Size slots are sizes 0 to 36, and each is numbered with its decimal equivalent on the back. These tools are made of heavy gauge steel, hardened and tempered, with satin chrome finish. Gage size is 3-5/16 inch diameter by no. 10 thickness.

Click to View all SKUs

Click to View Less SKUs

1289-0005 - * Type: Wire, sheet, plate sizes, nonferrous metals	$17.50
1289-0010 - * Type: Sheet steel & plate iron	$17.50

This precision matched set gives your shop a complete set of wire gauge sizes, packed in a handy indexed stand. Punches made from the finest tool steel, carefully heat treated. Induction hardened and tempered to RC 61-63 approximately 1-1/2 inches from point. Tolerance of ±.0005. Length: 4-7/8" Pieces…

Related Searches: Transfer Punch Set

The 6-inch models are good for general purpose grinding (with the 36-grit wheel). Useful for wire brisking. Removes scale and rust and deburrs small parts. Wheel guards are non-exhaust type. The 7-inch models also for general purpose grinding. Used for shaping objects by removing material and to sharpen…

Related Searches: Grinder | Buffer | Tool Grinder | Baldor Buffers

Click to View all SKUs

Click to View Less SKUs

3031-0190 - * Includes: 6" x 3/4" x 1/2" 36-grit wheel; .012-gauge wire brush * Motor: 1/3 hp, 1 ph., 115V, 60 Hz * Net Weight: 28 lbs. * Type: Pressed steel tool rests; switch, 3-conductor cord & plug * Warranty: 3 years	$264.10
3031-0195 - * Includes: 6" x 3/4" x 1/2" 36-grit wheel; .012-gauge wire brush * Motor: 1/3 hp, 1 ph., 115V, 60 Hz * Net Weight: 38 lbs. * Type: Pressed steel tool rests; switch, 3-conductor cord & plug * Warranty: 3 years	$327.30
3031-0200 - * Includes: 6" x 3/4" x 1/2" 36-grit wheel; .012-gauge wire brush * Motor: 1/3 hp, 1 ph., 115V, 60 Hz * Net Weight: 49 lbs. * Type: Cast iron tool rests; switch, 3-conductor cord & plug * Warranty: 3 years	$369.70
3031-0205 - * Includes: 7" x 1" x 5/8" wheel; wire brush * Motor: 1/2 hp, 1 ph., 115V, 60 Hz * Net Weight: 49 lbs. * Type: Pressed steel tool rests; switch, 3-conductor cord & plug; non-exhaust guards * Warranty: 3 years	$390.50
3031-0210 - * Includes: 7" x 1" x 5/8" wheel; wire brush * Motor: 1/2 hp, 1 ph., 115V, 60 Hz * Net Weight: 67 lbs. * Type: Pressed steel tool rests; switch, 3-conductor cord & plug; exhaust type guards * Warranty: 3 years	$460.25
3031-0215 - * Includes: 7" x 1" x 5/8" wheel; wire brush * Motor: 1/2 hp, 1 ph., 115V/230V, 60 Hz * Net Weight: 69 lbs. * Type: Cast iron tool rests; switch, 3-conductor cord & plug; exhaust type guards * Warranty: 3 years	$503.65
3031-0220 - * Includes: 8" x 1" x 3/4" 36-grit wheel; wire brush * Motor: 3/4 hp, 1 ph., 115V/230V, 60 Hz * Net Weight: 93 lbs. * Type: Cast iron tool rests; switch, 3-conductor cord & plug * Warranty: 3 years	$811.10
3031-0225 - * Includes: 8" x 1" x 3/4" 36-grit wheel; wire brush * Motor: 3/4 hp, 3 ph., 208-230V/460V, 60 Hz * Net Weight: 93 lbs. * Type: Cast iron tool rests; no switch, cord or plug * Warranty: 3 years	$785.65

Features wire and bolt cutters and ignition terminal wrench. Plastic covered handles. Strips and crimps. Range: 10-22 gauge wire Size: For 4-40, 5-40, 6-32, 10-32, 10-24 bolts

Holds the wire and strips off the insulation at the same time. For use with 8- to 22-gauge wire. Insulated handles.

Welds from 24 gauge up to 1/4 inch with solid wire and DC reverse polarity. Top quality Benzel torch. Solid state contactor for fast triggering while stitch welding. No contact to wear out Easy slide loading of 4- to 12-inch wire spools 100 percent duty on low heat, which tapers to 15 percent of maximum…

…carry work through as handle is turned. Adjustable rear roller curves sheet in desired radius Rollers have grooves in the end that permit rolling wire, as well as sheet Designed for bench or table mount Rollers are fully adjustable for any diameter roll 2 inches and up

Related Searches: Slip Roll

Click to View all SKUs

Click to View Less SKUs

2805-0005 - * Capacity: 22 gauge * Net Weight: 205 lbs. * Radius: 2" min. * Type: 36" L roller	$399.00
2805-0020 - * Capacity: 20 gauge * Groove: Wire grooves, 1/8" & 3/16" * Net Weight: 105 lbs. * Type: 24" L roller	$299.00

Versatile for many applications.

Click to View all SKUs

Click to View Less SKUs

4064-0120 - * Length: 1" inside * Load Limit: 46 lbs. * Size: Trade size 8, wire gauge 11 (1/8")	$0.21
4064-0125 - * Length: 2" inside * Load Limit: 189 lbs. * Size: Trade size 526; wire gauge 1/4" (.250)	$0.57

Tennsmith's SR48 initial pinch slip roll is a heavy-duty production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The rolls are turned, ground and polished high carbon steel, providing the rigidity and resistance to wear and abrasion. The rolls and gears are mounted in…

Related Searches: Slip Roll | Tennsmith

Self-adjusting stripper for wire from 10 to 24 AWG Adjustable stopper controls the length of the core strip Swivel knob micro-adjusts for gauges smaller than 20 AWG Wire crimper crimps 10 to 22 AWG insulated, 10 to 22 AWG non-insulated and 7 to 9 mm ignition terminals Wire cutter extends versatility ProTouchâ„¢…