This quick-change 2MT tailstock unit is supplied with three heads; 1/2-inch capacity chuck with key; live center; 1-inch outside diameter die holder; one 2-3MT drill sleeve; and two drill drifts. Chuck Size: 1/2" w/key Taper: 2MT

Related Searches: Die Holder | Quick Change Lathe | Lathe Centers

For use with rotary tables, super spacers and other machining applications.

Related Searches: Rotary Table | Angle Plate

Click to View all SKUs

Click to View Less SKUs

1990-0070 - * Size: 6" * Type: Non-adjustable	$119.00
1990-0075 - * Size: 8" * Type: Adjustable	$129.00
1990-0080 - * Size: 12" * Type: Adjustable	$139.00

…drill chuck. Spindle: D1-4 Net Weight: 850 lbs. MT: 3MT Screw Dia: 7/8" (8 TPI) Spindle Speed(s): 70-1,400 rpm Spindle Taper: 5MT Saddle: 33" travel Tailstock: 4" spindle travel Swing: 12" over bed; 7" over cross slide Thread: 40 different ways (4-112 TPI); metric, 29 kinds, 2-4.5 Compound Travel: 3-1/4…

Related Searches: Lathe | Live Center | Drill Rod | 4 Jaw Chuck

Cut threads on any lathe fitted with a Morse taper tailstock Improves thread quality with fewer part rejections over hand-held method Four to five times faster than threading with a single point tool Reduces chance for operator injury Heads or shanks available separately; see description below for item…

Related Searches: Lathe Die Holder | Lathe Tools | Die Holder

Click to View all SKUs

Click to View Less SKUs

0513-0050 - * Fits Die OD: 1" * Fits Head Number: ---- * For MT: 2 * Head Number: FDH1-2 * Max Thread Length: 2-3/8" * Shank: ---- * Type: Head	$56.50
0513-0055 - * Fits Die OD: 1" * Fits Head Number: ---- * For MT: 3, 4 * Head Number: FDH1-34 * Max Thread Length: 3" * Shank: ---- * Type: Head	$67.00
0513-0060 - * Fits Die OD: 1-1/2" * Fits Head Number: ---- * For MT: 3, 4 * Head Number: FDH15-34 * Max Thread Length: 3" * Shank: ---- * Type: Head	$67.00
0513-0065 - * Fits Die OD: 2" * Fits Head Number: ---- * For MT: 3, 4 * Head Number: FDH2-34 * Max Thread Length: 3" * Shank: ---- * Type: Head	$74.00
0513-0070 - * Fits Head Number: FDH1-2 * For MT: 2 * Shank: FDHS-2T * Type: Shank	$55.50
0513-0075 - * Fits Head Number: FDH1-34, 15-34, 2-34 * For MT: 3 * Shank: FDHS-3T * Type: Shank	$74.00
0513-0080 - * Fits Head Number: FDH1-34, 15-34, 2-34 * For MT: 4 * Shank: FDHS-4T * Type: Shank	$86.25

WT's universal dividing head set includes head, adjustable tailstock, driving assembly, gear arbor, threaded backplate for three- or four-jaw chuck; and three dividing plates. Hardened and ground spindle is rigidly held in a tapered seat by draw-in nut. The phosphor-bronze worm gear is cut helically…

Related Searches: Dividing Head | Dividers | Angle Plate

Click to View all SKUs

Click to View Less SKUs

1994-0005 - * Center Height: 3-15/16" * Concentricity: .0006" center; .0004" inside taper at spindle nose; .0012" at arbor (8") * Spindle Hole: .709 * Spindle Taper: B&S no. 7 * Swing: 7-1/8" * Type: Semi-universal	$295.00
1994-0010 - * Center Height: 5-3/64" * Concentricity: .0006" center; .0004" inside taper at spindle nose; .0012" at arbor (8") * Spindle Hole: .787 * Spindle Taper: B&S no. 9 * Swing: 10-3/32" * Type: Semi-universal	$399.00
1994-0015 - * Center Height: 5-15/64" * Concentricity: .0006" center; .0004" inside taper at spindle nose; .0012" at arbor (8") * Spindle Hole: .985 * Spindle Taper: B&S No. 10 * Swing: 10-15/32" * Type: Universal	$795.00

…allows for many aftermarket accessories Reversing switch is included for added versatility Backlash adjustments are provided throughout the carriage Tailstock can be adjusted for taper cuts Quick-change gearbox provides a wide range of inch and metric threads Standard equipment: 7-inch four-jaw and 4-inch…

Related Searches: 9 X 20 Lathe | Lathe | Lathe Back Plates | Jet Lathe

…comfort Live center has a removable pin for boring through stock Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools Hollow tailstock allows for long hole boring for lamps and other vessels Convenient work light for better lighting right on the workpiece…

Related Searches: Wood Lathe | Jet Lathe | 9 X 20 Lathe | Lathe Centers

With six 5/8-inch diameter holes with Allen set screws. Converts a bench lathe into a screw machine or a turret lathe. Indexes with tool perfectly centered.

Related Searches: Lathe Tools | Lathe Centers | Lathe Accessories

Click to View all SKUs

Click to View Less SKUs

2004-0005 - * Hole Size: 5/8" * Size: 2MT	$64.00
2004-0010 - * Hole Size: 5/8" * Size: 3MT	$64.00

…comfort Built-in spindle locks for easy removal of faceplates and chucks Cam-lock mechanisms for adjustments of headstock, tailstock and tool rest base without using tools Hollow tailstock for performing long-hole boring for lamps and other vessels Special cast-in webbings in legs accept 2-by-4's or a 2-by…

Related Searches: Jet Lathe | Wood Lathe

…cylindrical roller bearing angular contact ball bearing Four-way tool post type with 4-3/4 inch maximum compound slide travel Cross Slide Travel: 9" max. Tailstock: 5" spindle travel; 2-3/4" dia. Dimensions: 100" L x 45" W x 47" H Motor: 7-1/2 hp, 230V, 3 ph., 60 Hz Net Weight: 4,950 lbs. Swing Through Gap: 12…

Related Searches: Lathe