Super Quick Change	$246.00
1641-0560 - * A: 3/8" * B: 1/2" * C: 2-3/4" * Type: Quadra	$77.00
1641-0565 - * A: 7/16" * B: 5/8" * C: 3-1/4" * Type: Quadra	$92.00
1641-0570 - * A: 1/2" * B: 3/4" * C: 3-3/4" * Type: Quadra	$114.00
1641-0575 - * A: 9/16" * B: 1" * C: 4-1/2" * Type: Quadra	$127.00
1641-0580 - * A: 3/4" * B: 1-1/4" * C: 6" * Type: Quadra	$210.00
1641-0585 - * A: 1" * B: 1-1/2" * C: 7" * Type: Quadra	$308.00

…providing the best rigidity in metal removal without scarring the boring bar (for extra heavy-duty boring bar). The No. 41 holder has a double height adjustment, which makes the tool reversible for an extended center height range.

Related Searches: Tool Holder

Click to View all SKUs

Click to View Less SKUs

1641-0080 - * A: 7/8" * C: 3-1/4" * D: 1-1/4" * Type: Super Quick Change	$128.30
1641-0085 - * A: 7/8" * C: 3-3/4" * D: 1-1/4" * Type: Super Quick Change	$154.00
1641-0090 - * A: 1-1/4" * C: 4-1/2" * D: 1-1/2" * Type: Super Quick Change	$173.00
1641-0460 - * A: 3/4" * C: 2-3/4" * D: 1" * Type: Super Quick Change	$110.00
1641-0465 - * A: 1-1/2" * C: 6" * D: 2" * Type: Super Quick Change	$264.00
1641-0485 - * A: 2-1/4" * C: 7" * D: 2-1/2" * Type: Super Quick Change	$446.00
1641-0650 - * A: 3/4" * C: 2-3/4" * D: 1" * Type: Quadra	$154.00
1641-0655 - * A: 7/8" * C: 3-1/4" * D: 1-1/4" * Type: Quadra	$167.00
1641-0660 - * A: 7/8" * C: 3-3/4" * D: 1-1/4" * Type: Quadra	$192.00
1641-0665 - * A: 1-1/4" * C: 4-1/2" * D: 1-1/2" * Type: Quadra	$244.00
1641-0670 - * A: 1-1/2" * C: 6" * D: 2" * Type: Quadra	$329.00
1641-0675 - * A: 2-1/4" * C: 7" * D: 2-1/2" * Type: Quadra	$523.00

Dorian's quick change and Quadra tool posts and holders are engineered and built precision, rigidity and simplicity from the tool room lathe to the extra heavy-duty one. Maintenance free and increased productivity up to 500 percent. MT: 4 Depth: 4"

Related Searches: Tool Post | Quick Change Lathe | Quick Change Tool Post

Use taper holder as a drill chuck reamer. Use with a power feed.

Related Searches: Morse Taper

Click to View all SKUs

Click to View Less SKUs

1641-0095 - * A: 7/8" * C: 3-1/8" * Type: Super Quick Change, MT3	$114.00
1641-0100 - * A: 1" * C: 3-3/4" * Type: Super Quick Change, MT4	$148.00
1641-0470 - * A: 1-3/4" * C: 6" * Type: Super Quick Change, MT5	$112.20
1641-0475 - * A: 3/4" * C: 2-3/4" * Type: Super Quick Change, MT2	$83.00
1641-0480 - * A: 1-3/8" * C: 5" * Type: Super Quick Change, MT5	$242.00
1641-0680 - * A: 3/4" * C: 2-3/4" * Type: Quadra, MT2	$109.00
1641-0685 - * A: 7/8" * C: 3-1/8" * Type: Quadra, MT3	$122.00
1641-0690 - * A: 1" * C: 3-3/4" * Type: Quadra, MT4	$173.00
1641-0695 - * A: 1-1/4" * C: 4-1/2" * Type: Quadra, MT4	$180.00
1641-0700 - * A: 1-3/8" * C: 5" * Type: Quadra, MT5	$255.00
1641-0705 - * A: 1-3/4" * C: 6" * Type: Quadra, MT5	$356.00

For turning and facing with high speed or square shank tools, plus V-groove for holding a boring bar.

Related Searches: Boring Bar | Tool Holder

Click to View all SKUs

Click to View Less SKUs

1641-0035 - * A: 7/16" * C: 3-1/4" * D: 5/8" * Type: Super Quick Change	$62.90
1641-0040 - * A: 1/2" * C: 3-3/4" * D: 5/8" * Type: Super Quick Change	$83.50
1641-0045 - * A: 9/16" * C: 4-1/2" * D: 3/4" * Type: Super Quick Change	$105.00
1641-0430 - * A: 3/8" * C: 2-3/4" * D: 1/2" * Type: Super Quick Change	$56.50
1641-0435 - * A: 3/4" * C: 6" * D: 7/8" * Type: Super Quick Change	$170.00
1641-0440 - * A: 1" * C: 7" * D: 1-1/4" * Type: Super Quick Change	$255.00
1641-0590 - * A: 3/8" * C: 2-3/4" * D: 1/2" * Type: Quadra	$82.00
1641-0595 - * A: 7/16" * C: 3-1/4" * D: 5/8" * Type: Quadra	$97.50
1641-0600 - * A: 1/2" * C: 3-3/4" * D: 5/8" * Type: Quadra	$127.00
1641-0605 - * A: 9/16" * C: 4-1/2" * D: 3/4" * Type: Quadra	$141.00
1641-0610 - * A: 3/4" * C: 6" * D: 7/8" * Type: Quadra	$226.00
1641-0615 - * A: 1" * C: 7" * D: 1-1/4" * Type: Quadra	$316.00

For knurling, facing and center drilling. Supplied with two medium diagonal knurls for knurling a diamond pattern.

Related Searches: Knurling Tool | Knurling

Click to View all SKUs

Click to View Less SKUs

1641-0125 - * H: 7/8" * Type: Super Quick Change * W: 3/4" x 1/4" x 1/4"	$122.00
1641-0130 - * H: 1-1/8" * Type: Super Quick Change * W: 3/4" x 3/8" x 1/4"	$136.00
1641-0135 - * H: 1-1/4" * Type: Super Quick Change * W: 3/4" x 3/8" x 1/4"	$154.00
1641-0500 - * H: 3/4" * Type: Super Quick Change * W: 3/4" x 1/4" x 1/4"	$109.00
1641-0510 - * H: 1-5/8" * Type: Super Quick Change * W: 3/4" x 3/8" x 1/4"	$208.00
1641-0800 - * H: 3/4" * Type: Quadra * W: 3/4" x 1/4" x 1/4"	$149.00
1641-0805 - * H: 7/8" * Type: Quadra * W: 3/4" x 1/4" x 1/4"	$157.00
1641-0810 - * H: 1-1/8 * Type: Quadra * W: 3/4" x 3/8" x 1/4"	$174.00
1641-0815 - * H: 1-1/4" * Type: Quadra * W: 3/4" x 3/8" x 1/4"	$195.00
1641-0820 - * H: 1-1/2" * Type: Quadra * W: 3/4" x 3/8" x 1/4"	$208.00
1641-0825 - * H: 1-5/8" * Type: Quadra * W: 3/4" x 3/8" x 1/4"	$263.00

…tool posts on CNC turning centers without extra costs. Quick change tool holder and indexing turret tool post in one, with precise repeatability, speed and rigidity that will make your lathe perform like a CNC machine. Features: Four quick change tool holders locked simultaneously One to four tools…

Related Searches: Quick Change Lathe | Tool Post | Quick Change Tool

Click to View all SKUs

Click to View Less SKUs

1641-0530 - * A: 2-1/2" * B: 2-5/16" * C: 4-1/4" * C.H. Max.: 1-1/2" * C.H. Min.: 1" * D: 1/2" * E: 2-1/8" * Repeatability: .00005" * T-Tool Cap'ty: 1/2" * Type: Up to 12" swing	$650.00
1641-0535 - * A: 3" * B: 2-13/16" * C: 4-7/8" * C.H. Max.: 1-3/4" * C.H. Min.: 1-1/8" * D: 1/2" * E: 2-5/8" * T-Tool Cap'ty: 5/8" * Type: 13"-15" swing	$730.00
1641-0540 - * A: 3-1/2" * B: 3-1/4" * C: 5-5/8" * C.H. Max.: 2-1/8" * C.H. Min.: 1-3/8" * D: 5/8" * E: 3" * T-Tool Cap'ty: 3/4" * Type: 14"-17" swing	$880.00
1641-0545 - * A: 4" * B: 3-3/4" * C: 7" * C.H. Max.: 2-1/2" * C.H. Min.: 1-11/16" * D: 3/4" * E: 3-1/4" * T-Tool Cap'ty: 1" * Type: 16"-20" swing	$1,050.00
1641-0550 - * A: 5" * B: 5" * C: 8-3/8" * C.H. Max.: 3-1/2" * C.H. Min.: 2" * D: 1" * E: 4-3/8" * T-Tool Cap'ty: 1-1/4" * Type: 17"-32" swing	$1,528.00
1641-0555 - * A: 6" * B: 5-1/2" * C: 9-1/2" * C.H. Max.: 4-1/4" * C.H. Min.: 3" * D: 1-1/8" * E: 5-1/4" * T-Tool Cap'ty: 1-1/2" * Type: 25"-XHD swing	$2,175.00