…classic cove profiles with the Freud cove bit, which has a shear angle that slices wood similarly to the way a craftsman uses a hand plane Cuts all composition materials, plywoods, hardwoods and softwoods Use on hand-held and table-mounted portable routers Carbide Height: 5/8" Radius: 1/2" Bearing:…

Set contains carbide-tipped bits with 1/2-inch shank and two high speed steel bits with 1/4-inch shank. Includes wood case and hex key. The 1/2-inch shank sizes are as follows: One each 1/4-, 1/2- and 3/4-inch two-flute straight bits One 1/2-inch two-flute flush trim bit with ball bearing guide One 3…

…edges and create decorative beads For beading work, equip the bits with a Freud 62-102 bearing and 62-311 step washer Cuts all composition materials, plywoods, hardwoods and softwoods Use on hand-held and table-mounted portable routers

Click to View all SKUs

Click to View Less SKUs

0812-0605 - * Carbide Height: 1/2" * Diameter: 3/4" * OAL: 2-3/16" * Radius: 1/8" * Shank Size: 1/4"	$28.15
0812-0610 - * Carbide Height: 1/2" * Diameter: 7/8" * OAL: 2-3/16" * Radius: 3/16" * Shank Size: 1/4"	$28.65
0812-0615 - * Carbide Height: 1/2" * Diameter: 1" * OAL: 2-3/16" * Radius: 1/4" * Shank Size: 1/4"	$29.70
0812-0620 - * Carbide Height: 1/2" * Diameter: 1-1/8" * OAL: 2-3/16" * Radius: 5/16" * Shank Size: 1/4"	$32.10
0812-0625 - * Carbide Height: 5/8" * Diameter: 1-1/4" * OAL: 2-3/16" * Radius: 3/8" * Shank Size: 1/4"	$32.10
0812-0630 - * Carbide Height: 3/4" * Diameter: 1-1/2" * OAL: 2-1/2" * Radius: 1/2" * Shank Size: 1/4"	$34.10
0812-0635 - * Carbide Height: 3/4" * Diameter: 1-1/2" * OAL: 2-3/4" * Radius: 1/2" * Shank Size: 1/2"	$34.25

…changed by raising or lowering the spindle. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table-mounted routers.

Click to View all SKUs

Click to View Less SKUs

0812-0650 - * Bearing: 3/8" * Carbide Height: 1/2" * Diameter: 1-1/16" * OAL: 2-3/16" * Radius: 5/32"	$33.35
0812-0655 - * Bearing: 3/8" * Carbide Height: 23/32" * Diameter: 1-3/8" * OAL: 2-3/8" * Radius: 1/4"	$37.10

Most bits are carbide tipped except laminate styles, which are solid carbide. The set includes storage case and contains the following: 1-1/4 inch rounding-over bit (ball-bearing guide, two-flute, 1-1/4 inches wide by 5/8 inch deep by 13/32-inch radius) Roman ogee bit (ball bearing guide, two-flute,…

…nail or screw shank Cuts all composition materials, plywoods, hardwoods and softwoods. Use on CNC and other automatic routers, as well as hand-held and table-mounted portable routers Diameter: 25/64" Carbide Height: 7/16" Minor Height: 1/4" Min Dia: 3/16" OAL: 1-5/8"

…countertops and do pattern work The bits to rely on for a smooth, burn-free cut -- two flutes provide faster cutting, and three flutes yield a superior finish. Cut all composition materials, plywoods, hardwoods and softwoods Use on portable or table-mounted routers

Click to View all SKUs

Click to View Less SKUs

0812-0675 - * Bearing: 3/8" * Carbide Height: 1" * Diameter: 3/8" * Flutes: 2 * OAL: 2-15/16" * Shank Size: 1/4"	$15.75
0812-0680 - * Bearing: 1/2" * Carbide Height: 1" * Diameter: 1/2" * Flutes: 2 * OAL: 2-13/16" * Shank Size: 1/4"	$15.75
0812-0685 - * Bearing: 1/2" * Carbide Height: 1/2" * Diameter: 1/2" * Flutes: 2 * OAL: 2-1/8" * Shank Size: 1/4"	$16.50
0812-0690 - * Bearing: 1/2" * Carbide Height: 1" * Diameter: 1/2" * Flutes: 2 * OAL: 3-1/4" * Shank Size: 1/2"	$17.80
0812-0695 - * Bearing: 1/2" * Carbide Height: 1" * Diameter: 1/2" * Flutes: 3 * OAL: 2-13/16" * Shank Size: 1/4"	$24.70

Cut smoother than other straight bits because of precise shear and hook angle. End of bit relief allows for fast plunging. Cuts all composition materials, plywood and hard and soft woods. Use on CNC and other automatic routers.

Click to View all SKUs

Click to View Less SKUs

0812-0500 - * Carbide Height: 3/8" * Diameter: 1/8" * OAL: 1-3/4" * Shank Size: 1/4"	$13.30
0812-0505 - * Carbide Height: 1/2" * Diameter: 3/16" * OAL: 2" * Shank Size: 1/4"	$13.90
0812-0510 - * Carbide Height: 3/4" * Diameter: 1/4" * OAL: 1-1/4" * Shank Size: 1/4"	$14.35
0812-0515 - * Carbide Height: 1" * Diameter: 1/4" * OAL: 2-1/2" * Shank Size: 1/4"	$14.60
0812-0520 - * Carbide Height: 1" * Diameter: 5/16" * OAL: 2-1/2" * Shank Size: 1/4"	$14.35
0812-0525 - * Carbide Height: 1" * Diameter: 3/8" * OAL: 2-1/2" * Shank Size: 1/4"	$15.10
0812-0530 - * Carbide Height: 1" * Diameter: 1/2" * OAL: 2-1/8" * Shank Size: 1/4"	$15.80
0812-0535 - * Carbide Height: 3/4" * Diameter: 5/8" * OAL: 2-1/8" * Shank Size: 1/4"	$16.35
0812-0540 - * Carbide Height: 3/4" * Diameter: 3/4" * OAL: 2-1/8" * Shank Size: 1/4"	$18.25
0812-0545 - * Carbide Height: 1" * Diameter: 1/2" * OAL: 2-5/8" * Shank Size: 1/2"	$16.35
0812-0550 - * Carbide Height: 1" * Diameter: 5/8" * OAL: 2-1/2" * Shank Size: 1/2"	$20.35

…chip loading. They cut all composition materials, plywoods, hardwoods and softwoods. Use on CNC and other automatic routers, as well as hand-held and table-mounted portable routers.

Click to View all SKUs

Click to View Less SKUs

0812-0555 - * Carbide Height: 1/2" * Diameter: 1/2" * OAL: 2" * Shank Size: 1/4"	$16.70
0812-0560 - * Carbide Height: 1/2" * Diameter: 3/4" * OAL: 2" * Shank Size: 1/4"	$18.60

…micro-grain carbide extends cutting life, and the self-piloting feature eliminates expense and upkeep of a ball bearing assembly. Use on portable routers and laminate trimmers for trimming plastic laminate ISO certified Carbide Height: 3/8" OAL: 1-1/2" Diameter: 1/4" Shank: 1/4"