WT header

By Origin:

  • USA  (7)
  • By Price Range:

  • $10 - $25  (1)
  • $50 - $100  (1)
  • $100 - $250  (3)
  • $500 - $1000  (2)
  • Over $1000  (4)
  • Need Help? Give us a call or click for live chat.
    1-800-521-3420 Store Hours
    Live Chat
    Sine Plate
    Show:
    Order By:
    View: Grid | List
    Suburban Tool Sine Plate
    Minute angle step 0.2 is built into gage block roll, eliminating step in base plate. Two hardened and ground side rails and one locking strap included. Strap always remains below top surface. Large hinge pins for extra strength. Notes on Order No. 1701-0025: This item's weight exceeds the UPS…
    $530.10 - $1561.70
    Suburban SineSet Magnetic Sine Plate Chuck
    …SineSet sine or compound sine plate of same size and series to form regular magnetic or magnetic compound sine plate. Also use alone as parallel chuck. Made with ceramic permanent magnets for superior holding power. Lubricated and sealed against dirt and liquids. One-piece laminated top plate with…
    $1207.95 - $2339.30
    RDX 6
    Precision ground steel with hardened and ground rolls accurate to .0002 inch. With 0- to 60-degree settings possible. Includes support arms.
    $169.00
    item # 2121-0005
    Suburban Bolt-On Vacuum Sine Plate Chuck
    Provides excellent means to hold non-magnetic workpieces for light machining or grinding. Ideal for Suburban sine system. Three holes for mounting vacuum gage, relief valve and hose. Back and end rails for positive workpiece location. Includes gage and valve.
    $690.80
    item # 1701-0470
    Suburban Tool Magnetic Compound Sine Plate
    …compound sine plate hardened to Rc 58-62. Gage block roll has two 0.200 minute steps for setting small angles with standard gage block sets. Tolerance of .0002 and .0003 in squareness, parallelism and roll center distance. Chuck is part of Suburban's SineSet system and can be removed so it and plate
    $2818.80
    item # 1701-0150
    Suburban Tool Master-Grind Index Fixture
    …vertical V-block mounting and 72-position index plate for hard index every 5 degrees. Two heavy duty 4-inch diameter tapered roller bearings in spindle. Extra large V-block capacity and built-in sine bar for setting angles between hard index locations. Sine set compatibleInclides fitted wooden case.
    $2245.00
    item # 1701-0923
    Suburban Tool Magnetic Sine Plate
    …Models MSP-126-S1 and S2 are part of Suburban's SineSet system. Chuck can be removed, so sine plate and magnetic chuck can be used separately. Products with same part number suffix also can bolt directly to plate. Model MSP-363-FP does not have removable chuck. Center distance of rolls is fine pole,…
    $1222.35 - $2755.35
    RDX 5
    Precision ground steel with hardened and ground rolls accurate to .0002. Settings of 0 to 60 degrees. Includes support arms.
    $109.00
    item # 2121-0006
    RDX Universal Angle Block Set
    No sine vise, sine plate, angle vise, angle chart or block gage needed. Consists of 10-, 15- and 30-degree V-blocks; 1-, 2-, 3-, 4- and 5-inch angle plates; and fitted case. Hardened to Rc 45-50, with all ground finish.
    $69.00
    item # 1291-0082
    RDX 5
    Bar and rolls made of quality tool steel, hardened and ground for extreme accuracy. Bar bottom extends past bottom of rolls. When tool is moved over surface plate, all wear is eliminated from rolls.
    $24.00
    item # 1291-0066
    Spindle Square Tramming Tool
    plate, install Spindle Square on the mill's spindle, bring spindle down to the table, and adjust the head until both indicators have the same reading. It's that easy! Once you use Spindle Square, you'll never want to square machine heads without it again! Also can be used to square angles with sine
    $179.00 - $239.00
    Expand your search to see results that contain some of your words
    Showing item 1 - 11 of 11 items found
    Site Search by  Site Search powered by SLI Systems