…Separate stands, guides or similar devices are not needed. The tap follows the correct lead, assuring true alignment. Accurate threads are produced because tapper makes it easy to hand tap a hole in the same alignment as the drilled one. Thread quality is improved while reducing tap breakage. It is…

…Aligner automatically squares up tap or reamer with surface* Holds tap and reamer true to prevent breakage* 3/8-inch dia. x 1/2-inch stem for chucking alignment* Center drill on stem for floating center* Slip-fit T-wrench made of steel and finish ground all over* Guide base has two 120-degree Vs,…

Non-marring. Use to start taps straight. Can be machined. Bright orange polyethylene. Eight holes.

Start every tap straight with this tool. Hardened shank and tension pin. Adjustable tension spring. Reversible tension pin for male and female hole centering.

Includes lap guide, precision ground work table, tap spindle wrench and tap adapters #0, #6, #8, #10 and #12, and 1/4 and 5/16 inch. Uses large spiral taps (not included).Large ribbed diameter for sensitive tapping (#0/80). Convenient crossbar handle for larger tapping (5/16 inch). Size and weight…

Takes spiral point taps (not included). Taps through open base and can be used vertically, horizontally or inverted. Assures straight perpendicular tapped holes. Equipped with tap guide, ground work table, tap spindle wrench, and nine steel tap adapters in sizes 8-32, 10-24, 1/4, 5/16, 3/8, 7/16,…

Provides sensitive feed for hand tapping small holes on milling machines, drill presses and lathes. Starts every hole straight and prevents tap breakage.

Includes lap guide, precision ground work table, tap, spindle wrench and tap adapters #8 and #10 and 1/4, 5/16, 7/15, 1/2, 5/8 and 3/4 inch. Spiral point taps are not included. Tap spindle wrench is removable for lathe use with dead center. Overall size and weight make this unit quite portable.…

…execution, the center's body should be gripped in a drill chuck or collet, while the hardened point is inserted into the middle of the tapping handle. The stroke of the center will follow the tap, assuring straight and accurate hand tapped threads. One universal size for all tapping applications.