Gray crackle finish, chrome clad screw and handle and machined gibs. Vise can be adjusted and locked anywhere between 0 and 90 degrees horizontal and vertical. Precision graduation for accurate adjustment. Removable hardened jaws. Six T-slots for easy mounting.

Related Searches: Vise | Drill Press Vise

Click to View all SKUs

Click to View Less SKUs

2108-0040 - * Jaw Depth: 1-1/4" * Jaw Opening: 3-1/8" * Jaw Width: 3-1/4" * Net Weight: 9.8 lbs. * OAL: 7-1/4"	$19.95
2108-0045 - * Jaw Depth: 1-1/2" * Jaw Opening: 4-1/4" * Jaw Width: 4-1/4" * Net Weight: 14 lbs. * OAL: 8-1/4"	$29.00

…shaping and jig boring. Vise bodies are constructed of close grained, high tensile, seasoned alloy castings Economically designed all-steel handle with spring loaded ball attachment. Durable polychromatic finish Hardened and ground jaw plates Hardness of jaws, 54 to 58 HRC No jaw tilt Accurately indexed for…

Related Searches: Milling Machine Vise | Milling Vise | Vise

Click to View all SKUs

Click to View Less SKUs

3016-0920 - * Jaw Depth: 1" * Jaw Opening: 2" * Jaw Width: 2"	$215.00
3016-0925 - * Jaw Depth: 1-5/16" * Jaw Opening: 3" * Jaw Width: 3"	$429.00
3016-0930 - * Jaw Depth: 1-9/16" * Jaw Opening: 4" * Jaw Width: 4"	$554.00

…boring and shaping jobs. Vise bodies are constructed of close grained, high tensile, seasoned alloy castings All ground surfaces made to close tolerances Economically designed all-steel handle with spring-loaded ball attachment Hardened and ground jaw plates; no jaw tilt Hardness of jaws 54-58 HRC…

Related Searches: Vise | Angle Vise | Machine Vise

Click to View all SKUs

Click to View Less SKUs

3016-0935 - * Jaw Depth: 1" * Jaw Opening: 2" * Jaw Width: 2"	$169.00
3016-0940 - * Jaw Depth: 1-15/16" * Jaw Opening: 3" * Jaw Width: 3"	$270.00
3016-0945 - * Jaw Depth: 1-1/2" * Jaw Opening: 4" * Jaw Width: 4"	$349.50
3016-0950 - * Jaw Depth: 1-3/4" * Jaw Opening: 5" * Jaw Width: 5"	$499.00
3016-0955 - * Jaw Depth: 1-3/4" * Jaw Opening: 6" * Jaw Width: 6"	$630.00

Swivels are fully ground. Hardened and ground jaw, which is also grooved to hold rounds. With 90-degree tilt and 360-degree swivel. Base has 5/8-inch keyway and two bolt holes for mounting. Net Weight: 10 lbs. Jaw Opening: 2-1/2"

Related Searches: Drill Press Vise

Clamping bolt centers, 9-3/8 inches. Positive locking; includes handle. Jaw Opening: 3-1/8" Jaw Width: 4" Jaw Depth: 1-1/2" Capacity: 90° tilt

Related Searches: Vise

Surfaces are hardened and ground, square and parallel to .0004 inch. Vise tilts a full 60 degrees, and the angle can be set to the desired degree with four knurled knobs. Three sets of thread holes make this vise rigid at 0, 45 and 60 degrees. Slots of 1/2 inch in the front and the back of the base for…

Related Searches: Vise | Sine Vise

Click to View all SKUs

Click to View Less SKUs

2124-0050 - * Base: 2-3/8" W x 6-3/4" L * Jaw Depth: 7/8" * Jaw Width: 2-3/8" * Max Jaw Opening: 2-1/16" * Net Weight: 8 lbs.	$99.00
2124-0055 - * Base: 3-1/8" W x 8-1/4" L * Jaw Depth: 1-3/16" * Jaw Width: 3-1/8" * Max Jaw Opening: 2-3/4" * Net Weight: 14 lbs.	$129.00

Swivels 360 degrees. Base graduated by 1degree and tilts up to 90 degrees. Jaw Opening: 5" Jaw Depth: 2" Jaw Width: 6"

Related Searches: Vise

Swivel base and lock-down jaws Eliminates tilt and takes up wear Coolant trough Removable hinged handle for fast locking Excellent clamping pressure eliminates hammering

Related Searches: Milling Machine Vise | Milling Vise | Vise | Mill Clamp

Click to View all SKUs

Click to View Less SKUs

2109-0005 - * Jaw Opening: 4-1/8" * Jaw Width: 4"	$99.00
2109-0010 - * Jaw Opening: 5-1/2" * Jaw Width: 6"	$139.00

The Grip-Master SV Series is for general vise and fixture use, and these vises are identifiable by their black knobs. A press on the locking lever actuates the eccentric crank, which tilts the locking ring. It grips the entire circumference of the center bar, forcibly moving the jaw forward against the…

Related Searches: Back Plate

Click to View all SKUs

Click to View Less SKUs

2103-0005 - * Height: 2-3/4" * Jaw Depth: 1-1/4" (to bars) * Jaw Opening: 3" * Jaw Width: 3" * OAL: 8-15/16"	$142.78
2103-0020 - * Height: 3-3/4" * Jaw Depth: 1-13/16" (to bars) * Jaw Opening: 6-3/16" * Jaw Width: 6" * OAL: 14-11/16"	$264.99
2103-0035 - * Height: 4-7/16" * Jaw Depth: 2" (to bars) * Jaw Opening: 8-3/16" * Jaw Width: 8" * OAL: 17-7/8"	$375.10

This machine is designed for milling, drilling, reaming and counterboring. With rigid dovetail column and adjustable tilting headstock. Includes 3-inch face cutter, 3-inch angle vise and wrench. Table Size: 32-1/4" L x 9-1/2" W Spindle Distance: Bet. nose & table, 18-3/4" Tap Capacity: 1/2" max. Spindle…

Related Searches: Milling Machine | Mill Table | Mill | Mill Drill