CENTER IT is a tool for drilling pipe and other round objects. The V-block bolts to the drill press table and enables the drilling of round pieces, parallel and centered. The grooves on the outer sides eliminate slippage. To use, simply place CENTER IT on the drill press table, run the bit down…

Related Searches: Center It | V Block | Center | Center Drill

Chrome steel, hardened and ground Accurate enough for layout and surface plate use Square, parallel and concentric within ±.0001 inch Models 475-015 and 475-020 can be set up on side or bottom angles 90-degree V-angles

Related Searches: V Block | Angle Block | Angle Plate | V-blocks

Click to View all SKUs

Click to View Less SKUs

1290-0003 - * Diameter: 3/4" max. bar dia. * Size: 1-1/4" x 1-1/4" x 1-5/8"	$19.00
1290-0005 - * Diameter: 1" max. bar dia. * Size: 1-3/8" x 1-5/8" x 1-3/4"	$29.00
1290-0010 - * Diameter: 1.5" max. bar dia. * Size: 1-5/8" x 1-3/4" x 2-3/4"	$39.00
1290-0015 - * Diameter: 1.5" max. bar dia. * Size: 1-3/4" x 2-1/2" x 2-3/4"	$89.00
1290-0020 - * Diameter: 2-1/8 max. bar dia. * Size: 2-3/4" x 3-1/2" x 4-7/8"	$79.00

V-blocks are parallel, square and centered within .0002". Completely hardened and ground tool steel. Sold in pairs. Import.

Related Searches: V Block | V-blocks | Parallels

Click to View all SKUs

Click to View Less SKUs

1290-0040 - * Capacity: 19/32 * Size: 1-3/8 x 1-3/8 x 1-3/16	$19.00
1290-0045 - * Capacity: 1-3/16 * Size: 2-3/8 x 2-3/8 x 2"	$34.00
1290-0050 - * Capacity: 2-9/16 * Size: 4-1/8 x 4-1/8 x 3-1/16	$69.00

For use with all series and models of Heinrich Grip-Master brand vises. Hardened and ground. Ensures a firm grip on round stock.

Click to View all SKUs

Click to View Less SKUs

2103-0015 - * Capacity: 9/64"-1" * Size: 2.675" W x .75" D x 1.240" H	$38.72
2103-0030 - * Capacity: 9/64" - 1-1/16" * Size: 3.375" W x .75" D x 1.24" H	$58.08
2103-0045 - * Capacity: 5/16" - 1-5/8" * Size: 5" W x 1.25" D x 2" H	$72.60
2103-0060 - * Capacity: 3/8" - 1-13/16" * Size: 7" W x 1.25" D x 2" H	$44.77

V-blocks transfer magnetism from permanent magnetic chucks. Blocks have two 90-degree V-slots. The steel is selected for high magnetic transfer and is cast integrally with aluminum.

Click to View all SKUs

Click to View Less SKUs

1290-0055 - * Includes: Single V-block * Size: 1-7/8" H x 2-3/8" W x 4-5/16" L	$19.00
1970-0035 - * Includes: Pair of V-blocks * Size: 1-7/8" H x 2-3/8" W x 2" L	$27.00

Fits Starrett® V-block Model 568A. Capacity: 1-7/16 square, 2" round

Ground & hardened for parallelism & squareness. More versatile than other v-blocks. Can be used on either side, end & base. Threaded holes on each side and base attach to angle plates. Block is 1-7/8"square; base length is 1-19/32" and capacity is 1-5/16".

Related Searches: Angle Block

Starrett magnetic V-blocks are designed for versatility and accuracy. All working surfaces are precision ground with typical Starrett accuracy to provide convenient setups for inspection and light machining. Two precision vees will hold round stock sizes from 1/4 inch to 1-3/4 inch diameters. A…

Half round and irregular shapes for scribing, grinding, measuring and machining. Powerful holding force. Precision ground finish for use as an inspection device. Fixed on/off switch. Width: 2" V-width Dimensions: 3-3/4" H x 2-3/4" W x 4" L

For small or large work Clamps do not project; block can be used on base, ends or sides Permits grinding ends of work square with sides Block holds round work up to 2 inches in diameter and square work up to 1-7/16 inches (or 1-9/16 inches square with screw at top) Features tapped holes (3/8-16)…